Surface grinding machine

ELB-Schliff SW4

Condition: good (used), Year of construction: 1985, functionality: fully functional, The ELB SW 4/2 is a classic conventional surface grinding machine. Specific data may vary depending on the version (e.g., VA I, VAI-Z), but the key technical specifications typically fall within the following range: Machine type: Surface grinding machine (horizontal) Dujdpfeyy Aczjx Ag Djr Working area Grinding length: approx. 450 mm Grinding width: approx. 250 mm Max. workpiece height: approx. 280 mm Grinding spindle Grinding wheel: Ø 250 mm × 25 mm width Bore: 51 mm Speed: approx. 1,430 / 2,900 rpm Spindle motor: approx. 2.5 kW (total power ~4.5 kW) Axis travels Vertical travel (Z): approx. 400 mm General data Total power: approx. 4.5 kW Machine weight: approx. 1,800 kg Dimensions (L×W×H): approx. 1,800 × 1,400 × 2,000 mm

Condition: excellent (used), Year of construction: 2004, operating hours: 7,987 h, functionality: fully functional, travel distance X-axis: 1,120 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 36 m/min, controller manufacturer: FANUC, controller model: 160 is-MB, table width: 500 mm, table length: 500 mm, table load: 400 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 7,979 h, spindle motor power: 22,000 W, spindle nose: SK 40, number of slots in tool magazine: 30, input voltage: 380 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Japanese-built high-speed machining center with full 5-axis simultaneous capability, in excellent condition with 29,000 power-on hours and only 7,900 spindle hours (as the spindle was overhauled by the manufacturer a few years ago), complete with: remote electronic handwheel; high-pressure through-spindle coolant; chip conveyor; random tool changer; laser tool inspection system; RENISHAW MP 10 wireless part probe; FANUC high-speed package; network interface; serial interface; memory card. Duodpfx Agox H Tx Hs Dsr

Condition: ready for operation (used), Year of construction: 1971, functionality: fully functional, grinding length: 400 mm, grinding width: 250 mm, grinding height: 275 mm, grinding wheel diameter: 250 mm, grinding wheel width: 30 mm, ELB - Surface grinding machine, Model: SW 4 VA I, year of manufacture: 1971, grinding area: 450 x 250 x 275 mm, grinding wheel: 250 x 30 x 51 mm Djdpfx Ageyzfals Dour ACCESSORIES: Coolant tank with pump, electro-magnetic chuck 450 x 250 mm, leveling feet

Condition: excellent (used), Year of construction: 2017, operating hours: 5,000 h, functionality: fully functional, Controller HAAS Table size D500 mm Table load 300 kgs X travel 762 mm Y travel 508 mm Z travel 508 mm B swivel +120 - 35 degree C rotation 0,001 - 360 degree Distance between spindle end and table surface 102 - 610 mm Max. spindle speed 8100 rpm Max torque 122.0 Nm at 2000 rpm Spindle power 22,4 kW Spindle drive system Inline Direct-Drive Tool holder SK40 ATC magazin 30+1-fold Max. tool dia (next to each other) D64 mm Max. tool dia (neighboard places empty) D127 mm Max. tool length 305 mm Max. tool weight 5.4 kgs Weight 6500 kgs Dimensions LxWxH = 4420 x 2340 x 2540 mm Features, accessories - Coolant unit - High pressure pump (CTS) - Chip conveyor - RENISHAW tool presetter - RENISHAW zero point presetter - Manuals Dujdpfx Agsxva Ahj Der The machine is still in production in Hungary and can be inspected in operation. It was purchsed as new. Ready to buy immediately.

Condition: good (used), functionality: fully functional, machine/vehicle number: 804, roller length: 2,550 mm, working width: 2,500 mm, sheet thickness (max.): 16 mm, sheet thickness steel (max.): 16 mm, overall weight: 12,500 kg, 3-roll hydraulic plate bending machine 2500 x 16 mm Manufacturer: KUMLA Type: PV 7 H Serial no.: 804, overhauled in 1987 The machine is of a very robust design and has only been used in single-shift operation. Max. bending length: 2500 mm Max. sheet thickness: 16 mm Cone bending device Top roll diameter: 324 mm Bottom roll diameter: 305 mm Hydraulic roll adjustment Dodpfxevxbm Rj Ag Dsur Dimensions: L x W x H = 5000 x 1600 x H 1900 mm Working height: 1000 mm Additionally, a staircase platform around the machine can be purchased.

Condition: new, Year of construction: 2023, functionality: fully functional, type of input current: three-phase, travel distance X-axis: 1,500 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 610 mm, workpiece weight (max.): 1,500 kg, total height: 24,920 mm, total length: 43,670 mm, total width: 30,700 mm, table length: 1,600 mm, table width: 700 mm, spindle motor power: 11 W, rapid traverse Z-axis: 24 m/min, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, spindle nose: Iso 40, spindle speed (max.): 8,000 rpm, spindle speed (min.): 40 rpm, tool diameter: 75 mm, tool length: 250 mm, Equipment: documentation/manual, rotational speed infinitely variable, NEW vertical machining center "AWEA BM-1500 II" with FANUC 0i-MF Plus CNC Accessories present: 4th axis interface Air blow system Dusdpfxsrkn Iio Ag Der Left side auger chip conveyors Coolant through spindle ( CTS ) at 20 bar Coolant gun Fairing bottom washing system 500 liter refrigerant collection tank Automatic power-off system Alarm light & work light

Condition: good (used), Year of construction: 2009, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 36,000 m/min, table width: 510 mm, table length: 1,460 mm, table load: 800 kg, Renishaw measuring probe MP-12 IKZ 15 Bar Interface set Performabnce software package Monitoring B prepared not included X - Travel: 1120mm Y - Travel: 510mm Z - Travel: 510mm Table Length: 1460mm Table Width: 510mm Table load: 800 Feed rate X-Axis: 36000mm/min. Feed rate Y-Axis: 36000mm/min. Feed rate Z-Axis: 36000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 18.5kW Dusdpfx Agow Rm Die Dor Speeds / ranges: 12000Rpm ATC / revolver: 30 Coolant through spindle / Bar:Yes Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 3300mm Width: 2850mm Height: 2800mm Weight: 6100kg

Condition: good (used), Year of construction: 2008, Table size 1600 x 750 mm, table load 1500 kgs, Traverses XYZ 1525 x 762 x 625 mm, Duedpfx Agsxwytcs Der rapid feedrates 24m/min, Spindle power 18.5 Kw, spindle speed 6,000rpm, 40 station ATC, spindle taper BT50, through spindle coolant, swarf conveyor, Fanuc 21i control.

Condition: good (used), Year of construction: 2003, X 1740mm, Y 766mm, Z 660mm 10000 rpm Dsdpfx Agjwyblzs Dsur Parts shown by hand not come.

Condition: good (used), Year of construction: 2007, functionality: fully functional, 1 JOBS LINX DESIGN gantry milling machine from 2007 CNC FIDIA C20 – Siemens linear motors – feed rate 50 m/min X 7200 Y 3200 Z 2000 TABLE 6000 X 2500 AUTOMATIC HEAD AXIS A-C A 200° (+- 100°) B 400° (+- 200°) SPINDLE SPEED 24,000 RPM HSK 63 – 27kW – cooling system Dedjxtp Hwepfx Ag Deur ATC 20 tools WEIGHT 52T