Component

Fagor AXD 1.15 - A1-0 Modular Drive Modul

Condition: good (used), Year of construction: 2007, travel distance X-axis: 1,060 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 635 mm, table width: 500 mm, table length: 1,200 mm, Spindle speed 10.000 Rpm Coolant tank with IKZ 20 bar Chip conveyor X - Travel: 1060mm Y - Travel: 510mm Z - Travel: 635mm Table Length: 1200mm Table Width: 500mm Kdsdpfxsxdxhro Adqjr Feed rate X-Axis: 20000mm/min. Feed rate Y-Axis: 20000mm/min. Feed rate Z-Axis: 20000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 15kW Speeds / ranges: 10000Rpm ATC / revolver: 24 Coolant through spindle / Bar:20 Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 2915mm Width: 2361mm Height: 2800mm Weight: 7000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 1998, table mounting size: 765 x 400 mm movements x/y/z: 650/410/510 mm spindle taper: BT 40 min./max. distance table/spindle: ca. 90/690 mm spindle turning speed range: 80 - 8000 rpm number of tool positions: 20 pieces carriages: ca. 30 m/min Kdedpfxstwy Dij Adqsr rapid move: ca. 30 m/min electrical connection: 380 V, ca. 15 kVA kW space needed: 2300 x 2100 x 2650 mm weight: 4000 kg

Condition: excellent (used), Year of construction: 2006, x-travel 750 mm y-travel 210 mm z-travel 1150 + 100 mm control Fanuc MSX-701III Maximum turning diameter 660 mm Max. turning length 1498 mm Diameter over cross slide max. 400 mm number of spindle speeds 3000 U/min Kdedey Spuuepfx Adqjr tool piece magazine with 40 Plätzen turret 10 Fach total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm

Condition: used, Year of construction: 2012, x-travel 2100 mm y-travel 1020 mm z-travel 762 mm Control Fanuc MXP-200FP spindle speed 6000 U/min spindle capacity ca. 22 kW max. torque on the spindle ca. 550 Nm tool taper SK 50 table surface area 2300 x 1020 mm max. table load 3000 kg T-slots 6 x 22 mm T-slot - distance 150 mm 3-Axis CNC Machining Center Equipment/Accessories: - Automatic tool changer with chain magazine, 40 stations - max. tool-Ø: 120/240 mm - max. tool length: 350 mm - coolant system with internal coolant supply and filter - emulsion mist extraction - electronic handwheel - 2 pcs. magnetic clamping plates 800 x 400 mm Kdsdpfx Adsx Sr A Ujqjr - various tool tapers SK50 - chip conveyor

Condition: excellent (used), Brand: DMTG DALIAN Model: CKE 6180 Z Cnc : FAGOR 8055 iT Turning diameter : 800 mm Turning length: 2.000 mm Center height over bed: 400 mm Face slide travel: 420 mm Longitudinal travel : 1.835 mm Spindle bore: 100 mm Spindle speeds: 40-1000 rpm Feed in X : 0-4000 m/min Feed range Z direction : 0-8000 m/ min Turret : 4 estaciones Chuck diameter 4 jaw: 400 mm Quill stroke: 260 mm Voltage : 400 v Kdodpfx Aju U Htcjdqer Total power requirement: 18,5 kw Machine dimensions : 4.500 x 2.000 x 1.800 mm

Condition: new, Year of construction: 2023, functionality: fully functional, type of input current: three-phase, travel distance X-axis: 1,200 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 610 mm, workpiece weight (max.): 1,200 kg, total height: 24,920 mm, total length: 38,970 mm, total width: 30,700 mm, table length: 1,300 mm, table width: 650 mm, spindle motor power: 11 W, rapid traverse Z-axis: 24 m/min, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, spindle nose: Iso 40, spindle speed (max.): 8,000 rpm, spindle speed (min.): 40 rpm, tool diameter: 75 mm, tool length: 250 mm, tool weight: 7 g, Equipment: documentation/manual, rotational speed infinitely variable, NEW vertical machining center "AWEA BM-1200 II" with FANUC 0i-MF Plus CNC Accessories standard: 4th axis interface Air blow system Left side auger chip conveyors Coolant through spindle ( CTS ) at 20 bar Coolant gun Kdsdpsrhi Rkofx Adqjr Fairing bottom washing system 390 liter refrigerant collection tank Automatic power-off system Alarm light & work light

Condition: excellent (used), Year of construction: 2014, operating hours: 68,000 h, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,200 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 15,000 rpm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 30 m/min, torque: 167 Nm, overall weight: 35,000 kg, Initial commissioning: December 2014 Control system: Fidia X-axis: approx. 2,200 mm Y-axis: approx. 3,500 mm Z-axis: approx. 1,200 mm A-axis: ± 100° C-axis: ± 275° Machine operating hours: approx. 68,000 h Total spindle hours: approx. 26,500 h Clamping table: 2,000 x 3,500 mm with T-slots 2-axis fork milling head Spindle power: 70 kW Spindle speed: max. 15,000 rpm Torque: max. 167 Nm Tool holder: HSK 100A Tool clamping: hydraulic Linear axis drives Feed rate X, Y, and Z axes: up to 50 m/min / 30 m/min Connection data Voltage: 400 V Frequency: 50 Hz Dimensions, weights Required space for machine without peripherals: approx. 8,000 x 6,000 x 5,000 mm Total weight: approx. 35,000 kg Kodpfjyrc Akex Adqjdr Additional equipment - Coolant system - 26-place tool changer - Work area enclosure - Chip conveyor Available at extra charge: - Wireless touch probe - BLUM laser Condition of the machine Fully operational, very good condition. Can be inspected under power.

Condition: used, Year of construction: 2006, turning diameter Ø30/300mm mm Kedpfxsugnxdj Adqsdr turning length 3055mm +/-0.3mm mm weight of the machine ca. 4-6 t

Condition: used, Year of construction: 2010, swing dia. 440 mm max. turning diameter 220 mm turning length 450 mm Kjdpfxevzcplo Adqedr travel -x axis 200 mm control FANUC 18i-TB max. helix angle 60 ° spindle bore 64 mm tool taper VDI 30 numbers of positions in the tool changer 12 CNC Lathe | COLCHESTER - TORNADO T6MS equipped with counter spindle and chip conveyor. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: T6 MS | T6-MS | T 6MS | T-6MS | T-6

Condition: new, Year of construction: 2026, CKT 320 × 750 CNC Lathe is an advanced CNC turning machine designed for precision machining of metal components in medium and large production facilities. Equipped with the Siemens Sinumerik 808D CNC control system and a hydraulic machine configuration, it delivers high productivity, reliability, and excellent machining accuracy. Key Features of the CKT 320 × 750 CNC Lathe The CKT 320 × 750 CNC metal lathe combines precision, flexibility, and durability, meeting the requirements of professional workshops and industrial production environments. As an advanced industrial CNC lathe, it enables complex machining operations such as turning, threading, grooving, and drilling while maintaining excellent component quality. Main Advantages High machining precision – maximum swing over bed of 320 mm, swing over cross slide of 90 mm (optional 135 mm), 51 mm spindle bore, and maximum bar diameter through spindle of 44 mm ensure accurate machining across a wide range of applications. Flexible spindle system – spindle speed range of 100–2500 RPM with an MT5 spindle nose allows machining of various materials, from steel to lightweight alloys. Advanced CNC control – Siemens Sinumerik 808D Advanced with Polish-language interface and Siemens servo drives improves programming efficiency and production performance. Rigid machine construction – net weight of 1040 kg (gross weight 1300 kg) and dimensions of 2370 × 1420 × 2000 mm provide excellent stability when machining workpieces up to 750 mm in length. Efficient tooling system – 4-position turret (optional 6 or 8 positions) with 16 × 16 mm tooling reduces tool change times and improves cycle efficiency. Hydraulic components – hydraulic 3-jaw chuck and hydraulic tailstock ensure fast, precise, and reliable workpiece handling. Long service life and reliability – automatic lubrication system for gears and guideways minimizes wear and extends machine lifetime. Optimized cooling system – protects tools and workpieces, ensuring stable machining conditions and high surface quality. Wide range of applications – suitable for precision turning in mechanical engineering, automotive, and tooling industries. Energy-efficient operation – 5.1 kW (S1) / 3.7 kW motor combines high performance with optimized energy consumption. Customizable configuration – optional features such as Fanuc Oi-TF control, tool probe, and CAD/CAM software integration allow adaptation to specific production requirements. Standard Equipment SIEMENS SINUMERIK 808 Advanced CNC control system with Polish-language interface Siemens servo drives Hydraulic 3-jaw chuck 4-position turret (optional 6 or 8 positions) Complete set of soft jaws Hydraulic tailstock with MT3 center Coolant system Automatic lubrication system for gears and guideways 24V halogen work lighting Technical and operating documentation CE Declaration of Conformity Technical Specifications Specification Value Swing over bed 320 mm Swing over cross slide 90 mm (optional 135 mm) Distance between centers 750 mm Kjdpfx Adoi Apg Uoqodr Spindle speed range 100–2500 RPM Spindle bore 51 mm Spindle taper MT5 Number of tools 6 Tool size 16 × 16 mm Maximum bar diameter through spindle 44 mm Tailstock taper MT3 Maximum tailstock travel 100 mm Main motor power 5.1 kW (S1) / 3.7 kW Machine dimensions (L × W × H) 2370 × 1420 × 2000 mm Net / gross weight 1040 / 1300 kg