Press brake

EHT TruBend 8400 - 35

Condition: used, Year of construction: 1984, x-travel 2500 mm y-travel 750 mm Redpjtqqnwjfx Afnot z-travel 1000 mm table surface area 2550 x 800 mm spindle taper SK 50 control HEIDENHAIN, TNC 150 B weight of the machine ca. 16 t

Condition: good (used), Year of construction: 1994, functionality: fully functional, feed length X-axis: 1,050 mm, feed length Y-axis: 360 mm, feed length Z-axis: 500 mm, travel distance X-axis: 1,050 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 500 mm, overall weight: 3,000 kg, Equipment: documentation/manual, Tiger FO 135 universal milling machine Description of the machine The machine was purchased new in 1994 and has only been in operation for a few hours. The milling machine is fully functional. The axis movements are smooth and the guides are in good condition. good condition. These have an automatic lubrication system. The table is in good condition and shows hardly any signs of wear. The machine also has a digital readout for the 3 axes, which makes it possible to work with cutter compensation and recurring measurement machining. Operating instructions are included with both the machine and the digital indicator. Technical specifications - Table dimensions 1,400 x 340 mm, 4 T-slots - Automatic traverse path: ➢ Longitudinal X 1,050 mm ➢ Transverse Y 360 mm ➢ Vertical Z 500 mm - Fixing the spindle cone: ➢ Vertical axis ISO 40, automatic locking ➢ Horizontal axis ISO 40, manual locking - Spindle speed range: ➢ Vertical axis 33 ÷ 1,560 rpm, 12 speeds ➢ Horizontal axis 35 ÷ 1,550 rpm, 12 speeds - Installed power: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ Direct current motor 15 Nm - Variable power supplies Continuous speed 0 ÷ 1,500 mm/min - Fast feed ➢ Lengthwise and crosswise 3,000 mm/min Vertical 1,500 mm/min - Universal head with manual shaft lowering of 80 mm - Automatic lubrication with pump - Low-voltage electrical controls on the pushbutton panel of the side arm - Star/delta start - Magnetic thermal protection from Siemens - Net weight 3,000 kg - Machine dimensions (for transportation) ➢ Width 2,300 mm ➢ Depth 2,900 mm ➢ Height 2,400 mm Accessories - Counter supports for cutting shaft - Cutting shaft ø32 mm Tiger FO 135 universal milling machine Description The machine was purchased new in 1994 and has only had a few hours of operation. The milling machine is fully functional. Axis movements are smooth and the guides are in good condition. These have an automatic lubrication system. The table is in good condition and shows hardly any signs of wear. The machine also has a DRO for the 3 axes, which offers the possibility of working Redpfx Aforqwbijnst with milling compensation and recurring measurement processing. Both the machine and the DRO come with operating instructions. Technical specifications - Table dimensions 1,400 x 340 mm, 4 T-slots - Automatic travel: ➢ Longitudinal X 1,050 mm ➢ Transverse Y 360 mm ➢ Vertical Z 500 mm - Fixing the spindle cone: ➢ Vertical axis ISO 40, automatic locking ➢ Horizontal axis ISO 40, manual locking - Spindle speed range: ➢ Vertical axis 33 ÷ 1,560 rpm, 12 speeds Horizontal axis 35 ÷ 1,550 rpm, 12 speeds - Installed services: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor 15 Nm - Variable power supplies Continuous speed 0 ÷ 1,500 mm/min - Fast forward ➢ Longitudinal and transverse 3,000 mm/min ➢ vertical 1,500 mm/min - Universal head with manual shaft lowering of 80 mm - Automatic lubrication with pump - Low voltage electrical controls on side arm push button panel - Star/delta start - Magnetic thermal protection from Siemens - Net weight 3,000 kg - Dimensions of the machine (for transport) Width 2,300 mm ➢ Depth 2,900 mm ➢ Height 2,400 mm Accesories - Counter supports for cutting shaft - Cutting shaft ø32 mm

Condition: used, Year of construction: 2009, greates pass round over bed 1050 mm dist. between centers 6000 mm centre height 520 mm turning length 4810 mm workpiece weight max. (main spindle) 6000 kg Maximum workpiece weight with steady rests 8000 kg max. torque on the spindle 12500 Nm number of spindle speeds 2,8-560 1/min Rodpfxjygxy Us Afnot feed per revolution 0,08-56 mm chuck diameter 630 mm Maximum travel distance of the longitudinal slide 4810 mm Maximum travel distance of the cross slide (suppor 530 mm Maximum travel distance of the tool slide (support 340 mm Tailstock quill diameter 150 mm total power requirement 31 kVA weight of the machine ca. 10500 kg dimensions of the machine ca. 7860 x 1970 x 1480 mm Equipment/accessories: -2 x face plates -3 jaw chucks -2 x steady rests -Multifix holder -Turning tools -Various tips -Technical documentation

Condition: used, Year of construction: 2024, controller manufacturer: Heidenhain, controller model: ND 7013, _____ Description: Year of manuf. : 2024 Control : Heidenhain ND 7013 Spindle bores : 71 mm Turning diam. : 345 mm Turning length : 1500 mm Technical data Center height :260 mm Swing diameter over bed :535 mm Swing diameter over facing slide :345 mm Center width :1.500 mm Spindle head :DIN 55027/DIN ISO 702-3 size 6 Spindle bore :71 mm Spindle diameter in front bearing :100 mm Drive power :7.5 kW Speed range :33 - 1,500 min-1 Metric thread :0.5 - 28 mm Quill diameter :65 mm Quill stroke :120 mm Internal taper :DIN 228 MK 4 Standard equipment :- Roller conveyor cover for leading and traction spindle :- Chip guard rear panel :- Chuck guard with limit switch monitoring :- Chip deflector :- Longitudinal stop with micrometer screw :- Change wheel door with limit switch monitoring :- Braking device for the main drive :- Starting clutch :- LED machine light in the chip guard rear panel :- Multi Suisse size B quick-change steel holder :- incl. 1 BD 25120 quick-change holder :- Coolant device incl. coolant pump 30 l/min. at 0.2 bar :- Tapered sleeve MK5 for the main spindle :- Fixed center point MK5 :- Central lubrication :- Tropical insulation up to max. 45° air temperature and max. 80% relative humidity :- Oil pusher press :- Set of operating keys Rsdpfoyu Ilijx Afnot :- Documentation Additional equipment :- Set of installation plates, 8 pieces :- Num. Position indicator mounted on : Support arm above headstock :- Packaging

Condition: used, Year of construction: 1992, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 205 mm side roll diameter ~ 195 mm Control konv. oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 3200 kg range L-W-H 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls Rsdsxacdvjpfx Afnjt - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Condition: ready for operation (used), Year of construction: 2017, turning length 4000 mm turning diameter 850 mm turning dia. in gap 1150 mm turning diameter over slide 520 mm turning speeds 5.0 - 630 U/min quill: 6 MK quill travel 250 mm spindle bore 100 mm workpiece weight max. 4000 kg bed width 600 mm travel -x axis 500 mm travel -z axis 3700 mm rapid traverse X 1800 mm/min rapid traverse Z 3640 mm/min feeds X : 0.04 - 4.8 mm/min feeds Z : 0.08 - 9.6 mm/min feeds Z1 : 0.02 - 2.4 mm/min engine output 20.0 kW weight of the machine ca. 6800 kg. dimensions 6150 x 1500 x 1500 mm good / well-maintained condition (!!) original price at the time approx. 65.000 euros special price on request Description: - particularly heavy, heavily ribbed and wide machine bed - in a rigid one-piece monoblock design - induction-hardened and ground guide prisms - guarantee long-term accuracy and minimal wear - solid headstock - with high-precision, tapered roller bearing main spindle . and 100 mm spindle bore - excellent smooth running at maximum spindle speed - joystick switch for X and Z feed directly on the support - manually switched 4-stage countershaft gear, - powerful main spindle motor enables exact adjustment of the speed . and high torque for heavy machining - rapid traverse for X and Z axes enables quick positioning of the support . and reduces idle times - adjustable overload clutch in the lock case protects the feed mechanism . against damage and failures - central, handy control for feeds and thread pitches - the feed gear offers a wide range of . diametric, inch, module and metric threads - support and top slide are designed for large cutting forces - higher working precision - user-friendly functions Scope of delivery: - SINO position indicator - TOS 3x jaw chuck .. Ø 400 mm - 4-jaw faceplate chuck Ø 800 mm - 4-way tool holder - Fixed steady rest 40-350 mm - Follow-on steady rest 30-120 mm - Fixed centering point - Reducing sleeves - Chuck protection Rjdpfjxabh Tox Afnjt - Coolant device - Machine leveling feet - Work light - Operating tools - Operating instructions

Condition: excellent (used), Year of construction: 2009, Technical data: Working width: 2600 mm Bending capacity: 16.0 mm Pre-bending: 12.0 mm NC control Upper roller diameter: 330 mm Middle roller diameter: 290 mm Side roller diameter: 270 mm Conical bending device via inclined positioning of the side rollers Mobile control panel with digital display Motor power: 11 kW Rodpfx Afeyg Eulonjt CE mark Dimensions (length x width x height): approx. 5100 x 2100 x 1800 mm Weight: approx. 12 tons The seller is not liable for typographical or data transmission errors. The machine's condition, both visually and technically, as well as wear, is in accordance with its age; used machines are sold without any warranty.

Condition: used, Technical details: turning length: 630 mm swing diameter over slide rest: Hinterdrehschlitten: 250 mm center height over bed: 270 mm centre distance: 900 mm spindle bore: 26 mm range of revolutions per minute - continous: 1,8 - 450 U/min Rjdpjvbh N Refx Afnot return movement speed: 23 / 32 / 46 / 370 / 510 / 740 U/min cross feed: 0,07 - 1,11 / 36 step mm/U longitudinal feeds:: 0,063 - 0,63 / 12 step mm/U tailstock quill taper MT: 5 quill travel: 250 mm Total power requirement: 7,0 kW machine weight approx.: 3,9 t dimension machine xH: 3,2 x 1,2 x 1,8 m Application: Mainly for relief turning and relief grinding of cutting tools (especially hobs with and without thread pitch). Back turning and relief grinding is possible from the front, the back and in the axial direction of the machine. Main drive via 8-stage manual gearbox. Feed gearbox is designed as a 12-stage manual gearbox. Swiveling range of the rear slide = 360deg. Swiveling range of the cross slide = 360degrees Equipment: lathe chuck driving disc Ø 210 mm with fixed tip fixed tip in tailstock with 4 pieces machine feet 3 jaw chuck Ø 250 mm i.D. *

Condition: used, Year of construction: 2011, pressure: 400bending length: 4050column width: 3400electricity performance: 37,5weight approx.: 25.000messurements (LxWxH): 5750 x 2110 x 3440STOCK CLEARANCE – UNBELIEVABLE PRICE!CNC Press Brake – DURMA AD-S 40400 (4 m x 400 tons) Now available at a special price ex works Böheimkirchen: only EUR 79,000 (Original price approx. EUR 170,000) Technical Specifications:Manufacturer: DURMA Model: AD-S 40400 Year of manufacture: 2011 Bending length: 4,050 mm Pressing force: 400 tons Axes: Y1, Y2, X, R + CNC-controlled crowning Motor power: 37 kW Features & Equipment:CNC crowning system, motorized adjustment via control Upper tool: 1010/A/75°, segmented and gooseneck-style Die: Multi-V die Backgauge: CNC-controlled 2 front sheet supports on linear guides CE-certified laser safety system (Lasersafe) mounted on the upper beam Rodpsvfy Sxjfx Afnet Machine fully complies with CE standards Condition: Very good new pump installed One-time offer – available immediately!Only 1 unit in stock – ready for fast delivery – no lead time!Take advantage of this rare opportunity to own a high-performance CNC press brake at a fraction of the original price.

Condition: excellent (used), Year of construction: 1980, turning diameter 300 mm Rsdpfxjytg Uye Afnot turning length 1700 mm swing diameter over bed slide 600 mm total power requirement 12,5 kW