Honing Machine - Internal - Vertical

GEHRING ES4-1000-45 NC

Condition: good (used), Year of construction: 2004, TBT ML 200-2-800 deep hole drilling machine TECHNICAL DATA Type: ML 200-2-800 Year of construction: 2004 Control: Simatic OP17 Number of spindles: 2 Spindle distance: 12 mm Drilling slide stroke: 800 mm Drilling range: 1 - 10 mm Process: Single-lip drill Drilling depth: Immersion spindle: 110 mm Seal housing: 430 mm Rcsdpfx Aovcbg Sja Eek Sealing housing with steady rest: 400 mm Spindle drive: Power: 1.7 / 2.9 / 1.3 Voltage: 240 / 350 / 350 V Frequency: 100 - 800 Hz Weight: Approx. 2.6 T We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: used, Year of construction: 2005, CNC Turn-Mill Center CTX 410 - Year 2005 Heidenhain Plus IT control - 3-jaw chuck - Driven tool positions - Tailstock - Chip conveyor - Coolant tank Rcsdpfx Asxlthvja Esk

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Deckel Maho DMU 50 EVO Linear with ITNC 530 About the machine: Fast and flexible 5-axis simultaneous milling machine, in excellent condition. Fully equipped! Suitable for connection to automation systems! Technical specifications: - Control unit: Heidenhain ITNC 530 - Travel (X, Y, Z axes): 500/450/400 mm - Travel (B, C axes): 161.955/360° - Clamping surface, rotary table: 500 x 380 mm - Rapid traverse: X - 80 m/min, Y - 50 m/min, Z - 50 m/min, B - 40 rpm, C - 50 rpm - Spindle speed: 20–18,000 rpm - Tool holder: SK40 - Tool magazine with 60 positions - Network connectivity - Prepared for automation integration Accessories: - Internal coolant system with belt filter - Work area rinsing system - Heidenhain TS 649 probe - Coolant/air blast selection via M-code - Oil mist extraction unit Redpfxox Hwhrj Aa Ejck - Rinsing pistol - Chip conveyor - Hand-held control unit Machine dimensions (L x W x H): 3800 x 3200 x 2800 mm Weight: approx. 6,500 kg Inspection and test run under power at our facility is, of course, possible. We are also pleased to offer transport, installation, and commissioning at your location. Everything from a single source: We at Baumgärtner CNC GmbH are a company specializing in: - Service - Maintenance - Overhaul - Automation of DMG machines and those of other renowned manufacturers. We are there for you! From machine purchase, transport, and installation, through to commissioning and subsequent maintenance or repair work, you can count on us.

Condition: good (used), Year of construction: 2008, 1 used vertical machining center Manufacturer: Deckel Maho Model: DMU 80 monoblock Year of manufacture: 2008 Control: ITNC 530 Technical specifications X travel: 980 mm Y travel: 630 mm Z travel: 630 mm Control: iTNC 530 Total power requirement: 10 / 15 kW Machine weight approx.: 9.5 t Space requirements approx.: 4*4*2.5 m Additional information Equipment: Electronic handwheel Operation mode 4 Manual swivel milling head Motor spindle 12,000 rpm SK 40 / Clamping DIN 69872 32-tool magazine Redpfx Aaexa Eude Eock Fixed table 1250 x 700 mm Chip conveyor Coolant system

Year of construction: 2020, condition: excellent (used), • Model keeper 2000 with 5 drawer Spacious Tool Cabinet for Clear Storage of Your Complete Tools Dimensions H/W/D: 2100 x 1000 x 1050mm Empty weight: ca. 450kg 5 Vertical drawer pull-outs each H/W/D 2000x150x810mm Max. weight per vertical drawer pull-out: 1000kg • toolOrganizer 900 Lagerhaltung und -organisation von Werkzeugen und Zubehör Größe H/B/T: 1170 mm x 800 mm x 790 mm Rcedpfeikf E Iex Aa Eek Nutzhöhe: 900mm See also website zoller info

Condition: excellent (used), Year of construction: 2004, operating hours: 1,000 h, functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 350 mm, turning diameter: 200 mm, travel distance X-axis: 240 mm, rapid traverse X-axis: 12 m/min, Hembrug Mill-Turn Machine Model: Slantbed Mikroturn 100 CNC Siemens 840D Control Approximate Actual Run Time Hours: 1,000 Hydeostatic Spindle Hydrostatic Ways Scale Feedback Suspended Granite Bed Garnite Spindle Housing Coolant Pump Coolant Circulation Pump Pneumatic Bearing Purge Hydraulic Temperature Control Coolant Temperature Control Return Oil Pump and Reservoir for Remote Location of Hydraulic / Cooling Unit. Options & Additional Purchased Features: Tailstock Vacuum Pump for Vacuum Chucking Programable Controlled Spray Mist C-Axis Milling / Drilling Renishaw Tool Touch Probe Non-Contact Tool Rjdpfx Ajwcfgboa Esck Incoming Air Dryer / Filter Thousands of Dollars of Brand New Tooling: Live Center Tailstock Taper Adapter 8” Micro-Centric Pneumatic Chuck 3 Sauter Straight Live tooling heads 2 Sauter 90 degree Live tooling heads 1 Special VDI offset Tooling holder 16 VDI Tool Holders for Turning, boring, and on center drilling. Tool Pick-up Video System Additional Backup Hard Drive with Software Fully Loaded and Tested. Extra Siemens Control Pannel Complete Set of Manuals Machine Upgrades I added at additional cost. New Digital Hard Drive New Backup Hard Drive with software already loaded, plug and play ready, no downtime. New Z-Axis Heidenhain Scale Rewound Hydraulic Pump Motor, factory motor was running too hot for my liking. Replaced Operator Panel, back light on monitor went out, have the original, back light needs replacing. 50 Foot Extended Wiring Harness For Remote Location of Hydraulic / Cooling Unit.

Condition: used, Year of construction: 1998, honing diameter 90 mm stroke 490 mm throat 400 mm Rsdjt Hw T Sjpfx Aa Eock total power requirement 10 kW weight of the machine ca. 3.500 kg dimensions of the machine ca. m

Condition: good (used), Year of construction: 2004, operating hours: 109,078 h, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45,000 m/min, rapid traverse Y-axis: 45,000 m/min, rapid traverse Z-axis: 45,000 m/min, controller model: Siemens 840 D, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C30 U Siemens 840D Machine HOURS: 109,078 h Spindle HOURS: 22,117 h - Spindle HSK-A63 10,000 rpm - 32 tool pockets - Rotary table SRT 280 mm with integrated clamping system SK50 (if not required, this can be closed or alternatively converted for use as a zero-point clamping system) - External coolant supply - Internal coolant supply with paper band filter, 80 bar - Swarf flushing pistol - Chip conveyor - Handheld control unit - Automatic cabin door Rcodpfx Aajxcp Sle Eek - 32 tool pockets plus 87 additional ZM87 positions - Thermal compensation - BLUM tool measurement on carriage - Renishaw probe - Chip container - Status indicator light The machine has been thoroughly inspected, and there is a geometry inspection protocol as well as circularity test measurements available. The machine can be viewed and tested under power at any time. Very well-maintained condition.

Condition: used, Year of construction: 2011, Lathes Travel distance X: 270 mm Travel distance Y :120 mm Travel distance Z: 1200 mm turning length: 1135 mm max. turning diameter: 700 mm max. circulation diameter: 340 mm max. turning moment: 680 NM range of revolutions till: 4000 rpm Control: DMG powered tools Powered tools: 50 Scrapper chip conveyor Short bar loader magazine IRCO ILS-RBK 100/16 Various main spindle reduction sleeves NC-controlled workpiece removal device Rcodpfx Aewwv Ifja Esk Conveyor belt for transporting the workpieces out of the machine Coolant system 8/20 bar with immersion cooler Coolant spray gun Chip conveyor Oil mist extraction system Control cabinet cooling unit (up to 40 °C) 4-color signal light, connection for bar loader magazine Main spindle as integrated spindle motor ISM 102 Counter spindle as integrated spindle motor ISM 76 Easy-Tool Monitor Approx. 40 various quick-change collets size 100 (entire stock) Pneumatic changeover device Ø 100 mm Approx. 50 various tool holders, static and driven (entire stock) Installation elements Documentation

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Manufacturer DMG MORI Model DMU 75 monoBLOCK® Year 2017 CNC Control 3D HEIDENHAIN TNC 640 Table Table Surface 800 x 650 mm. NC Swivel rotary table simultaneous INCLUDED NC Swivel rotary table diameter Ø650 mm. Max Weight Allowed on Table 600 kg Turning Table (C Axis) 0.001º ( ±360º) Pitch Range (B Axis) -120 +120º Direct Measuring System INCLUDED Max part diameter 840 mm. Max part height 500 mm. Travels and feeds Longitudinal Traverse (X Axis) 750 mm Cross Traverse (Y Axis 650 mm Vertical Traverse (Z Axis) 560 mm Rapid Feed X axis 40.000 mm/min Working Feed X axis 40.000 mm/min Main spindle Max spindle speed 20.000 r.p.m. Taper HSK-A63 Main spindle power 35kW Main spindle torque 130/86 Nm Equipment Redpfsvvilcjx Aa Eock ATC INCLUDED ATC Positions 60 Internal Coolant 40 Bar INCLUDED Deposit with filter paper 500l INCLUDED Active control cabinet cooling INCLUDED Infrared Part touch probe Heidenhain INCLUDED Tool measuring Blum Laser INCLUDED Chip Conveyor INCLUDED Spray pistol with pump 2 bar 40 l/min INCLUDED 3D Quick Set INCLUDED Portable Handwheel HEIDENHAIN HR-510 Others Total power 49 kVA Programa running hours 14.486 Hours Program 11.412 Machine Weight 11.600 kg.