Receiving belt

Forderband Transportband Conveyor

Condition: ready for operation (used), The item for sale is a conveyor belt with an approximate length of 3 meters. Belt width: 130 mm. I have 3 units available for sale. The price is per unit. Possibility of transport. Rodpfx Ajwt Rktecvebw

Condition: good (used), Year of construction: 1999, Briquetting press type GP 120 Tandem Briquetting press for briquetting chips, wood chips and dust incl. automatic fill level indicator - Briquette diameter: 60 mm - Pressing capacity: 40 - 120 kg/h * 2 = 80 - 240 kg/h (depending on material) - Hopper opening: approx. 1,900 x 1,900 mm - Hopper height: approx. 1,800 mm - Hopper capacity: approx. 6.0 m³ - Drive power: 7.5 kW, 400 V, 50 Hz - Switch cabinet: available on both sides - Operating hours: 13,725 h or 13,005 h - Hydraulic unit: approx. 300 litre tank for hydraulic oil - Weight: approx. 1,100 kg * 2 = 2,200 kg Rbedpfxoupwx Hj Acvew Used briquetting press in good condition W tong cylinder, tongs (RB 120 reinforced), tong connection flange renewed on one side (left in conveying direction) briquetting | briquette press | briquetting presses | briquette press | briquetting

Condition: ready for operation (used), The subject of my auction is a conveyor belt with a length of 10 m and a belt width of 0.6 m. Possibility of transport. Rbjdpfxeyidbto Acvow

Condition: ready for operation (used), The item for sale is a conveyor belt with a length of 1.2 m and a belt width of 0.2 m. The price is for 1 piece. Possibility of transport. Rjdsv D Dkcepfx Acvjbw

Condition: used, operating hours: 20 h, Fuel type: Diesel Rsdouu Df Dopfx Acvobw

Condition: ready for operation (used), The items offered in my auction are belt conveyors approximately 3 meters long with a belt width of 0.4 meters. Possibility of transport. Rbodpfew Dx T Dex Acvjw

Condition: ready for operation (used), For sale: conveyor belt as shown in the pictures, length 24 m, belt width 0.8 m. Possibility of transport. Redpfxew U Ng Uj Acvobw

Condition: good (used), Manufacturer: Haver & Boecker Documentation available Mechanical conversion from 50 kg to 25 kg bags in 1999 Control system: Siemens S7 Rbedpfxev Sz Tds Acvow Upgraded to the latest standard with spare parts support in 2015 Supported bag types: Quicklime, hydrated lime, cement, gypsum

Condition: ready for operation (used), The item for sale is a conveyor belt with a length of 10 m and a belt width of 0.4 m. Possibility of transport. Redpfxev D Dirj Acvsbw

Condition: ready for operation (used), The item of my auction is a conveyor belt with a length of 10.5 m and a belt width of 0.65 m. Possibility of transport. Rjdpfxew Dx Sye Acvsbw

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: Rbsdpfxeq Nfuzs Acvsw - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance. Technical details We have different options for different requirements, please contact our team for more info.

Condition: ready for operation (used), The subject of my auction is a 12.5m long conveyor belt, 0.5m wide Rbsdpoq Ru Hmsfx Acvsw Possibility of transport. Possibility of transport.

Condition: ready for operation (used), Year of construction: 1996, I am selling the conveyor belt shown in the photos. Please feel free to contact me for more information. Rjdpfx Ajxlaa Sscvebw

Condition: used, Year of construction: 2002, operating hours: 11,800 h, machine/vehicle number: NEW-12, Manufacturer: Komatsu Type: WA 400-5H Year of construction: 2002 Gross vehicle weight: 21180 kg Power: 140 Kw Operating hours: 11800 Rjdpfx Asiaipascvsbw Central lubrication system scales Tires 50 % ROPS cab Incl. bucket Sale only to tradesmen or export Subject to prior sale and errors excepted

Condition: ready for operation (used), The subject of my auction is a conveyor belt, 15 meters long with a belt width of 0.65 meters. Rbodpfoyvqv Usx Acvjw Possibility of transport.