Other

FESTO DNU-40-125-PPV-A 14137

Condition: new, Year of construction: 2023, Highly efficient series production Clamp – enter the cutting dimension – start. Automatic saws with loading are a standard of rational series processing of bar and bundle material. Cutting area max. up to 290 x 320 mm. Ffodpfx Agofww Sqj Dsw Furnishing Automatic hydraulic sawing machine with NC control for cutting from 0° to 60° right, complying with all CE safety standards The device has 9 programs, each of which composed of 99 individual steps, with a total number of approx. 890 cutting positions, with corresponding piece counter Function: material feed closing fixed vice Blade rotation, distribution of emulsifiable liquid, temple lowering until the end of the cut and return of the feed carriage until specified amount bail return and stop the blade rotation by cooling liquid distribution cycle repetition Hydraulic feed cut by cut with no length limit Numerical control of quantity and length of cut Hydraulic control center with cutting pressure adjustment The saw blade is tensioned electro-mechanically by means of Microswitch monitored. Device with brush for belt cleaning Bimetallic strip 3200 x 27 x 0.9 mm Section thickness 1.2 mm Material feed stroke 600 mm Motor hydraulic center 0.75 kW Electric pump 0.09 kW to cool the belt It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: excellent (used), Band saw welder Viscat model FW400 Ffodpfx Agewup U Ts Dsw

Condition: used, Year of construction: 1988, Distance between centres 1200 mm Speed A) 70 - 380 U/min. Fjdpfxok Sat Do Ag Dsfw turning speeds B) 380 - 2000 U/min weight 2,2 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: refurbished (used), Year of construction: 2024, Manufacturer: Elumatec Type SA/ SAS 142 Overhaul year: 2024 Saw blade max. carbide: 500 mm Drive power saw motor: 4 KW Saw motor speed: 2800 min-1 Cutting speed saw blade 500 mm: 4400 m/min Saw height control: infinitely variable, fully electronic Working range square 90° max.: 130 x 130 mm Working range flat: 90° max.: 190 x 130 mm Working range round: 90° max.:150 mm Fjdpfeuiy Nysx Ag Dofw Pneumatic feed length: 5-560, 10-1120 mm Compressed air connection, on site 6 bar Weight(saw)approx.: 800 kg Dimensions LxWxH (saw)approx.:2900mm x 1400mm x 1500mm Installation area LxW: 2900mm x 1400mm Additional description Elumatec SA/ SAS 142 4KW Retrofit Elumatec SA 142 4KW Retrofit Fully automatic sawing machine for non-ferrous metal and plastic After completion of the retrofit, the machine is in mint condition, both technically and visually. The machine will be overhauled in our company at the customer's request. Among other things, the following points were renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI control panel - New electrical components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve terminals - Maintenance of minimum lubrication system - Replacement of general wear parts - Overhaul of the cab Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the warranty. Optional: - Extension of the sawing area to flat 90° max.: 300 x 120 mm - Splitting extension (for a high-quality cut surface without return marks) - Servo-controlled material feed - Saw blade feed Servo-controlled - Mass clamping device Feed vice - Delivery and installation on your premises - Training of your employees

Year of construction: 2000, condition: excellent (used), daylight width: 170 mm Ffsdpfx Asp E Eglsg Dow speed: approx. 25 m/min working direction: any work roll diameter: 120 mm barrel length: 150 mm backup rolls: backup block/chain

Year of construction: 1980, condition: good (used), A used very well preserved cycle controlled lathe from Weisser Heilbronn with SIEMENS control. centre distance 2000 mm centre height 295 mm Swing over bed 600 mm Swing over cross slide 260 mm Swing diameter in the bend 800 mm Fedpfxogyy I Aj Ag Defw Total length of the crank 375 mm Bed width 450 mm Plan travel X-axis 350 mm Longitudinal travel Z-axis 1850 mm Spindle nose DIN 55022 size 8 Spindle speed Number 18 14 - 1400 rpm spindle bore 71,5 mm Diameter of front bearing 110 mm feed range 0,01 - 40,95 mm/rev rapid traverse 8 m/min Direct current drive 15 kW 400V 50Hz Max. permissible torque at the spindle 2500 Nm Tailstock quill 80 mm quill stroke 250 mm inner taper quill MK 5 Length x width x height Weight of the machine 5500 kg Accessories Tailstock Pneumatic three-jaw chuck with interchangeable jaws 315mm Quick change holder "MULTIFIX "in front of the center size "C Quadruple turret behind the center Tool holder Coolant device Pneumatic steady rest Technical data and dimensions: Errors excepted. Videoconference via whatsapp possible by appointment

Condition: excellent (used), strip width: 6 - 200 mm strip thickness: 6 – 0,5 mm Ffjdpep E Ed Rofx Ag Dew speed: max. 100 m/min working direction: any work roll diameter: 250 mm barrel length: 250 mm roll core for rolling rings: 190 mm

Year of construction: 1998, condition: good (used), Used Emmegi Automatica 550 Single head cutting-off machine from 1998 in good condition for 90 degress cutting of aluminium profiles, with pneumatic bar feeder and stop, as well as adjustment of cutting length and tolerance op to +/- 0,10 mm of the required size. Ffodpfx Aetlpl Heg Dow Specifications: • Blade diameter: 550mm • Blade drive power: 4 kW • Blade drive rpm (50hz): 2840 1/min • Total installed power: 4,3 kW • Operating pressure: 6-8 bar • Max. Feeder stroke: 500mm • Max. Clamp opening, feeder: 410mm

Condition: good (used), Centre height: 290 mm Swing diameter over bed: 580 mm Centre distance: 3000 mm Weight: 2800 kg Equipped with a ZIMMER DY 75 flat belt grinder, year of manufacture 2010, e.g. for shaft or tube grinding Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 Fsdsxtu Erjpfx Ag Defw DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1996, machine/vehicle number: 90.293/1, material width:75 mm Ffedpocxxpnofx Ag Djw total power requirement:1,5 kW dimensions of the machine ca.:1,90 x 1,15 x 1,25 m