Band straightening machine

DURMA HAP 3080

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 164 h, working width: 3,100 mm, operating speed: 8 mm/s, reverse speed: 75 mm/s, overall weight: 10,500 kg, total length: 4,500 mm, total width: 1,700 mm, total height: 2,500 mm, input voltage: 380 V, pressing force: 200 t, power of the servo motor: 15 W, With manual, part list and all available technical documents. Itsdpfx Asvm Elaoa Eer

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: 08063406 3441, roller (bottom) diameter: 265 mm, roller (top) diameter: 285 mm, roller length: 3,100 mm, sheet thickness steel (max.): 15 mm, overall weight: 8,000 kg, total length: 5,300 mm, total width: 1,200 mm, total height: 1,700 mm, power: 14.71 kW (20.00 HP), type of input current: three-phase, Equipment: emergency stop, Roll bender for sale from a private individual. Rolling capacity 5xD = 15 Prebend capacity 5xD = 12 Prebend capacity 1,3xD = 9 Itodpjvl H Rbefx Aa Ejr

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 320 h, control type: CNC control, degree of automation: manual, actuation type: electric, controller model: EC10, bending force (max.): 100 t, working width: 3,000 mm, stroke length: 300 mm, number of axes: 6, type of crowning: manual, back gauge adjustment: CNC-controlled, overall weight: 11,000 kg, total length: 4,000 mm, total width: 2,300 mm, total height: 2,700 mm, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 50 Hz, number of support arms: 2, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, lower tooling, safety light barrier, upper tooling, Servo-electronic bending Itodpexhgplefx Aa Ejr Wila tool holder: lower tool hydraulic clamping, upper tool hydraulic clamping, safety light curtain according to MRL/2006/42/EC, machine documentation, 2 support arms, manual crowning, CNC Y1/Y2 axes with 300mm stroke, CNC-controlled X axis, Z1+Z2 CNC back gauge fingers individually adjustable laterally, R axis CNC back gauge fingers height adjustable, network connection, graphical programming, 1 set upper/lower tool, length 2500mm Fully electronic drive Up to 30% higher productivity Up to 50% energy savings No harmful oil Low-noise operation Full working area Touchscreen operation

Condition: like new (used), functionality: fully functional, Hydraulic punching machine Brand: Boschert Model: Ecco Line EL 500 Digital Features: Punching force: 28 t Work table dimensions (width x length): 500 x 1000 mm Maximum sheet thickness: 6 mm (up to a punch diameter of 40 mm) Maximum die diameter: 105 mm (up to 1 mm sheet thickness) Maximum number of strokes: 180 strokes/min Switch-on value: 5 kW Voltage: 3 x 400 V / 50 Hz Total weight: 2 tons Dimensions of the EL-500-Digital punching machine (length x width x height): 2400 x 1580 x 1540 mm Tool cabinet, 4 tool drawers Itjdjrn Swkepfx Aa Eor Foot pedal Includes all the accessories shown in the pictures.

Condition: excellent (used), Year of manufacture: 1991 Iedpfewq Dpqox Aa Estr Model: ITPS III Serial number: ITPS 80C 25 P1C226 Maximum pressing force: 1800 kN Working stroke: 115 mm Power supply: 415 V, 50 Hz, 3 phases Rated current: 119 A Installed power: 18.5 kW Machine weight: 4940 kg Inventory number: 9.14 Control: Delem DA-65R The machine starts up, but the control unit does not respond to commands. The previous owner replaced the original AMADA control with a DELEM unit.

Condition: good (used), Press Brake Brand: AMADA Model: HFT 80/25 Capacity: 2500 x 80T 4 axes Distance between uprights: 1800 mm Iodpfx Aaewivdds Eotr Dimensions: 3500 x 1500 x 2100 mm Weight: 6,500 kg Equipped with new and used tooling

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 45,208 h, laser hours: 32,072 h, laser power: 3,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 150 mm, feed rate X-axis: 240 m/min, feed rate Y-axis: 240 m/min, feed rate Z-axis: 240 m/min, positioning speed: 240 m/min, positioning accuracy: 0.02 mm, year of last overhaul: 2024, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 115 mm, working range: 3,000 mm, Equipment: cooling unit, documentation/manual, safety light barrier, The laser is in operation, can be inspected and tested. Regularly serviced in good technical condition. The machine is also sold as a Liftmaster Compact. Isdpfx Aasv Im Irj Ejtr

Condition: used, bending length: 3100pressure: 80motor power: 5,5oil filling: 100 Itodpjru Unbjfx Aa Ejr

Condition: excellent (used), Year of construction: 1996, stroke length: 160 mm, pressing force: 120 t, Hydraulic press brake Fab. DURMA Typ. HAP 30120 Year 1996 Technical details Make: DURMA Type: HAP 30120 Year of construction: 1996 Capacity: 120 tons Effective length: 3050 mm Stroke: 160 mm Engine power: 11 kW Dimensions: L 4,150 x W 1,950 x H 2,600 mm Iedju Iarbspfx Aa Ejtr Weight: 7.5 tons Equipment - Controlled backgauge - Immersion depth adjustable via control - Controlled axes: X, Y - 2 support arms - Technical documentation - Tools: o Multi-V die V12, V20 (slightly damaged), V13, V16, V45, V15, V10, V65 Length 3,050 mm o Slightly cranked upper tool, H 150 mm, L 2,970 mm, segmented All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 2008, Equipment: CE marking, lower tooling, safety light barrier, upper tooling, AMADA HFE2204 Pressbrake Pressforce: 220t Bending length: 4m Backuage: 4-axis backgauge system Itjdpfxow I Dmcj Aa Eer Clamping system: Amada