Conveyor belts

Forderband Transportband Conveyor Conveyor

Condition: ready for operation (used), The item for sale is a conveyor belt with an approximate length of 3 meters. Belt width: 130 mm. I have 3 units available for sale. The price is per unit. Possibility of transport. Rbsdswt Rktjpfx Acvew

Condition: new, saw blade diameter 420 x Ø 40 mm cutting diameter 170 mm cutting length 410 mm dimensions of saw-blade 420x3,2/2,4x40 mm turning speeds 3500 U/min Dust suction hood 100 mm total power requirement 3,0 kW weight of the machine ca. 120 kg dimensions of the machine ca. 1300 x 800 x 1600 mm - Cross-cut and miter saws for cross-cut cuts - Miter adjustment on both sides (60 ° / 45 °), with fixed stop - Shifter cut on both sides 45 °, with fixed stop - Stable cast iron construction - Precise linear bushing guide on the tool slide hardened and ground steel shafts - manual saw feed - Saw blade infinitely adjustable in height - nozzle for opt. Suction Cutting data: - Cutting length at 90 ° = 410 mm - Cutting height at 90 ° = 170 mm - Cutting length at 45 ° = 290 mm Rbsdpfx Acexabztsvew - Cutting height at 45 ° = 115 mm Special accessories included: - Adjustment of shifter cut via hand crank, both. adjustable (45 ° / 45 °) - HM circular saw blade 420x3.2 / 2.6x40 mm Z = 108 FTZ neg. For aluminum and plastic - hydraulic feed brake, infinitely adjustable - pneumatic material clamping from above consisting of: 2 vertical clamping cylinders, adjustable, with hand lever valve - machine stand

Condition: ready for operation (used), The items offered in my auction are belt conveyors approximately 3 meters long with a belt width of 0.4 meters. Possibility of transport. Rjdpow Dx T Djfx Acvobw

Condition: ready for operation (used), For sale: conveyor belt as shown in the pictures, length 24 m, belt width 0.8 m. Possibility of transport. Rjdpfew U Ng Uox Acvobw

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, operating hours: 150 h, excellent condition BIRLIK PBM 35 profile bending machine, pipe bending machine for sale manufacturer BIRLIK Makina type: PBM 35 year of manufacture: 2007 Shaft diameters: 50mm Rbjdjxc N Rhepfx Acvsw Roll diameters: 155mm Upper roller diameter: 148mm Working speed: 4.5m/min Motor power: 1.5kw Voltage: 3phase 380v 50Hz 3.8A Machine width: 700mm Machine length: 900mm Machine height: 1400mm Machine weight: 375kg Bending capacity: I-steel - flat 120 x 15 (d 750) mm I-steel - on the edge 60 x 10 (d 800) mm Angle steel 50 x 5 (d 1200) mm Round material 35.0 (d 800) mm Max. pipe diameter 70 x 2 (d 1200) mm Square material 50 x 40 x 3 mm

Condition: ready for operation (used), The item of my auction is a conveyor belt with a length of 10.5 m and a belt width of 0.65 m. Possibility of transport. Rbedpfx Acsw Dx Sysvsw

Condition: ready for operation (used), The subject of my auction is a conveyor belt, 15 meters long with a belt width of 0.65 meters. Possibility of transport. Rjdpoyvqv Uefx Acvjbw

Year of construction: 2020, condition: new, Transport systems Rjdjfz U S Eepfx Acvjbw Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: ready for operation (used), For sale: Conveyor belt as shown in the photos, length 2.6 m. Belt width: 0.2 m. Possibility of transport. Rbsdpfx Acjyvg Aqsvjw

Condition: ready for operation (used), The subject of my auction is a 9.5m long conveyor belt, 0.65m wide Possibility of transport. Possibility of transport. Redpfx Aoyuw Iaocvobw

Condition: used, Used 3D Printer EOSINT M 270 low operating hours (4910) Rodpfewd Ulvox Acvobw

Condition: ready for operation (used), The subject of my auction is a conveyor belt with a length of approximately 1.2 m and a belt width of 0.8 m. Rbjdpfxsytr Tus Acvsw Possibility of transport.

Condition: ready for operation (used), The item in my auction is a conveyor belt with a length of 2m and a belt width of 0.5m. Rodjytr Dgepfx Acvjbw

Condition: used, functionality: fully functional, machine/vehicle number: 001645U, For Sale Used Abus single girder overhead crane ± 19,500 mm x 5,000 kg. * Stored indoors * Technically 100% functional and fully inspected Rjdpfxoygrivs Acvobw All our new and used cranes that we deliver and install come with warranty! Our offered cranes can optionally be supplied with: * Adjustment of length and/or height and, if required, re-painting * Busbar system / power supply * Radio remote control * Tandem control * Installation and inspection At Jan Reiling B.V. you can also find: * New lifting installations * Spare parts for your lifting equipment * Jib cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection and certification of your lifting gear In addition, we keep our own stock of approximately 15,000 Demag spare parts. For more information, please visit the Jan Reiling B.V. website. Cranes, crane, gantry crane, workshop crane, warehouse crane, hoist, krane, hallenkrane, brückenkrane, bruckenkrane, werkstattkrane, lagerkrane, hebezeuge, cranes, universal crane, hoist. Overhead crane, laufkrane, overhead crane. Single girder, einträger, single girder. Chain hoist, kettenzüge, chain hoists.

Condition: ready for operation (used), The subject of my auction is a conveyor belt with a length of approximately 13 m and a belt width of 0.5 m. Rbsdpfoytrxdex Acvew Possibility of transport.