Hydraulic plate shears

EHT TSS 3-40

Condition: used, mileage: 129,252 km, lifting height: 38,000 mm, Year of construction: 2015, Drivetrain Drive: Wheel Weights Empty weight: 27.875 kg Functional Lifting capacity: 23.800 kg Identification Serial number: 122024 Other information Lhedpjw A Hcdofx Aa Eor Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: Bridgestone Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 11.1x2.55x3.9 Additional information Please contact PFEIFER GROUP for more information

Condition: new, Year of construction: 2025, total width: 1,000 mm, total length: 1,600 mm, total height: 950 mm, power: 1.5 kW (2.04 HP), Roof panel roll forming machine F3-27 with clip relief LLC “Evolutioner” designed roof panel roll forming machine F3-27 with clip relief for metal roof production of double standing seam profile. Standing seam roof is widely used in the manufacturing of various buildings and structures, in the reconstruction of ancient houses and architectural objects. Standing seam gives a beautiful appearance to the roof, pointing its uniqueness and aesthetic design. In modern construction, standing seam panels often decorate the facades of walls of various buildings. The roofing machine F3-27 allows you to roll metal roof panels of various lengths, the rolling length is unlimited. The machine is quite lightweight, which makes it possible to use it directly at the roof installation place and forming panels directly on site. Thus, there is no need to transport finished roof panels from the workshop to the roof installation place, avoiding their possible damage and saving money on transportation services. Technical details: Rolling length – unlimited; Forming steps: 7; Lock high (mm): 27 Metal roof panel machine F3-27 is equipped with width easy adjustable system, so to adjust the width of the panel you just need to turn the special wheel. As extra options with F3-27 roll forming machine you can get: Lhodpjp Stgnjfx Aa Ejr - cross cutting knife; - length measuring device; - ribbed panel rolls; - radius panel rolls; - standing seam hand seamers; - electric seaming machine ESM-1; - sliding clip formers; - fixed clip formers; - floor decoiler; - ribbed panel forming machine RPFM; - automatic shear with automatic system; Portable roof panel machine F3-27 has six pairs of forming rolls to make a profile height of 27 mm and an additional stand for rolling clip relief. A relief clip is a special bend on the panel to hide sliding or fixed clips under it. Those clips are used to connect roof panel to the roof frame. In addition, we produce following metal roof panel machines: standing seam metal roof machine F3; roof panel machine F3-9 with clip relief; snap lock roof panel roll forming machine SL-1; automatic snap lock roof panel machine SL-1 auto;

Condition: excellent (used), EHT Guillotine Shears Brand: Eisen u. Hammerwerk (EHT) Lhsdpfxswc Rgas Aa Eer Type: ASS 8-30 Year of manufacture: 1967 Serial number: 10625 Cutting length: 3000 mm Max. sheet thickness: 8 mm Motor power: 11 kW Connection: 380 V Dimensions: 3950 x 3100 x 1900 mm

Condition: used, Year of construction: 2001, sheet width 3200 mm plate thickness 3.0 mm ST thickness at "Niro-steel" 2.0 mm Opening width / upper beam 300 mm speed OW 40.0 mm/sec Bending beam adjustment 80.0 mm speed BW 90.0 Grad/sec work height max. 900 mm control MULTIBEND 5000 back stop - adjustable 10 - 1550 mm accuracy +/- 0.1 mm air pressure 5.0 bar Number of working hours ca. 1.000 h Lodpfx Aoxabz Tea Eohr total power requirement 2x 4.0 kW voltage 400 V weight 4400 kg range L-W-H 4295 x 2225 x 1775 mm New price approx. 85.000 euros Machine with only approx. 1.000 operating hours (!!) good condition (!!) Special price on request - in checked condition - machine video - ?v=VP6emx4HTYM ! Maximum flexibility when bending cassettes, boxes and profiles ! High flexibility in bending part design ! High productivity and throughput ! Easy to use Equipment: - motorized universal swivel bending machine "RAS 73.30" * high-precision mechanics with modern control technology * for individual and series production * robust high-speed machine with high axis speeds * torsion-free welded construction - RAS CNC control model "MULTIBEND 5000" * material and tool library * swiveling - front right * 1x emergency stop button - CNC electro-motorized upper beam adjustment * fast closing and opening speed * programmable opening and closing height * bending radii without special tools (multiple bends) * rigid upper beam for straight bending parts * 1x set of RAS split upper tools .. height 80 mm * RAS "click-in" tool system - CNC electro-motorized bending beam adjustment * fast swivel movement: short production time * crowning system compensates for deformation by the bending forces * 1x set of RAS split bending tools - CNC electro-motoric back stop * fast positioning, repeatable work * table plates hold the weight of the sheet * stainless steel table plates with ball rollers - 2x freely movable double foot switch - 1x RAS tool trolley for bending tools (movable) - operating instructions (PDF) + original circuit diagram

Condition: used, Year of construction: 1999, sheet width 3000 mm Ledpfx Aer Ngtisa Eshr plate thickness 3 mm 3 support arms 1 angle stop pneumatic hold-down device Backgauge to be operated by hand

Condition: used, Year of construction: 1978, sheet width 3100 mm plate thickness 2 mm rear stop 1000 mm cutting angle 1°06 ° no. of strokes 45 Hub/min total power requirement 3,0 kW dimensions of the machine ca. 3600 x 2200 x 1600 mm weight 4500 kg Lhjdpfx Aajuagxps Esr Equipment: - Electric motorized backgauge - With digital ELGO position display - Manual cutting gap adjustment - 1x side stop with mm scale - 2x support arms - 1x freely movable double foot switch - Front finger guard Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: good (used), Used hydraulic shear brand SCHIAVI, mod. GH540A Useful cutting length mm 4040 Cutting thickness 5 mm Motorized rear register stroke mm 1000 Lateral recess 500 mm Min strokes 20-55 Cutting angle variation 0° 29" - 1° 14" Manual blade gap adjustment Three-phase current 380V Main motor power Kw 9 Lhedpfxeqfc Ime Aa Eor Overall dimensions mm L 4570 mm x l 2310 mm x h 1705 mm Approximate weight Kg 11000 Good condition viewable

Condition: excellent (used), mileage: 669,712 km, power: 375 kW (509.86 HP), first registration: 12/2013, fuel type: diesel, axle configuration: 8x2, wheelbase: 5,670 mm, fuel: diesel, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, total length: 8,350 mm, total width: 2,500 mm, Year of construction: 2013, Equipment: AdBlue, air conditioning, airbag, electric window regulation, fridge, = Additional Options and Equipment = - Enclosed cab - Air suspension - Sun visor - Power take-off (PTO) - Power take-off (PTO) = Additional Information = Ledpfx Aew Nqt Sja Eohr Technical Information Number of cylinders: 6 Engine displacement: 12,777 cc Transmission Gearbox: I-Shift, automatic Axle configuration Front axle: Max. axle load: 9,000 kg; Steering; Tire tread left: 50%; Tire tread right: 50% Rear axle 1: Max. axle load: 9,000 kg; Steering; Tire tread left: 50%; Tire tread right: 50% Rear axle 2: Max. axle load: 11,500 kg; Tire tread left: 50%; Tire tread right: 50% Rear axle 3: Lift axle; Max. axle load: 7,500 kg; Steering; Tire tread left: 50%; Tire tread right: 50% Weights Unladen weight: 24,260 kg Payload: 12,740 kg Gross vehicle weight: 37,000 kg Functional Crane: HIAB 855-E6 Hipro, year of manufacture 2014, mounted behind the cab Condition Technical condition: very good Visual condition: very good Financial Information Price: On request Further Information Please contact John de Koning or Mark de Koning for further information.

Condition: new, Finger setter with segmented top clamp PNEUMATIC CYLINDER !!! Including manual back stop Max. bending capacity over the entire working length ----- 1.2 mm Max. working length ----- 2000 mm Max. opening width ----- 30 mm Width of fingers ----- 38 | 38 | 50 | 50 | 76 | 101 | 127 | 152 | 203 | 254 | 254 | 254 mm Max. angle of attack ----- 0 - 135 Weight ----- 540 KG Width ----- 2400 mm Depth ----- 850 mm Height ----- 1175 mm Ledpfx Asga T Dpoa Eohr

Condition: used, Year of construction: 1993, Technical details: sheet width: 3050 mm plate thickness: 6,0 mm distance between columns: 3460 mm no. of strokes: min./max.: 9 / 17 Hub/min back gauge: 750 mm (motorisch) mm cutting angle: 0,5° - 3,0° ° cutting gap adjustment: manuell mm down holder: 18 Stück (hydraulisch) Stück Table dimensions: 380 x 3100 mm total connected load: 7,5 kW weight of the machine ca.: 4,56 t dimensions of machine: L: 2,3 x B: 3,7 x H: 1,8 m Equipment: With side stop L: 1000 × W: 100 × H: 60 mm and stop bar 990 mm, with 8 supports Operation via control panel and foot switch Cutting zone lighting Stroke counter Machine feet Lhedpsu Rni Hofx Aa Eer *