Electric motor 0.25 kW 890 Rpm

Electro Adda FC71FE-6

Condition: ready for operation (used), Electro Adda FC71FE-8/2 3~ motor with Bonifiglioli MVF 49/F angular gear (i=14) , serial no. according to photo , hole spacing of mounting holes: 63 x 63 mm, Ø drive shaft: 14 mm ,used, small traces of use, 100% functional Kdelhccoi D Hrujqnok

Condition: ready for operation (used), Electro Adda FC71FE-8/2 3~ motor with Bonifiglioli VF44 F1 P71B5 right angle gearbox (i=14) , serial no. according to photo , hole spacing of mounting holes: 62 x 62 resp. 46 x 46 mm, Ø hole for drive shaft: 18 mm ,used, small traces of use, 100% functional Kdelhji D Hr Ajccqnsk

Condition: good (used), three-phase motor, electric motor -Manufacturer: ADDA, electric motor type C160L-8/6 Kdolhccqev Inflenjk -Power: 3.5 kW -Speed: 720 rpm -Shaft: Ø 42 x 110 mm -Design: B3 -Protection class: IP 55 -Number: 3x Motor available -Price: per piece -Dimensions: 635/320/H410 mm -Weight: 87 kg/piece

Condition: excellent (used), Year of construction: 1996, FREQUENCY CONVERTER KVA 60 - VOLT 380/660 - 50/100 HZ - RPM 1450 - 6000 GOOD CONDITION Frequency converter, frequency inverter, drive converter, controller, variable speed drive -Input: 380 V 50 Hz -Output: 380 V 100 Hz -Power: 60 KVA Kdjlhewcqxcoccqnsk -

Condition: ready for operation (used), Electro Adda FC80FECC-2 3~ motor with SCM gearbox (i=3.9:1) , serial no. according to photo , hole spacing of mounting holes: 140 mm, Ø hole for output shaft: 12 mm hexagonal ,used, normal signs of wear, 100% functional Kdslhoi D Hr Hoccqnsk

Condition: ready for operation (used), Electro Adda FC80FECC-2 3~ motor with SCM gearbox (i=3.9:1) , serial no. according to photo , hole spacing of mounting holes: 140 mm, Ø hole for output shaft: 12 mm hexagonal ,used, normal signs of wear, 100% functional Kolhccoi D Hr Uoqnjdk

Condition: ready for operation (used), Electro Adda CF C1 80MT frequency converter , serial no. according to photo ,used, normal signs of use, 100% functional ATTENTION: Please ask for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Kdslsi D Hrqjhccqnjk

Condition: ready for operation (used), Electro Adda FC80FECC-2 3~ motor with SCM gearbox (i=3.9:1) , serial no. according to photo , hole spacing of mounting holes: 140 mm, Ø hole for output shaft: 12 mm hexagonal ,used, normal signs of wear, 100% functional Kdslhccoi D Hr Roqnsk

Condition: ready for operation (used), Electro Adda FV71FE-8/2 3~ motor with Bonifiglioli angular gear MVF 49/P (i=7) , serial no. according to photo , hole spacing of mounting holes: 63 x 63 mm, Ø drive shaft: 30 mm ,used, normal signs of wear, 100% functional Kdjlhcoi D Htcjcqnek

Condition: excellent (used), Electrohydraulic lifting device, linear drive, linear gear, lifting gear, spindle drive, electrohydraulic actuator for valves, valve drive, actuator, servomotor, actuating cylinder for rotor brake, disc brake, electrohydraulic disc brake, crane brake, electrohydraulic lifting device, lifting drive -Manufacturer: EMG Eldro Electro-hydraulic lifting device unused -Type: Eldro Ed 80/6 -Item no.: 1045 2806 lifting drive Eldro Ed 80/6 stroke: 60 mm -Shaft: Ø 20 mm -Number: 6x lifting drive available -Price: per piece -Dimensions: 490/190/H255 mm -Total weight: 22 kg/piece Kslhccqsv Hxw Aenjdk

Condition: like new (used), Year of construction: 2011, Operating temperature: max. 150°C. Interior dimensions: WxDxH: 1395x2030x1115 mm. External dimensions, incl. superstructure: approx. 1970x2300x1860 mm. Kjlsvntzfshccqnodk Interior accessible from two sides via hinged doors. Connected loads: 3~400V/50H/15.55 kW. The unit is unused!

Year of construction: 2024, Condition: used, New: Yes Make of engine: CAT Serial number: 2 Kolhcota Rrkocqnsdk Transport dimensions (LxWxH): 0,27x0,19x0,03 Production country: HU Please contact Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information

Condition: new, Hardfacing electrode Make Duramit W4 material 1.2567 diameter 6 mm Kdslhccqehhyitonek length 450 mm 40 pieces in a package 6 packages available 95 Euro per package

Condition: excellent (used), Catalog number 7262 TECHNICAL DATA - top loading hopper inlet 780x620mm - bottom loading hopper inlet 650x620mm - outlet for shredded wood fi 160mm - rotor working width 600mm - rotor diameter 248mm - main engine 18.5kW - pump engine 0.75kW - number of knives 30pcs - knife dimensions 30x30mm - sieve 20x20mm - pressure drawer - electric auto reverse - dimensions l/w/h 1750x1200x1650mm - weight 1200kg ADVANTAGES Kdolhccqjrm Ii Denek - German production - original DTR documentation - unpainted - auto reverse - pressure drawer - very good condition - chipper used Original photos Net price: PLN 48,900 Net price: EUR 11,500 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: good (used), Year of construction: 2008, laser power: 6,000 W, TruLaser 5060 Year 2008 - 6 KW resonator Kdelhccovluxmeqnok

Condition: good (used), Functionality: fully functional, Juki Corporation Electro Design GIMO transport module, MB 702 Model: MB702 Year of manufacture: 2016 Electrical data: Kolhccqeucd Utonedk Rated voltage: 100/240V AC Frequency: 50-60Hz

Condition: refurbished (used), Year of construction: 2012, Have 2 Special Folders Completely Rebuilt with New Rollers & New Gears. Anybody interested please feel free to reach out. 1. H&H Folder with the following Details: 8 Plates + 6Plates - Gremser Flatpile Feeder (Year:2012) - Mobile Feeder with height adjustment, 50X70. - First Unit: H&H M7.32 52/8. Working width: 52 (Year:1999) -Second Unit: H&H KL 112 45/6 -Hanging Stacker Kdelhccjwcln Eeqnok 2. H&H Folder with the following Details: 10 Plates + 6Plates - Gremser Flatpile Feeder (Year:2001) - Mobile Feeder with height adjustment, 50X70. - First Unit: H&H KL 112 45/10. Working width: 45 -Second Unit: H&H KL 112 35/6 -Pratham Stacker with Height Adjustments EXTRAS: 1. Extended Delivery 2. Two Cutting Units for 2-3 Up Production. (3 pairs of slitter shafts) (Year:1999) (Working Width: 42cm) VERY SPECIAL FOLDERS FOR A VERY SPECIAL PRICE

Condition: good (used), Functionality: fully functional, load capacity: 6,000 kg, table load: 6,000 kg, Welding turntable with a 6-ton load capacity with hand and dual-foot remote controls In perfect condition, with no defects, extremely robust, indestructible, and simple technology for easy maintenance. Speed continuously adjustable from 0.02 to 1.0 rpm Tilt angle 135° and speed display with dual-foot remote control and additional hand-held remote control Diameter of the clamping plate: 1650 mm Height tilted to the center of the plate: 1450 mm Kdslhowam Iheccqnjk Height horizontal: 1650 mm Length: 2200 mm Width: 1200 mm The machine can be lowered by 200 mm upon request (by removing the lower rail).

Condition: excellent (used), three-phase motor, electric motor -Manufacturer: ADDA, electric motor type 100LB-4 -Power: 3 kW -Speed: 1400 rpm Kjlhccev Umkmjqnedk -Shaft: Ø 28 x 60 mm -Design: B3/B14 -Protection class: IP 55 -Dimensions: 360/200/H250 mm -Weight: 22.6 kg

Condition: used, CATALOG NUMBER 7593 Technical data: Kdolhccov R Epteqnjk - thickness of processed elements 8-45mm - minimum length of processed element 100mm - minimum width of processed element 100mm - edge thickness 0.4-3.0mm - feed speed 9.5m/min - cutting unit – engine power 2×0.22kW - milling unit 2×0.35kW - milling unit 12000rpm - corner finishing unit – minimum length of processed elements 250mm - corner finishing unit 1×0.35kW - corner finishing unit 12000rpm - pre-milling unit 1×1.1;1×0.75kW - pre-milling unit 12000rpm - polishing unit – engine power 2×0.18kW - polishing unit 2800rpm - diameters of exhaust ports 2x120mm, 2x100mm - compressed air pressure 6.5bar - total power 6.7kW - dimensions length/width/height 4190/1050/1470mm - weight 1180kg ADVANTAGES - corner finishing - pre-milling - DTR documentation - machine used - perfect condition Net price: PLN 56900 Net price: EUR 13380 depending on the price EUR 4.25 (Prices may change with higher fluctuations)

Year of construction: 2011, Condition: refurbished (used), Currently undergoing general overhaul, delivery time on request, -max. temperature 250 °C Kdelhcsttbf Uocqnsk -total steam space 20.5 m³ -usable dimensions (LxWxH) 2300 x 2750 x 2200 mm -control Jumo Imago 500 -heating output 72 KW -minimum exhaust air volume flow at 20°C: 140 m³/h -max. load of the kiln car 6000 kg -electrical supply and exhaust air flaps Belimo -exhaust air fan controlled via frequency converter -installation dimensions (LxWxH) 3000 x 3000 x 3125 mm -own weight approx. 3500 kg -free-standing control cabinet -documentation Visit to our warehouse by arrangement. furnace, furnaces, industrial furnace, convection furnace, chamber convection furnace, tempering furnace, heating furnace, drying furnace, tempering furnace

Condition: like new (used), Year of construction: 2015, Used Bottling Line | Used Beverage Line | Soft Drinks NP 591 | PET Bottling Line Kslhcotr Hblocqnjdk Year: 2015 Speed: 3,000 Bph Product type: Natural water Processable formats: 6 LT Composed of: STM BLOW MOLDING MACHINE Model: BLU LINE 3 Number of cavities: 3 Preform Elevator/Orientator HP booster 10 to 30 Bar LP compressor 10 Bar Chiller Available sizes: 6 L (1 mold available) STM TRIBLOCK Model: ARROW 16/16/6 NC/BIG 16-plier rinser 16-valve filling machine Filling type: gravity Fluid speed control with variable speed 6-head capper - magnetic heads Cap type: prethreaded plastic Cap size: 48 mm BERICAP Automatic cap feeder CIP sanitization 2015 Filtration system with HEPA filters 6L format included UNO ADE LABELING MACHINE (2016) Direction of travel: linear Label type: adhesive Application type: wrap-around Ersey Makina Handle Feeder for BOWLS Automatic handle feeder Ersey Makina Palletizer Pitching system Pallet magazine Ersey Makina Pallet Winder Year: 2015 Type: rotary arm Maximum workable format: Ø 175 mm Air conveyor belts for transporting empty bottles Bottle conveyor belts Pallet conveyor belts Safety guards

Condition: good (used), Year of construction: 1998, The device in constant use. I have 4 pieces for sale. Kjlhcsuh Td Iecqnedk

Condition: new, Year of construction: 2025, machine/vehicle number: EAN0729389556525, total length: 82,200 mm, shelf height: 5,000 mm, support length: 3,300 mm, shelf length: 13,700 mm, frame height: 5,000 mm, load per truss pair (max.): 3,250 kg, frame width: 1,100 mm, number of shelf rows: 6, 2 single-row pallet racks + 2 double-row pallet racks (8 x M50113313-4) each 13.7 m long, 5 m high, 1.1 m deep, each with 4 bays, 3.3 m wide, each with 3 beam levels, shelf load 3250 kg. - 30 frames (RM5011 - RAL5019) - 80 base plates, shims, and screws - 30 spacers/connectors for double rows (ZAbh20) - 120 ground anchors (ZZBA1210) - 144 single crossbeams (T27114 - RAL2008) - 0 collision protection/ram protection (ZRS40901) - 6 load plates (BSMcP) Frames bolted, not pre-assembled Kdsljv Uq Dkjhccqnsk Freight/Delivery: - max. 20 working days after receipt of payment - ex works site/installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: excellent (used), CATALOGUE NUMBER 7172 TECHNICAL DATA - shaft width 640mm - max. thickness of the processed element 230mm - 4-knife shaft from above: - pawls - toothed input shaft, pulling - pressure - planing shaft - pressure - smooth output shaft, pulling, metal - from below 2 sliding rollers adjustable in the top - 5.5kW motor - electric lifting of the top approx. 0.25kW - 2 types of feed speed 0.75kW - diameter of the extraction nozzle 160mm - dimensions length/width/height 1320x1270x1380mm - weight 903kg Kdjlhccqjp T Sx Tsnek ADVANTAGES - German production - used thicknesser, very good condition Net price: 21900 PLN Net price: 5140 EUR Net price calculated according to the exchange rate of 4.25 PLN/EUR (in case of larger exchange rate fluctuations the price may change)