Surface grinding machine

ELB-Schliff smartLine BD15 KXT XC

Condition: excellent (used), functionality: fully functional, turning diameter over cross slide: 390 mm, spindle bore: 116 mm, turning diameter: 635 mm, turning diameter over bed slide: 390 mm, turning length: 2,000 mm, Used lathe in very good condition, including a 400 mm 3-jaw chuck, 1 x steady rest and a Multifix toolholder. Technical specifications: Turning length: 2000 mm Swing over bed: 630 mm Ihedpfex Eln Rox Afnou Swing over cross slide: 390 mm Swing in gap: 900 mm Spindle bore diameter: 116 mm Total weight: 4230 kg Chuck mounting: D1 11 in. Camlock Morse taper: No. 6

Condition: excellent (used), Year of construction: 2013, Alpha 1550XS - Cycle lathe incl. accessories Iedpsunruyefx Afnehu Center distance is 1500 not 2000 Multifix holder 16 pieces Year of construction 2013 Top condition (really in top condition) Various interchangeable jaws (soft jaws) steady rest face plate Spindle bore 104mm Turning over bed 550mm Three-jaw chuck 315mm

Condition: excellent (used), Year of construction: 2009, - Digital display. - Accessories available. Tips Height 170 mm Tip width 650 mm turning diameter over the bed 350 mm over the cross slide 196 mm in the offset 535 mm Width in front of the front plate 165 mm Spindle Spindle bore 42 mm Spindle nose D1-4" Camlock Morse taper in bushing no. 3 MT Spindle speeds 3 speed ranges 0 - 3250 rpm Main motor 7.5 kW (10 HP) Bed Slide guide width 318 mm Guide type V-shaped and flat Cross slide Width and length 180 - 850 mm Travel 250 mm Top slide Width 90 mm Travel 130 mm Tool holder 20 x 20 mm Quick-action tool lock Dickson No. 2 Tailstock Diameter of quill (nominal value) 63 mm Travel 145 mm Morse taper no. 4 M.T. Offset ±12 mm Lead screw Diameter 32 mm Thread 6 mm pitch or 4 T.P.I. Thread Metric Pitch 0.2 - 14 mm (51) Inch thread T.P.I. 2 -56 (56) Module thread pitches 0.2 - 3.5 (20) Diametrical pitch (D.P.) 8 - 56 (20) Feed rate Metric (R10 series) 0.018 - 1.2 mm/rev Inch (R10 series) 0.0007 - 0.048"/rev Face feed = approx. half of the longitudinal values Machine height Floor to spindle center 1070 mm Total length 1250 mm Machine 2500 mm Total width 1100 mm Height over all 1300 mm Cooling pump Type AQ 3MG Headstock oil pump Type Interlube three-phase 27662-131 Ihedpfx Afjtr Ud Sjneu Weight 1250 mm between tips approx. 1450 kg

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 1, grinding length: 1,000 mm, grinding width: 600 mm, Geibel & Hotz FS 1050 SD horizontal surface grinder Grinding area 1000 x 600 mm Fine pole pitch of the magnetic plate Many flanges and discs Large paper belt filter Adjustable feet Blade and circuit diagram Balancing scale Machine was in use a maximum of 2 days a week - Not a standard machine Pricing: ex-works - unpacked - uninsured Delivery time: immediately - subject to prior sale Errors excepted - technical data is non-binding Iedjv U Dfuopfx Afnehu

Condition: used, Year of construction: 2003, machine/vehicle number: 1527, Used lead and feed screw lathe COLCHESTER Triumph VS 2500 Ihjdpfxex Hrumj Afnsu Centre height: 195mm Distance between centers: 650mm Spindle bore: 54mm Infinitely variable speed: 14–2500 rpm Tailstock quill: MT5, coolant system, quick thread cutting device Digital readout: FAGOR NUP 300 TS-RS 1 x RÖHM 3-jaw chuck, 5-position stop drum, spindle stop, machine lamp, 1 x PARAT 4-way turret, 4 x PARAT tool holders, live centre and quick-action drill chuck. The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. Inspection of the machine is possible by appointment.

Condition: used, CNC cycle controlled lathe HARRISON type Alpha 400 Plus Machine No. P30180/150 Year of construction 1998 center distance 1250 mm turning diameter over bed 400 mm center height 200 mm Swing diameter over cross slide 245 mm Swing diameter in the bend 585 mm bed width 313 mm face travel (X-axis) 250 mm Tailstock spindle diameter 73 mm Tailstock quill stroke 140 mm Tailstock quill mount MK 5 spindle bore 54 mm spindle head size Camlock D1 size 6 Spindle speed 20-2500 rpm. Spindle speed range (stage 1) 15-275 rpm. Spindle speed range (stage 2) 35-795 rpm. Spindle speed range (level 3) 110-2500 rpm. Feed rate X and Z 0.03 - 0.6 mm/rev. Rapid traverse speed X axis max. 2000 mm/min. Rapid traverse speed Z-axis max. 4000 mm/min. Threading function Metric / Inch / Diametral / Module Spindle drive power 7.5 KW Mains connection 400 Volt, 50 Hz, 23,5 kVA - cycle control Harrison Alpha / GE FANUC - language in French (France) - automatic gear range shifting in 3 steps (15-275, 35-795, 110-2500 rpm.) - electronic handwheels with different transmission ratios (1/10/100) Ihedpfx Afeh Hvk Asneu - 3-jaw face spiral lathe chuck FORKARDT Ø 250 mm type CSN, 1 set of soft top jaws - quick-change tool holder MULTIFIX size B with 2 inserts - 1 piece of centering point running with the tool - 1 piece quick-action drill chuck RÖHM, 3-16 mm - hinged lathe chuck guard - hinged working area protection doors - chip tray with coolant device under the machine bed - Switch cabinet fixed to the machine - Interface RS 232 Space requirement L x W x H 2600 x 1450 x 1550 mm weight 1950 kg good condition

Condition: good (used), Year of construction: 2004, Swing over bed Ø 320 mm Swing over cross slide Ø 150 mm DBC Turning Length 750 mm Spindle bore 52 mm Spindle power 16 kW Ihjdpewu Dq Aofx Afnou Tailstock spindle Ø 60 Ø Stroke pinole 140 mm Spindle taper 4 Mk Speeds / ranges 3000 Rpm Feed rate X-Axis 1000 mm/min. Feed rate Z-Axis 2000 mm/min.

Condition: ready for operation (used), functionality: fully functional, spindle bore: 42 mm, center height: 165 mm, center width: 635 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 30 rpm, overall weight: 900 kg, Ladies and Gentlemen, We are selling a Colchester Master 2500 lathe with Heidenhain digital readout. The machine is fully functional and can be tested on site. Availability: immediately Center width: 635 mm Center height above bed: 165 mm Center height above support: 105 mm Spindle bore: 42 mm Spindle speed: 30 - 2500 rpm. 16 steps Ihodpfeu St S Ajx Afnju Inner tailstock taper: MK 3 Drive power: 3.7 kW Space requirement: (LxWxH) 1700 x 880 x 1200 mm Weight: approx. 850 kg

Condition: used, Year of construction: 1994, turning diameter 570 mm turning length 2000 mm control Sinumerik 805 Siemens swing diameter over face slide 365 mm main spindle speeds: 3-2.500 U/min drive of main spindle 15/19 kW spindle bore 62 mm spindle head DIN 55027 No.8 tailstock taper MT 5 Isdpfxou Sbkgj Afnehu quill stroke 190 mm pinole diameter 80 mm feed range - long. and cross 0,01-50 mm/u total power requirement 50 KVA weight of the machine ca. 5 t dimensions of the machine ca. m

Condition: ready for operation (used), Year of construction: 2015, operating hours: 5,000 h, spindle speed (max.): 2,500 rpm, overall weight: 1,800 kg, This Colchester Triumph VS 2500 was manufactured in 2015. It features a conventional pull and lead screw, infinitely variable speed adjustment, and a digital display. Key specifications include a turning diameter of 400mm, center height of 195mm, and a bed width of 1270mm. It also comes equipped with a MultiFix quick-change tool holder, maximum spindle speed of 2500rpm, and a motor power of 7.5kW. Weight is 1,800kg. Contact us for more information about this machine. • Control: Conventional with lead screw and infinitely variable speed adjustment Ihjdpfx Afsx D Nwdoneu • Readouts: Digital display for axes and digital spindle speed display • Operating hours: No counter; estimated 5,000–7,000 h • Turning diameter: 400 mm • Center height: 195 mm • Bed width: 1270 mm • Toolpost: MultiFix quick-change tool holder Additional equipment • 3x three-jaw chucks • 3 sets of claw jaws • Chuck wrench • Manual/operating instructions • Work area lamp • Digital dial indicator • 4 MultiFix tool holders • Various turning tools • Drill chuck (keyless) for tailstock • Coolant pump