Pneumatic notching machine

EDEL EP 938 S

Condition: new, Year of construction: 2025, SPIRAL DUCT PRODUCTION MACHINE Metformer MTF 1602 TUBEFORMER Designed for the production of round SPIRO-type ducts. The produced duct complies with DIN EN 12237, BS, and Eurovent standards. Features: Coil decoiler with vertically adjustable brake Forming strips for duct production Burr-free high-speed cutting with circular cutting blades LCD touchscreen control Automatic lubrication system Automatic cutting during duct production Production reporting system (daily-weekly-monthly output) Automatic error detection Technical Data: Diameter range: 80–1600 mm Thickness range: Galvanized steel: 0.4–1.2 mm Stainless steel: 0.4–0.7 mm Aluminum: 0.4–1.3 mm Strip width: For 0.4–1.0 mm thickness: 137 mm For 1.1–1.3 mm thickness: 140 mm Production speed: 60 m/min Motor power: 11.25 kW Beading: Smooth, single or double Lock: External lock Cutting system: Circular cutting system Weight: 2900 kg Machine dimensions: 1900 × 2050 × 1500 mm Gjdpewa Skhsfx Acwobk Decoiler dimensions: 1780 × 1130 × 1250 mm Table dimensions: up to 2700 × 950 × 1200 mm Operating Environment: Power supply: 3-phase, 380V, 50Hz Clean surroundings Maximum ambient temperature: 40°C Minimum ambient temperature: -5°C Humidity: 55–85% Altitude:

Condition: refurbished (used), Year of construction: 2024, Manufacturer: Elumatec Type SA/ SAS 142 Overhaul year: 2024 Saw blade max. carbide: 500 mm Drive power saw motor: 4 KW Saw motor speed: 2800 min-1 Cutting speed saw blade 500 mm: 4400 m/min Saw height control: infinitely variable, fully electronic Working range square 90° max.: 130 x 130 mm Working range flat: 90° max.: 190 x 130 mm Working range round: 90° max.:150 mm Pneumatic feed length: 5-560, 10-1120 mm Compressed air connection, on site 6 bar Weight(saw)approx.: 800 kg Dimensions LxWxH (saw)approx.:2900mm x 1400mm x 1500mm Installation area LxW: 2900mm x 1400mm Additional description Elumatec SA/ SAS 142 4KW Retrofit Elumatec SA 142 4KW Retrofit Fully automatic sawing machine for non-ferrous metal and plastic After completion of the retrofit, the machine is in mint condition, both technically and visually. The machine will be overhauled in our company at the customer's request. Among other things, the following points were renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI control panel - New electrical components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve terminals - Maintenance of minimum lubrication system - Replacement of general wear parts - Overhaul of the cab Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the warranty. Gsdpfx Acsuiy Nyswobk Optional: - Extension of the sawing area to flat 90° max.: 300 x 120 mm - Splitting extension (for a high-quality cut surface without return marks) - Servo-controlled material feed - Saw blade feed Servo-controlled - Mass clamping device Feed vice - Delivery and installation on your premises - Training of your employees

Condition: new, plate thickness 1,6 mm 4 t blade length 156 mm angle adjustable from - to fest Grad table surface area 450m x 305 mm total power requirement Handbetrieb kW Gjdpfx Acoftd Uaswjbk weight of the machine ca. 95 Kg Dimensions (LxWxH) 530 x 380 x 480 mm

Condition: used, Year of construction: 1988, Distance between centres 1200 mm Speed A) 70 - 380 U/min. turning speeds B) 380 - 2000 U/min weight 2,2 t +++++ Godpok Sat Dsfx Acwebk Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Year of construction: 2000, condition: excellent (used), daylight width: 170 mm speed: approx. 25 m/min working direction: any Gjdpfx Acop E Eglswobk work roll diameter: 120 mm barrel length: 150 mm backup rolls: backup block/chain

Year of construction: 1980, condition: good (used), A used very well preserved cycle controlled lathe from Weisser Heilbronn with SIEMENS control. centre distance 2000 mm centre height 295 mm Swing over bed 600 mm Swing over cross slide 260 mm Swing diameter in the bend 800 mm Total length of the crank 375 mm Bed width 450 mm Plan travel X-axis 350 mm Longitudinal travel Z-axis 1850 mm Spindle nose DIN 55022 size 8 Spindle speed Number 18 14 - 1400 rpm spindle bore 71,5 mm Diameter of front bearing 110 mm feed range 0,01 - 40,95 mm/rev rapid traverse 8 m/min Direct current drive 15 kW 400V 50Hz Max. permissible torque at the spindle 2500 Nm Tailstock quill 80 mm quill stroke 250 mm Gedpsgyy I Ajfx Acwobk inner taper quill MK 5 Length x width x height Weight of the machine 5500 kg Accessories Tailstock Pneumatic three-jaw chuck with interchangeable jaws 315mm Quick change holder "MULTIFIX "in front of the center size "C Quadruple turret behind the center Tool holder Coolant device Pneumatic steady rest Technical data and dimensions: Errors excepted. Videoconference via whatsapp possible by appointment

Year of construction: 1998, condition: good (used), Used Emmegi Automatica 550 Single head cutting-off machine from 1998 in good condition for 90 degress cutting of aluminium profiles, with pneumatic bar feeder and stop, as well as adjustment of cutting length and tolerance op to +/- 0,10 mm of the required size. Specifications: • Blade diameter: 550mm • Blade drive power: 4 kW • Blade drive rpm (50hz): 2840 1/min • Total installed power: 4,3 kW • Operating pressure: 6-8 bar • Max. Feeder stroke: 500mm Gbedpfstlpl Hex Acwsk • Max. Clamp opening, feeder: 410mm

Condition: excellent (used), strip width: 6 - 200 mm strip thickness: 6 – 0,5 mm speed: max. 100 m/min working direction: any work roll diameter: 250 mm barrel length: 250 mm Gedpjp E Ed Rofx Acwsbk roll core for rolling rings: 190 mm

Condition: good (used), Centre height: 290 mm Gbsdpfjxtu Erex Acwok Swing diameter over bed: 580 mm Centre distance: 3000 mm Weight: 2800 kg Equipped with a ZIMMER DY 75 flat belt grinder, year of manufacture 2010, e.g. for shaft or tube grinding Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, functionality: fully functional, Year of construction: 2024, control type: manual, working width: 1,270 mm, folding beam adjustment: 46 mm, bending angle (max.): 135 °, sheet thickness (max.): 2 mm, back gauge adjustment: manual, back gauge: 760 mm, overall weight: 380 kg, total length: 1,600 mm, total width: 850 mm, total height: 1,175 mm, Equipment: documentation/manual, Upper and lower blade removable in segments Including manual back stop PNEUMATIC CYLINDER !!! Max. bending capacity over the entire working length ----- 2 mm Godpfx Ajga T A Iocwsbk Max. working length ----- 1270 mm Max. opening width ----- 46 mm Width of fingers ----- 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 250 | 275 mm Max. angle of attack ----- 0 - 135 Weight ----- 380 KG Width ----- 1600 mm Depth ----- 850 mm Height ----- 1175 mm