Thread cutting device

Fahrion GA 30 MK3

Condition: new, turning diameter 420 mm turning length 1500 mm swing diameter over bed slide 250 mm Swingdiameter in the bed bridge 590 mm centre height 210 mm Turning length in the bed bridge 260 mm reus 16 (45-1800) U/min Itsdpfx Ajk Egrpea Eer tail stock MK 4 quill stroke 120 mm diameter of quill 50 mm spindle taper DIN ISO 702-2 Nr. 6 spindle bore 52 mm spindle cone MK 6 feed längs 17 / 0,05 - 1,7 m/min feed plan 17 / 0,025 - 0,85 m/min total power requirement 4,6 kW weight of the machine ca. 1340 kg dimensions of the machine ca. 2440 x 915 x 1375 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set

Condition: new, Year of construction: 2025, For current prices and delivery times, please contact us. Dimensions and weights: Itjdpfx Aeq Ukc Rsa Esr Length (product): approx.4450mm Width/depth (product): approx.1150mm Height (product): approx.1650mm Weight (net): approx.3000kg Working ranges: Center height: 280mm Center width: 2910mm Circumferential diameter over machine bed: 560mm Circumferential diameter in the bed bridge: 790mm Swing diameter over cross slide: 355mm Turning length in the bed bridge: 170mm Bed width: 350mm Speed range: Number of speed ranges: 12 Speed range: 25 - 1600min¯¹ Electrical data: Drive motor power: 7.5kW Supply voltage: 400V Mains frequency: 50Hz Cooling lubricant system: Cooling lubricant system Coolant pump output: 125W Spindle: Spindle holder: Camlock DIN ISO 702-2 No. 8 Spindle bore/bar passage diameter: 80mm Steel holder mounting height: max.25mm Spindle cone: MK 7 Tailstock: Tailstock holder: MK 5 Tailstock quill stroke: 180mm Tailstock quill diameter: 75mm Pitch: Pitch metric: 0.2 - 14mm/rev Number of leads metric: 47 Pitch inch: 112 - 2Gg/1" Number of pitches inch: 60 Pitch Diametral Pitch: 4 - 112DPI Number of pitches Diametral Pitch: 50 Module thread pitch: 0.1 - 7mm/rev Number of module thread pitches: 34 Travel distance: Top slide travel: 130mm Travel of face slide: 316mm Bed slide travel: 2710mm Feed rate: Feed range longitudinal: 0.059 - 1.646mm/rev Number of longitudinal feeds: 35 Feed range flat: 0.020 - 0.573mm/rev Number of feeds flat: 35 Electrical connection: Total connected load: 8.5kW

Condition: used, Year of construction: 1956, bore capacity in steel (diameter) 50 mm throat 385 mm bore stroke 240 mm table surface area ø 500 mm spindle taper MT 5 spindle turning speed range 40 - 800 U/min feeds 0,1/0,14/0,2/0,28/0,4 mm/U column diameter 220 mm distance between table/spindle max. 670 mm distance spindle/base plate 1180 mm total power requirement 4 kW weight of the machine ca. 1,4 t dimensions of machine L x W x H 1,5 x 0,75 x 2,4 m Ijdpevh I U Tefx Aa Estr Accessories: drill chuck, coolant

Condition: new, TC 165 x 750V Illustration shows MIOTAL® TC 180 x 1000 Center distance: 750 mm Center height: 165 mm Swing diameter over bed: Ø 330 mm Bed width: 190 mm Cross slide travel: 160 mm Iodpfx Aaeir Igwo Ejtr Top slide travel: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm Max. Chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 1/min Mechanical feed stages: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Face feeds X: (40) 0.022 - 0.98 mm/rev Metric thread: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 Gg/inch Thread module: (32) 0.4 - 7.0 Diametral thread: (32) 7.5 - 112 Quill diameter tailstock: Ø 40 mm Inner taper of quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 650 kg Features: - Acceptance protocol according to DIN - Precise, hardened and ground guides - Robust headstock with recirculating oil lubrication, precision bearing-mounted spindle, hardened and ground gears for long-lasting quality - Electromagnetic spindle brake (TC), frequency converter with electric braking device (V models) - Torsion-resistant machine beds made of MEEHANITE quality casting, stress-free annealed and multi-ribbed for extremely smooth running - Electrical equipment from SIEMENS/SCHNEIDER - Overload protection for feed gearbox - Pulse button for main spindle - CE / IEC as well as German documentation and German service Basic equipment (standard accessories): - Machine stand with splash guard rear panel - 3-jaw lathe chuck - 4-fold steel holder - Foot pedal with mech. brake device - Coolant device - Chuck guard and spindle cover in accordance with European safety standards CE - 1 Fixed center point for main spindle - 1 Fixed center point MK3 - 1 Test report - Safety devices and electrical equipment according to CE - Reducing sleeve for main spindle Operating tool Available options for this lathe: - 3-axis digital readout - Quick-change holder system Multifix also available as a gearbox version

Condition: new, Precision control and lathe Make: OPTiturn Model: TH 4210 Item No.: 3462050 Condition: new machine Tip height: 210 mm Top width: 1,000 mm equipped as standard with: -Machine base -Quad steel holder -Light machine -Reducing bushing MK 6 / MK 4 -2 fixed centres MK 4 -Fixed bezel, 15-105 mm -Bezel running with 10-65 mm -Chuck guard, electrically protected -Coolant system -Change gears set Itsdjdbgxcepfx Aa Eor -Oil -Control tool -Manual

Condition: new, Year of construction: 2025, Fully equipped lathe with a lead screw and a feed shaft. Machine features Precise design 2 axes digital readout Large spindle bore – Ø 36 mm Heavily ribbed prism bed made of gray iron Inductively hardened and precisely ground bed guides Ensured accuracy of spindle tip better than 0.009 mm Iedporic Idsfx Aa Eotr Accuracy of lathe chuck speed better than 0.04 mm Left/right switch on the control panel With a lead screw for threading or automatic longitudinal feed Lead screw and feed shafts in two sintered bearings Automatic longitudinal and transverse feeds Lead screw and feed shaft guard Knobs by the slides with adjustable 0.04/0.02 precise scaling Included by default set of change gears for threading Emergency stop button Smooth and efficient drive of excellent spindle speed adjustment VARIO model equipped with an inverter for smooth spindle speed adjustment! Digital speed indicator By default comes with a solid steel base Technical data Swing over bed 310 mm Swing over cross slide 190 mm Centre width 900 mm Bed width 180 mm Spindle bore 38 mm Spindle tip MK5 Spindle speed 80 – 2000 rpm (adjustment in 2 ranges) Metric thread (18) 0.2 – 3.5 mm/turn Inch thread (21) 56 – 8 TPI Longitudinal feed 0.085 – 0.832 mm/turn Transverse feed 0.01 – 0.1 mm/turn Maximum upper slide travel 65 mm Maximum transverse support travel 210 mm Maximum longitudinal support travel 650 mm Tailstock spindle travel 100 mm Tailstock quill diameter 38 mm Tailstock quill taper MK3 Motor power 1.5 kW / 230V Dimensions 1520×675×1320 mm Weight 295 kg

Condition: new, Year of construction: 2025, For current prices and delivery times, please contact us. Dimensions and weights: Length (product): approx.3265mm Width/depth (product): approx.1065mm Height (product): approx.1550mm Weight (net): approx.1965kg Working ranges: Center height: 230mm Center width: 2060mm Circumferential diameter over machine bed: 460mm Circumferential diameter in the bed bridge: 690mm Swing diameter over cross slide: 270mm Turning length in the bed bridge: 240mm Bed width: 300mm Speed range: Number of speed ranges: 12 Itodpfx Aajq Ukbpo Eer Speed range: 25 - 2000min¯¹ Electrical data: Power drive motor5.5kW Supply voltage400V Mains frequency50Hz Cooling lubricant system Cooling lubricant system Coolant pump output: 125W Spindle: Spindle holder: Camlock DIN ISO 702-2 No. 6 Spindle bore/bar passage diameter: 58mm Steel holder max. mounting height: 25mm Spindle cone: MK 6 Tailstock: Tailstock holder: MK 4 Tailstock quill stroke: 130mm Tailstock quill diameter: 60mm Pitch: Pitch metric:0.1 - 14mm/rev Number of leads metric: 41 Pitch inch: 112 - 2Gg/1" Number of pitches inch:41 Pitch Diametral Pitch: 4 - 112DPI Number of pitches Diametral Pitch: 50 Module thread pitch: 0.1 - 7mm/rev Number of module thread pitches:34 Travel distance: Top slide travel: 125mm Travel of face slide: 285mm Bed slide travel: 1805mm Feed rate: Feed range longitudinal: 0.031 - 1.7mm/rev Number of longitudinal feeds: 42 Feed range flat: 0.014 - 0.784mm/rev Number of feeds flat: 42 Electrical connection: Total connected load: 5.8kW

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 9,367 h, machine/vehicle number: TRUMPF 5040 FİBER L76, laser hours: 3,715 h, laser power: 8,000 W, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 40 mm, sheet thickness aluminum (max.): 15 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 8 mm, table length: 4,000 mm, table width: 2,000 mm, table height: 800 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, feed rate X-axis: 280 m/min, feed rate Y-axis: 280 m/min, positioning speed: 280 m/min, positioning accuracy: 0.03 mm, workpiece weight (max.): 4,000 kg, power: 8 kW (10.88 HP), input voltage: 400 V, compressed air connection: 6 bar, total length: 14,000 mm, total width: 8,000 mm, total height: 2,000 mm, year of last overhaul: 2022, space requirement height: 2,000 mm, space requirement length: 14,000 mm, space requirement width: 8,000 mm, working range: 20,004,000 mm, Equipment: cooling unit, documentation/manual, safety light barrier, HIGH SPEED ECO CUTTING PACKAGE Ijdswf Ipqspfx Aa Ejtr DETECTLINE DROP&CUT INTEGRATED CAMERA FOR PROCESS IMAGING COMPRESSED AIR CUTTING PACKAGE TRUTOPS BOOST

Condition: good (used), Tool holder VDI 30 Isdpfsww Hlusx Aa Ejtr

Condition: used, tool clamping area 1 - 32 mm weight 8 - 12 kg Driven toolholders Itjdpfx Astt Eausa Esr 1: Eppinger, Mod. 6035-3: 270 Euro 2: Eppinger, Mod. 6052: 360 Euro 3: Eppinger, Mod. 6049-2: 360 Euro 4: Wendel, Mod. A 3930: 720 Euro 5: Eppinger, Mod. 10809-1-3: 720 Euro Machine dealer with own stock of 1600 m².