Sewing machine

Durkopp adler 867-190322

Condition: excellent (used), DURKOPP ADLER 867 - 190322 - M GOLD Gsdpfewxr Nnex Admoil - Triple compound feed (walking foot and feed dog) - Large hook (26 mm bobbin) - Automatic thread trimmer - Programmable initial and end backtacking - Speed reduction system for increased presser foot lift - Maximum thread thickness: 10/3 Nm - Maximum stitch length up to 12 mm (two separate, instantly switchable length adjustments) - Presser foot lift height up to 20 mm - Adjustable presser foot stroke up to 9 mm - Arm length to needle bar: 335 mm - Maximum stitch rate: 3,800 stitches per minute - 230V motor – Efka Variocontrol 810 electronic control - Compressed air required for operation Several units of this model available Machine in very good technical condition, ready for immediate operation Price per machine: 2,450 Euro net Courier shipping available

Condition: excellent (used), Durkopp Adler 767 20 pcs in stock / many models Giedpov Nphdofx Admol Can be used on both 220V and 330V

Year of construction: 2024, condition: new, DURKOPP ADLER 867-190342-M-70 WALKING FOOT SEWING MACHINES -1 needle -3 transport -XXL HOOK 32 -Full automatic -70cm Excellent sewing technology meets powerful and energy-efficient DC Direct Drive ECO and CLASSIC describes clearly defined level of functionality and upgradability of all machines out of the M-TYPE platform. ECO stands for perfect seam results, low maintenance construction and a modern design without automatic functions like thread trimming, sewing foot lift, back tack, etc. Gijdpotuqa Rsfx Admel CLASSIC Goldline means machines with highest level of convenience and performance for maximum efficiency and flexibility. Automatic functions like sewing foot lift, thread trimmer and automatic back tacking as well as quick stroke adjustment, 2. integrated stitch length and pneumatic additional thread tension combined with the huge range of sewing equipment and additional equipment these machines meets the requirements in the field of medium heavy duty applications. Another milestone of the M-TYPE platform is the innovative drive concept from Dürkopp Adler. Machines with the sub-classification "M" are provided with a factory fitted integrated DC Direct Drive. These power sources stand for maximum torque without gear reduction, impressive dynamics in the acceleration and braking phases during sewing, precise stop positioning of the needle even at high operating speed, highly energy efficient as well as a quiet and vibration free machine operation. Another integral part of the drive concept is the in-house designed control unit. The DAC CLASSIC (Dürkopp Adler Control) with the corresponding operation panel OP-1000 is tailored designed to the Direct Drive characteristics and in terms of functionality and user comfort, leaves little to be desired. DA Direct Drive, integrated in the upper housing, with superior penetration power in combination with the excellent stitch technology of the M-TYPE Impressive dynamics in the acceleration and braking phases during the sewing operation Precise stop positioning even at high operating speed Quiet and vibration free machine operation Very energy efficient Service friendly machine and drive concept Gearless power transfer without belt reduction DAC CLASSIC controls including operation panel OP-1000 for optimum functionality and extraordinary user comfort

Condition: excellent (used), zig zag with thread trimmer , full automatic . Warranty & Delivery The Machine si delivered complete The quality assurance of the machines is entirely conferred by our team of professional technicians. The machine is of superior quality, recommended for all types of workshops as well as for factories with medium and large productions. When purchasing this machine, you have a 6-month warranty and a 5-year post- warranty. WORLDWIDE DELIVERY! We always have more than 1000 machines in stock so that each customer can choose from several options. With over 20 years of experience in the textile industry and over 10,000 satisfied customers, we make sure that your plans become successful businesses! Giedpfsrq Ekksx Admel

Condition: good (used), 50 pcs on stock many models Godpfx Aelif N Ijdmeil

Year of construction: 1987, condition: used, machine/vehicle number: 7.0176, Note: We have 6 pieces of this machine in stock! Manufacturer: Gildemeister Type: GS 36 - 6 A/C Machine No.: 7.0176 Year of manufacture: 1987 Weight: 11t General / technical data: Portal-6Spindle automatic lathe spindle pitch circle: 300mm number of longitudinal slides: 6 number of cross slides: 2 large cross slide stroke: 60mm largest longitudinal slide stroke: 125mm Spindle speeds: Stepless 562 - 3373 rpm Main time range: Stepless 1,95 - 78 sec. Secondary time range: 0,79 - 2,13 sec. Drive power: DC motor spindles 20kW; feeds 8kW footprint: approx. 1720 x 4700mm Remark: The machine is not convertible for bar work. Equipment: - 1 creep feed drive for set-up operation - 1 automatic central lubrication device - 1 coolant device with pipes and pump - 1 cross slide, position 3 (without curves) - 1 cross slide, position 5 - 6 longitudinal slides (without drive, without curves) - Feed for independent longitudinal slide, flexible, position 1-6 - Programmable logic controller IPC 620 - Noise protection 80db - Automatic feed restart with electrical protection of the side door - Schanier belt chip conveyor - Design of the machines with DC drives for speed and feed - KIENZLE terminal 2450-07 with signal interface and data transmission control. Accessories: Electrical version: The electrical equipment consists of a DC main drive with power 20 kW for the spindle drive and a three-phase servo motor for the feed drive with power Gedpfein Ub Tex Admjil 8kW (protection class IP 54) and corresponding switchgear and control devices as well as the necessary installation. Total connection of the machine 32kW/h.

Condition: like new (used), needle feed and alternating feet and a maximum stitch length of 12 mm. The 867-190020 ECO is equipped with a large vertical hook. With the M-TYPE series a vision has become reality - a platform for medium heavy duty machines creating a new dimension of functionality and flexibility for all kinds of medium -weight applications. Gijdpfx Ajv D Hggsdmjl

Year of construction: 2024, condition: new, AMF Reece S4000-ISBH AMF Reece S4002-ISBH AMF Deco 3000 ATT Motor DC Drive Sewing Speed 1,500 - 3,800 spm Stitch Type Single Thread Chainstitch Stitch Density 3 - 12 s/cm (8 - 30 spi) Stitch Bite 1.7 mm - 2.3 mm (1/15" ~ 3/32") Number of Buttonholes 1 - 8 Distance between buttonholes 4 - 63 mm (3/16"~2-1/2") Adjustable in Program Buttonhole Length 15.8 mm - 25 mm (5/8" - 1") Max Distance from Edge 67 mm (2-5/8") Max Distance First to Last Buttonhole 63 mm (2-1/2") Angle Adjustable 0~6° Thread Trimming Pneumatic Gijdpfx Ajtp Nwbedmsl Recommended Thread Core Spun Polyester #50 Recommended Needle AMF Reece Series 750 #90/14, #80/12, #70/10 Clamp Height 12.7 mm (1/2") Max Work Thickness 3 mm (1/8") Clamping Step Motor Lubrication Semi-Automatic Control System PLC Table Types Crosswise Electrical Requirements 230V, 50/60Hz, 1 Ph Air Requirements 5.5 basr (80psi) 14ℓ/㎥ (0.5cfm) Dimensions Head and Table 1100 mm(L) x 600 mm(W) x 710 mm(H) Dimensions Packed Weight 1300 mm(L) x 770 mm(W) x 1150 mm(H) 171kg

Condition: used, machine/vehicle number: 22027, Stanzautomat / Calender - Block Punching Machine Plastograph PZ 599Baujahr / Year 1998 Arbeitsbreite / Working width 120 - 600mm Papierlänge / Paper length 100 - 550mm Arbeitsbreite min. 95mm - max. 600mm Hubzahl einstellbar / number of Strokes adjustable 30 - 120/min. Flachstapelanleger / Flat Pile Feeder 5 Stanz-Formen / 5 Punching Tools: Types Wire-O 2:1 / 3:1 - Plastik-Effekt / 3:1 4x4mm / 3:1 4x6mm Werkzeug 4x4mm mit Daumenstanzung / Tool 4x4mm with calender hole punchAuslage Rüttler / Delivery Jogger Panel Operation and Controls Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Gedpoh Uk Haofx Admjil On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,6 - 3 Panels thickness (min/max) mm 8 - 60 / Working width (min/max) mm 225 - 3000 Numerical Control Power Control PC 22 /Software: Wood Commander Adjustable feeding speed (m/min ) 15 - 32 Distance (center-axes) of the Disappearing Dogs (mm) 400 SIZING PART (for each side): Anti-chipping Milling Unit 1 x Kw 4,5 / Hogging Units KD 11 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 + SERVO Band Pressure zone "A" Edge coils supporting unit (No. 2 reels) Snipping (end-cutting) unit HL 84 (2 x Kw 0,22) Rough Trimming unit (2 x Kw 0,55) Fine Trimming unit 2 x Kw 0,4 Corner Rounding unit (Contour Trimming) FF 12 (4 x Kw 0,4) Gedop N D Ngspfx Admjil LEFT SIDE: 2 x Jumping Milling Unit (for grooving) UF11 (Kw 4 x 2) 0°-90° RIGHT SIDE: 1 x Jumping Milling Unit (for grooving) UF11 (Kw 4 x 1) 0°-90° Profile edge scraping unit PN10 (PNEU) Finish processing unit (Glue scraper + Buffing unit) FA 11