Magnetic vibratory finishing machine

Forplan Ergomag PM 3000

Year of construction: 2008, condition: ready for operation (used), overall weight: 3,800 kg, spindle speed (max.): 600 rpm, number of axes: 5, This 5s SAACKE UWIF cylindrical grinding machine was manufactured in 2008. It features a maximum spindle speed of 600 rpm and a powerful grinding spindle peak power of 16 kW. The machine supports a variety of workpiece sizes, with a maximum diameter of Ø 20 mm and a weight capacity of 1 kg. If you are looking to get high-quality grinding capabilities, consider the SAACKE UWIF cylindrical grinding machine we have for sale. Contact us for further details. • Workpiece carrier A-axis: Direct drive/hollow shaft motor; indexing accuracy ±15"; indexing possibilities 1–999; cumulative pitch error at 100 mm: 8 µm; speed max. 600 rpm • Tool holder: ISO 50 • Spindle clearance holding sleeve: max. 28 mm (with automatic clamping: Ø20 mm) • Nominal drive power: • Grinding spindle S1-100%: 7.5 kW; peak: 16 kW • X-axis longitudinal travel: 2 kW • A-axis workpiece carrier: 2 kW • Z-axis cross slide: 2 kW • Y-axis grinding head slide height: 2 kW • B-axis grinding head rotation (rotary table): 2 kW • Position measuring systems: • A-axis: Direct measuring system • B-, X-, Y-, Z-axis: Indirect measuring system • Resolution X/Y/Z: 0.0001 mm (0.1 µm) • Resolution A/B: 0.0001° • Electrical connection: 20 kW / 50 A; operating voltage 400 V, 50 Hz; control voltage 24 V; lighting voltage 230 V; backup fuse: separate supply from mains • Compressed air: 15–17 Nm³/h; pressure min/max 6/8 bar (600/800 kPa); quality ≥ Class 4 (ISO 8573-1) • Control & software: CNC NUM Axium Power 1050 with PC, program memory 512 k; NUMROTOplus software (dongle/hardlock required); zero points calibrated using enclosed measuring instructions (no marked reference points) Additional equipment • Workpiece changer options (automation): • Option 1: Pick-up design • Max. workpiece: Ø20 mm × 120 mm; 1 kg • Capacity per pallet: • Ø3.0–5.0 mm shank: 40 pcs Bsdpfeyiz R Ujx Ac Toll • Ø5.1–8.0 mm: 32 pcs • Ø8.1–11.0 mm: 28 pcs • Ø11.1–14.0 mm: 24 pcs • Ø14.1–20.0 mm: 20 pcs • Option 2: Chain loader magazine (with gripper unit) • Capacity: 64 workpieces • Max. workpiece: Ø32 mm × 200 mm; 2.5 kg • Features: Chaotic loading of different workpieces; automatic changing of collets possible • Holding sleeves: Ø6, 8, 10, 12, 14, 16, 20 • External chain loader option: increases machine weight to approx. 3,800 kg and space to 3,000 mm × 1,875 mm • Coolant filter system (TRANSOR): To be provided by customer; air for backwashing approx. 700 Nl/min for 5 min every 6–9 hours

Condition: ready for operation (used), Year of construction: 2006, Speeds up to: 2250 rpm Feed rate: 0 - 300 mm/min Drive power per motor: 2.9 kW Electrical connection: 400 V Weight: 395 kg Bljdpfx Acoyfgd Ej Tol Required space: 4100 x 1670 x 1450 mm

Condition: not inspected (used), Year of construction: 1996, empty load weight: 800 kg, Diameter 1.5 - 160 mm Bsdpfx Aswgm Saoc Tjll Stroke 400 mm Weight 800 kg Tools

Year of construction: 2019, condition: ready for operation (used), number of axes: 2, This Nikon V-12BDC was manufactured in 2019. It features a 305 mm screen diameter, a measuring stage of 250 × 150 mm, and integrated XY and angle digital displays for precise measurements. The machine includes a 3-position objective turret for quick magnification changes and high-quality halogen illumination for clear imaging. Ideal for production control and precision mechanics. Contact us for more information about this machine. • Laterally correct image (no reflection) for easy evaluation • 3-position objective turret for quick magnification selection • Magnifications: 10×, 20×, 50×, 100× • Screen diameter: 305 mm • Measuring stage travel: 250 × 150 mm (8" × 6"); rotary stage type 2 • Maximum workpiece height: 100 mm • Integrated XY and angle digital display for precise readings • Illumination: combination of contour (transmitted) and vertical (incident) light • Light source: 24 V / 150 W halogen for high-quality projection • 4-fold condenser in transmitted light with automatic illumination adjustment to magnification • Optics: semi-transparent mirror for clear incident-light image; telecentric lenses for distortion-free imaging across the full field • Focusing via movable optical head (stage remains stable to avoid measurement deviations) • Measurement accuracy: contour illumination ±0.1%; inclination/area illumination ±0.15% Blodsx D I Etopfx Ac Tjl • Solid construction with precision-engineered guides; workshop-ready and easy to operate • Proven Nikon quality, made in Japan • Large projection area suitable for medium-sized and complex workpieces • Quick magnification changes via turret • Ideal for production control, toolmaking, precision mechanics, and sample inspection • Flexibly upgradeable with digital interfaces or SPC connectivity

Condition: good (used), Rotary vibrator, vibratory finishing system, vibratory finishing machine, vibratory finishing rotary vibrator, trowal system, continuous vibrator, vibration conveyor, oscillating conveyor -Manufacturer: circlon, round vibrator Trowal vibrator with soundproof hood -Total volume: 230 liters -Type: CLS-230 -Working container: elastically mounted -Working basin width: 250 mm -Outlet: approx. 200 x 260 mm Blodoiy Ef Aepfx Ac Tol -Working basin height: 510 mm -Equipment: manual separating flap, infinitely variable engine speed via variator gear, liquid connection -Machine for: deburring, polishing, rounding edges -Transport dimension: 1700/1600/H2240 mm -Total weight: 1150 kg

Condition: used, Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts. Working width: 1350 mm Maximum part weight: 400 kg Blsdpfx Aom Rpy Rsc Tjl Wide belts with abrasive belt unwinding: 2620 mm As standard with vacuum hold system, optional with magnetic hold system By using 2620 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 3 internal machining units and an additional external machining unit. The high rigidity of the machine structure and the feed table of this machine, combined with the advanced mechanics and electronics, make this series a universal machining centre for deburring and finishing. Please, contact us for getting more information and pictures on mail(at) or *

Condition: not inspected (used), Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Bedpet Tqy Eefx Ac Tjll Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: used, Tool presetting machine GILDEMEISTER-DE VLIEG, type EGS 5045 / Microset DPS 100 Serial No. 83-10-102, Year of manufacture 2002 Travel X-axis: approx. 400 mm Travel Z-axis: approx. 400 mm Tool holder in the mounted rotary table: Ø 50 mm Pitch circle diameter of the tool holders in the mounted rotary table: Ø 340 mm Internal taper in the mounted rotary table: Ø 245 mm Tool holder plate as a rotary table with 8 mounting holes Ø 50 mm Centering diameter of the mounted tool holder plate: Ø 102 mm Blsdpfohbal Dox Ac Tjl Rotatably mounted flange with centering diameter: Ø 102 mm Rotatably mounted flange with outer diameter: Ø 155 mm Rotatably mounted flange with 3x M10 mounting holes, pitch circle: Ø 130 mm Mains connection: 230 volts, 50 Hz - Measuring electronics Microset DPS 100 - Rotary table with 8 tool positions - Interfaces: 1x RS232, 2x measuring system (X/Z) - Profile projector with screen Ø 100 mm, magnification 20x and two circle ground glass screens - Ground glass screen fixed with crosshair - Axis movement via manual quick adjustment with pneumatic clamping - Fine adjustment via handwheels - Rotatable rotary table with pneumatic clamping - Metal base with 3 drawers Footprint L x W x H: 1100 x 1000 x 800 mm Weight: 400 kg Good condition

Condition: used, Year of construction: 2015, operating hours: 16,432 h, functionality: fully functional, 𝗦𝘁𝗮𝗿 𝗦𝗥20 𝗝 𝘁𝘆𝗽𝗲 𝗖 Year 2015 Production hours : 16432 h Oil tank Bledpfxjzmw Dkj Ac Tel Iemca bar loader Fanuc command 31i Model B Parts belt conveyor Fanuc command 31i Model B

Condition: ready for operation (used), Year of construction: 2005, spindle bore: 19 mm, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Maximum workpiece length: 200 mm - Spindle speed: 15,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.001° SUB-SPINDLE - Maximum bar diameter: 16 mm - Z-axis travel: 80 mm - Spindle speed: 10,000 rpm - Spindle drive power: 1.1 kW - Minimum C-axis resolution: 0.001° Bsdpfx Aow Rcamsc Toll TOOL TURRET 1 - Number of stations: 10 - Number of live stations: 4 - Driven tool speed: 6,000 rpm FRONT TOOLING - Number of positions: 4 SUBOPERATION TOOLING - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 200 V - Total power consumption: 8 kW WEIGHT AND DIMENSIONS - Required space: 1850 x 1610 mm - Machine height: 1050 mm - Machine weight: 2,050 kg ACCESSORIES - Control unit: Fanuc 31i - Guide bushing - Parts removal - Parts ejector - Coolant tank - Bar feeder: IEMCA BOSS 332r - Electrical transformer