Chain conveyor system conveyor belt

FLEXLINK 12.5m Aluminium-Fördersysteme Kunststoffketten

Condition: new, Year of construction: 2021, Hiwell batter mixer II Hiwell DJJ100-II batter mixer utilizes ingenious mixer to evenly combine water and batter. This stainless steel mixer is applicable for high viscosity batters such as Tempura batter. Advantages 1. Our parry battering machine involves utilization of cutting-edge control system, thus realizing repeatable operation cycles of high-speed mixing, low speed mixing and alarm on application of batter. Therefore, batter is prevented from sedimentation. 2. Mixing tank in this fruit battering equipment is endowed with separation layer, which is aimed to keep batter temperature between 10-20℃ by ice or cold medium. 3. Our batter mixing equipment comes with batter output pump, which offers excellent connectivity to battering equipment to form batter feeder. Nsdsg Unrpepfx Aa Eslk 4. Thanks to reliable protection system and Siemens electronic components, thisfruit processing equipment is operator and maintenance friendly. 5. The entire batter mixer is manufactured with quality stainless steel to meet HACCP standards. 6. Optional battering dosing device is available for more accurate viscosity control.

Condition: excellent (used), We offer for sale the following Gránit-Mill 90 wood pelletizing presses, in the condition shown in the pictures, after the pelletizing plant has ceased operation. The machine is made in Hungary, our company has an excellent relationship with the manufacturer, and we can help you purchase parts. Drive and sticker handling is similar to the old CPM machines. The presses (with pine) are capable of 1.2-1.5 t/h/pc. Nlodpfx Aajp T Twuo Esk Price: €29 900/press €49 900/ 2 presses Included in the price: pre-tank control cabinet dosing screw permanent magnet conditioner press motors pre-tank 1.1 kW feeder 1.5 kW conditioner 15 kW tablecloth 0.55 kW main engine 90 kW 3 stickers all three are made by La Meccanica barely used It has a 6 x 45 mm hole for pine 2 sets (total of 4) notched collars spare parts screws nuts breaker pin assembly aids Status: Engines and drives intact. Both machines tested. It is recommended to replace the neck bearing of the right machine. Smaller parts (such as the pellet cutter) must be replaced. There is no water supply, the place is prepared. The greasing method is manual, but central greasing can be easily installed. Summary: The machine on the left can be put into production immediately. It requires a minor service on the right side. If necessary, the machine can be tested at a pre-arranged time. Not in production, must be prepared. It is possible to check the mechanical durability and volume density of the produced pellets on site!

Year of construction: 2018, operating hours: 600 h, condition: like new (used), Belt Dryer Capacity - 1t /h Year - 2018 Working hours - 600 The system is composed of : - Hooper Feeder - Drying bench with perforated mat mesuring 10x2 - Hot water heat exchanger - Max, outlet temp . - 46C - Drying air temp . max. 70C Nlsdpev Ny E Tefx Aa Ejk - Water temp at the exchanger - 90C - Termal poer - 450 kwh - Air intanke fan - Dust cycloning system - Electrical control panel with PLC

Condition: used, Pellet presses Njdpfx Ajw Iy T Ssa Ejlk Manufacturer: Bühler Model: RPWPR 900.138 EX 4 presses - Bühler 3-4 tons per hour 4 mixers 4 feed screw conveyors 20 m long stainless steel chain conveyor 16 m long output conveyor Soft starters

Year of construction: 2024, condition: new, Overview - of the different variants *Not every position is required: Optional: Nlsdpfxsff Sbio Aa Esk -Bale shredder MHB from 24.990 € net -MHZ straw mill from € 7,980 net -Special hopper 970 € net -Cyclone from € 3,750 net -Sheet metal silo demonstrator with discharge (only sketched in the picture) *optional, if you want to load with the wheel loader Unit price net from € 14,750 - Demonstrator -Dedusting auger - length approx. 4 m 4 sieves are mounted on the underside, which are extracted. Unit price net from: 9.750 € - Extraction parts / hoses flat rate 945 € net - Complete control system Net unit price: € 2,750 -Demonstrator extraction unit MMJET 160 Demonstrator, with cleaning Connection 160, fan 2,2kw air capacity 1850m³ /400 V Automatic compressed air cleaning Unit price net from: 6.950 € -Baler B 400 Bales approx. 400x400x800 (height adjustable) Up to 30 bales per hour with + - 20 kg from 59.995 € net *A reference system (baler) is located in zip code: 64579 Gernsheim Technical data: Bale size (WxDxH): 400 x 400 x 800 (height can be adjusted on request) Bale weight +/- 20 KG (depending on material) Capacity: approx. 30 bales per hour Storage container approx. 0.7m³ capacity Filling level sensors for min./max. filling level in the container Hydraulic pre-compressor Hydraulic compression ram Hydraulic unit, valve block with oil tank Pump 18.5 KW / 50 liters Rollers in the bale chamber for easy bale push-off Dimensions (l x w x h) 3105x2830x2455 mm Weight approx. 1500 KG mütek baling presses / wrapping machines are designed for the production of bales from a wide variety of materials such as shredded micanthus or elephant grass, wood chips, sawdust and shredded straw. straw. The machine is characterized by a robust design that guarantees consistent quality in continuous operation. quality in continuous operation. The baler compacts the material filled into the storage container without the addition of binding agents and packs the material into plastic bags. The volume of the material can be considerably with the baling press. The volume reduction rate depends on the material. The maximum material moisture content must not exceed 18 % Atro. The container of the mütek baler can be fed automatically or manually and has a volume of approx. 0.7 m³. volume of approx. 0.7 m³. Containers with a larger volume or with an attached suction and filter system as a complete disposal unit are also available. In addition to automatic filling via deduster, mütek also offers filling by means of screw conveyors. With both variants, automatic automatic dedusting is possible. mütek baling presses are equipped with a control cabinet for the control system. In the standard version, the dimensions of the bales (width x depth x height) are 400 x 400 x 800 mm. However, the height can be adapted to your requirements on request. The following advantages arise in the production of bales: - simple and safe storage - No loose dust - Minimization of the storage volume - Low transport volume *Requirements for source material: - dry (max. 30 % ATRO) - Maximum length 35 mm

Condition: good (used), Year of construction: 2018, operating hours: 6,310 h, functionality: fully functional, machine/vehicle number: 112029, travel distance X-axis: 650 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 305 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate Z-axis: 20 m/min, controller model: Brother C-00, table width: 800 mm, table length: 400 mm, table load: 200 kg, spindle speed (max.): 10,000 rpm, coolant supply: 30 bar, distance table to spindle center: 555 mm, distance table center to spindle nose: 625 mm, tool length: 200 mm, tool diameter: 80 mm, power: 26 kW (35.35 HP), Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, BROTHER Speedio R650X1 HT machining center, first commissioning 2019 22 tools 26KW spindle drive High Torque Spindle holder BBT-30 10,000 revolutions Nlsdpfxjq Hdzbe Aa Eok Rotary shuttle table low version 2 pallets 30 bar internal cooling Twin chip disposal system - 2 chip conveyors in one system Emulsion mist extraction for cooling lubricant

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: sn. 816, feed length X-axis: 2,600 mm, feed length Y-axis: 1,300 mm, total width: 4,000 mm, total length: 3,600 mm, total height: 3,500 mm, warranty duration: 12 months, cutting height (max.): 1,300 mm, space requirement length: 4,200 mm, space requirement width: 4,500 mm, space requirement height: 3,600 mm, Polish manufacturer of machines and equipment for cutting and processing polyurethane foam with over 25 years of experience offers for sale a brand-new automatic horizontal cutting machine, Model: TYPE PARK. The machine features a stable and robust steel construction. Cutting is performed by the movement of the cutting frame along the X and Y axes, while the table remains stationary. The cutting frame is driven by two reinforced toothed belts and moves on linear bearings along the X-axis. In the Y-axis (up and down movement of the frame), the feed is powered by two ball screws and linear bearings. The machine supports both single-sided and double-sided cutting modes and includes an automatic cutting correction system for double-sided cutting. Machine equipment includes: Automatic, self-adjusting saw blade tensioning system Nledpewq Dvdofx Aa Eek Stationary table with powered conveyor belt for easy material loading Automatic cutting length measurement Quick-change system for the saw blade Automatic material clamping system Working parameters: Cutting width: 2100 mm Cutting length: 2500 mm The machine is fully enclosed with safety fencing and equipped with safety light curtains at the loading and unloading zones. As the manufacturer, we provide installation and servicing within the EU. The machine is CE certified. We also offer a wide range of machines and devices for cutting foam and mineral wool. We invite you to explore our full range of products.

Condition: ready for operation (used), Year of construction: 1990, Böcker LH 710 Nlsdpfohh Swkex Aa Ejk with electro-hydraulic drive year of construction 1990 No.3216/2 nominal load 300kg dead weight 255kg lifting height 7100mm Overall height 2200mm

Condition: new, Year of construction: 2024, machine/vehicle number: 302340, Profile Bending machine KB Türkei model MB 30 bottom shaft 30 mm top shaft 35 mm two rollers driven with basement capacity: up to round tube 48 x 3,0 mm flat material 50x10 mm square tube 40x40x3,0 mm Nledpfxod S Uf Ss Aa Ejk weight 170 kg motor 0,75 kw 400 Volt 50 Hz 3 ph.

Year of construction: 2024, condition: new, Magnetic separator for spool transport line Pipe magnet with 4 magnetic plates ( permanent magnet ) Nodpfxjcqvhxj Aa Eslk Hinged door for easy removal of the metal parts Tube diameter: 180 mm Available immediately Location: From stock 54634 Bitburg