Plate Shear - Hydraulic

FASTI TCHE 25/4

Year of construction: 1981, condition: good (used), machine/vehicle number: 3626, OFFER 21448 Technical data: - max. working width 2540 mm - max. cutting capacity St 40 4 mm - mot. cutting angle adjustment - cutting gap adjustment by scaled adjusting screws Ltodpfjhhc Ixex Aa Eja - number of hydraulic hold-downs 14 pcs. - motorized backgauge with positioning stop 10 - 1000 mm - Stroke rate depending on cutting angle and cutting length 23 per/min - hydraulic drive 400 V / 7,5 kW - table height 1030 mm - space requirement approx. W 2500 x H 1630 x D 2150 mm - weight approx. 3600 kg - with: - pneum. supported sheet metal support - front angle stop + support arms - Electronic cutting depth adjustment - cutting line illumination - E-foot switch

Condition: new, Year of construction: 2025, Thanks to its rigid structure, the drill ensures perfect drilling quality. The tilting table allows for a wide range of processing. The device is equipped with an electronic speed indicator, drilling depth indicator and a movable head. 125 mm vice included. The model is equipped with smooth regulation of spindle speed. Machine description smooth regulation of spindle speed LED lamp work table and base equipped with T-slots solid, torsion-resistant column tiltable work table from -45° to +45° drilling depth stop with scale Technical parameters Maximum drilling diameter 25 mm Maximum handle diameter 16 mm The distance of the spindle axis from the column is 215 mm MK3 spindle cone Spindle extension 150 mm Column diameter 80 mm Motor 400 V / 50 Hz / 1500 W Gearbox YES Base dimensions 580 x 415 mm Ljdpfxoridnve Aa Eota Table dimensions 356 x 356 mm Total height 1710 mm Spindle speed range (50 Hz) 180–2000 rpm Table travel range 600 mm Dimensions after packing (length/width/height) 1510 x 690 x 256 mm Weight 95 kg

Condition: good (used), Manufacturer: KOVOSVIT MAS Type: VO 50 / 1600 Year of construction: 1998 Specifications: Metric Metric US Standard Arm length 1600 mm Max. Drill Ø iron 60 mm Max. Tap diameter 42 M Quill stroke 310 mm Max. Distance spindle - table 1505 mm Min. distance spindle - table 320 mm Table / footprint 1470 x 986 mm Spindle speed 2500 rpm Tool holder 6 ISO/Bt/Mk Quill Ø 55 mm Power output 4 kW Dimensions (estimate) length 2900 mm width 1200 mm height 3200 mm weight 4700 kg Ltsdpfxjr Dr T Io Aa Eja Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: new, Year of construction: 2024, pressure: 8 bar, Miter setting horizontally 15°- 90°15° infinitely variable saw motor 5.50 KW (400 volts) saw blade 600 mm traversing range rear stop 180 mm working height 940 to 1000 mm adjustable via feet 2 x suction nozzles (above in the hood and below) net weight 600 kg WxDxH 135x140x150 cm RAL 9007 gray aluminum rotary plate polished nickel steel Saw head with recirculating ball guides designed with high accuracy and long service life and high rigidity. Sawing material can be preloaded with low pressure when the hood is open. Hydropneumatic sheet feed Chip flow towards the extraction hood. Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system Othgf • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 230 mm Hxdcvds7y • Saw blade 600mm • Saw blade not included! Our NC pusher system ensures that your machining parts are positioned at the desired machining position on our UK 600 HA 90°. A gripper clamps the material, the NC control positions the material automatically. The tension and the sawing process are then triggered. The positions are previously programmed into the program control. Once the machine tool has completed your machining, it automatically moves to the next sawing position. Depending on the processing part, several parts can also be clamped on top of each other/next to each other and positioned at the same time. Lodjgwt S Topfx Aa Eota It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: ready for operation (used), AMADA PROMECAM 3000 x 6 shears Type GPX 630 Capacity 3000 x 6 Maximum stroke 160 mm Ledpfx Aasvt Svro Ejta Rate 16 to 45 strokes/min Cutting angle from 40' to 2°20' Rear stop stroke 1000 mm Motor 15 kw Approximate weight 6500 kg Dimensions 3750x2000x1850 mm

Condition: used, Pneumatic folding and edging machine FASTI Type 606 - 11 - 1.0 Folding machine for pre-forming sheet metal seams For producing a seam bend Ltjdpfsdzqblex Aa Eea Seam bending machine for thin sheet metal as an alternative to a press brake Serial no.: 9166002 Year of manufacture: 1991 Working length: 1100 mm Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar - pneumatic foot switch - roller adjustment via threaded clamping screws Required space (L x W x H): 1600 x 300 x 1050 mm Weight: approx. 250 kg Good condition The seam is the doubling over of the sheet metal edge (1x folded over) to increase the stiffness of the sheet. By folding over, a rounded edge is created, reducing the risk of injury from sharp sheet edges. Ideal for metalworking applications such as sheet metal furniture, cladding panels, or for the production of ventilation and silencer components.

Condition: used, Year of construction: 1956, machine/vehicle number: 17179, Heavy duty lathe, lathe, lathe, center lathe and lathe, center lathe -Manufacturer: Meuser, master and feed spindle lathe type M3A -Turning length: 1400 mm -Swivel Ø over bed: 550 mm -Rotating Ø without bed: 800 mm -Rotating Ø over support: 300 mm -Spindle bore: Ø 58 mm -Spindle speeds: 15 - 810 rpm -Three-jaw chuck: Röhm Ø 250 mm -Faceplate: 500 mm -Accessories: incl. tool holder/tools see photos -Tailstock mount: MK5 -Dimensions: 2770/1070/H1310 mm Lodpeh Uuzyefx Aa Eota -Weight: kg

Condition: new, Year of construction: 2025, Fully automatic cutting of medium-large aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. For every piece of aluminium you place down to cut, no matter what length, a laser sensor measures its length. Our powerful optimisation algorithm on-the-fly calculates the best order of parts to produce minimum waste. The machine automatically cuts the calculated list without stopping. No need for any inputs from you, just keep putting in new aluminium stock. Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. Ltodpfef Ekn Isx Aa Eea • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and timber feeding rates for maximum process productivity. • Automatic optimiser mode with timber laser length measure and optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Windows and doors manufacture • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture • Aluminium retail sales Model: A550 Length: 3 m Linear Unit: ProfiStop Alpha Material Length: 1680 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: used, Year of construction: 1976, Technical details: turning diameter over bed: 340 mm turning diameter over support: 190 mm turning length: 800 mm turning length: plan =140 / quer =120 mm center height over bed: 170 mm Lsdpfsva Ertjx Aa Ejta spindle bore of work spindle: Ø 40 mm range of revolution per miute: 25 - 2000 / 20 step U/min feeds:: längs: 0,028 - 1,0 / quer: 0,012 - 0,44 mm tailstock quill taper MT: MK3 tailstock quill adjustment:: 120 mm total power requirement: 3,0 kW weight of the machine ca.: 1,1 t dimension machine xH: 2,0 x 0,8 x 1,4 m Threading possible: Metric, Withwort and modular thread Equipment: - 2-way measuring device VISUCONT - 3-jaw chuck Ø 205mm with internal clamping jaws - quick-change steel holder Multifix - foot brake - cooling water pump (exclusive supply) *

Condition: used, Year of construction: 1980, Technical data: Ltjdpfx Aetvfzcsa Eja Max. sheet width: 2500 mm Max. Sheet thickness: 8 mm Weight, approx.: 6400 kg