Punching press

FINNPOWER SG6

Condition: ready for operation (used), Year of construction: 2005, operating hours: 51,849 h, functionality: fully functional, machine/vehicle number: SG602005, sheet thickness (max.): 5 mm, travel distance X-axis: 2,584 mm, travel distance Y-axis: 1,560 mm, punching force: 30 t, punching diameter: 89 mm, number of slots in tool magazine: 20, TECHNICAL DETAILS Punching force: 300 kN Number of tool stations: 30 Max. punching diameter: 89 mm Material thickness (standard): 8 mm Tooling and Material Material thickness aluminium: 8 mm Material thickness steel (St 37): 6 mm Material thickness stainless steel: 3 mm Max. material length: 3,061 mm Max. material width: 1,528 mm Max. sheet weight: 200 kg Lrsdoww Ihdepfx Ad Aek Positioning and Axes X-axis travel: 2,584 mm Y-axis travel: 1,560 mm Max. X/Y axis speed: 80/60 m/min Max. traversing speed: 100 m/min Max. stroke rate: 1,000 strokes/min Accuracy Hole positioning accuracy (DIN 872): ±0.1 mm Angular deviation (DIN 5520): ±0.1° Rotation and Control Turret rotation speed: 30 rpm Tool change time: 1 - 3 s Control system: Siemens SINUMERIK 840 D MACHINE DETAILS Operating hours: 51,849 h Connected load: 80 kVA Weight: 28,000 kg Sound pressure level: 75 dB Power Supply Electrical connected load: 33 kVA Hydraulic oil capacity: 330 l EQUIPMENT - Official Prima Power Service - New cutting blades in 2023 - TU6 tapping unit - Forming system - 4 sheet clamps - Tool lubrication - 30 tonnes punching force - Lifting scrap conveyor - C1500/1 - SPB buffer - STR portal stacking robot

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, punching force: 18 t, working range: 30,001,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,600 mm, Very well maintained and fully serviced used Large format Trumpf 3000 cnc punch press for sale Manufacturer TRUMPF Type TruPunch 3000 (S11) Year 11/2012 Working area 3000 x 1500 mm - without reposition Working range on cross-side (X-axes) 3000 mm Working range along (Y-axes) 1600 mm Large throat 1600 Complete with multi tool capability Ledoxrnggopfx Ad Ajrk Type S11 Video available upon request

Year of construction: 2026, condition: new, -Drum diameter 1600mm -Drum length 2880-3880-4880mm -Working length 2000-3000-4000mm -Grid holes according to your specifications -The screen consists of a closed profile Lsdpfjq T Sp Hex Ad Ajrk -A cleaning brush with a diameter of 300 mm is mounted on the screen and along the entire length of the working part -Flat bar blades installed in the center of the drum allow the material to be poured -Drum rotation speed approx. 11.5 rpm - Sieve feed sieve via gearmotor- Drum transmission via gearmotor + 2 rubber drive wheels diameter 230 mm - Sieve equipped with electrical panel - Gravity feed hopper, dimensions Width 1600 mm, Length 1400 mm, Height 1200 mm - 12 months warranty - Made in Europe - CE compliant

Condition: excellent (used), Year of construction: 2002, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, workpiece height (max.): 1,230 mm, workpiece diameter (max.): 1,250 mm, spindle speed (min.): 18,000 rpm, spindle speed (max.): 18,000 rpm, Heidenhain iTNC 530 control Tool changer for 60 tools Automatic head +180/-7° stepless HSK A63 Number of pallets: 2 pcs Ledpfx Aew Ngipod Aerk Pallet size: 1000*800 mm

Condition: good (used), Year of construction: 2012, functionality: fully functional, Control: SIEMENS Spindle bore: 65 mm Turning length: 660 mm Max. speed: 6,000 rpm Counter spindle Z= 700 mm Lsdpeyi Uk Iefx Ad Aork TOOL CARRIER 1 with milling spindle Milling spindle: 7,200 rpm B-axis: 360° 14 stations with driven tools Tool speed: 7,200 rpm Travel: X= 230 / Y= ±65 / Z= 845 TOOL CARRIER 2 14 stations with driven tools Tool speed: 7,200 rpm Travel: X= 140 / Y= ±45 / Z= 810 Chip conveyor Filter Bar feeder INDEX MBL

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Lodpfxowp Rqfs Ad Ajrk Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Condition: excellent (used), Year of construction: 2012, Model Amada HFE M2 220t 4m, 8 axis Press Brake Year 2012 Tonnage 220 tonnes Max. Bend Length 4280 mm Stroke Length 200 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 195L Lodpfxjv S U Ize Ad Aerk Motor Power Weight 17450 Kg Dimensions Machine Length 5070 mm Machine Depth 2075 mm Machine Height 3085 mm Distance Between Side Frames 3760mm Beam width 180 mm Table height 960 mm Open Height 470 mm Throat Depth 420 mm

Condition: reconditioned (used), functionality: fully functional, approx. 4.5 m long infeed and centering table Drive via chain from the feed motor Centers the logs in the middle of the rotor Debarking machine VK 26 4 main cutters 4 pre-cutters 30 KW main motor 11 KW feed unit Ljdpfju Hmacjx Ad Aerk non-driven extraction table Machine workshop checked Machine cleaned and repainted

Condition: refurbished (used), FULL LINE of Drilling, max working width mm 3200, with fast automatic handling equipment. Composed of the following machines: A) LOADER (Portal) "RBO" Winner C 3200 with double pick-up and central motorized rollers table. With 2 on-ground motorized rollers ways to in-feed the piles (stacks) of panels to loader. B) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° C) 1st Auotmatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units D) 2nd Automatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units E) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° Lsdpfxodfgg Is Ad Aerk G) UNLOADER-STACKER (Portal) "RBO" Winner SC 3200 with double pick-up, with double storage station, with central motorized rollers table. With 2 on-ground motorized rollers ways to out-feed the piles (stacks) of panels from the Unloader

Condition: excellent (used), CPM 2000 granulator, 90kW engine die diameter 410mm We have several pieces Lrjdpewcdpnjfx Ad Aok