Conveyor belt ascending conveyor belt conveyor system

die magnetprofis 2021100803

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,100 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, year of last overhaul: 2024, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Gsdpfx Aeu Thhroayokf Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the turbulator replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Used in good condition 4 pieces in stock Gkodsvt Szzspfx Aayof

Year of construction: 2020, condition: new, DESCRIPTION The demineralized water station is used to produce the so-called demi water using ion exchange technology. The station consists of 3 columns Gjdpfx Aajfz Nakjyjkf Strongly acid cation exchanger working in the sodium cycle, Strongly basic anion exchanger working in the chloride cycle, Carbon filter Our RDI-2 / RDI-4 demineralization stations are equipped with fully automatic control heads. Rouezts The columns are made of AISI316L steel

Condition: new, capacity up to 2 000 kg/h Gjdpfob I Ubwex Aayokf power 1,5 (2,0) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 1 600 mm width 700 mm height 2 100 / 2 350 mm insertion resp. discharge height 800 mm weight 200 kg material 1.4301 / AISI 304 connections: connection for cleaning ½ “ inside connection for washing bath 2 “ outside fruit discharge height 1 545 mm suitable for pomaceous fruit

Year of construction: 2023, condition: new, Mill for fine grinding of flour, coffee, dried vegetables, spices and more.. grinding range from 20-120mesh. capacity 100-400kg per hour. engine speed 3400 per min. machine weight 600kg. The power needed to operate the machine is 11kW. The machine has an additional dust filtration extraction. The whole machine is made of SUS304 stainless steel. PayPal payment available!!! Gsdpfx Ajk S Rpusayokf

Year of construction: 2018, condition: as good as new (ex-display), GHIBLI DHR 8 is the standalone system for thermal weeding: the 100% ecological solution against weeds thanks to the action of high temperature saturated steam. Thermal weeding has many advantages for the environment and health as: Gksdpjg A Rhkefx Aayef • it uses only water • it is safe, even in close proximity to sensitive places such as kindergartens, schools, hospitals. • its use does not require prior notification under the legislation in the field; • it is safe for exposed workers, people and animals, during and after the treatments;

Condition: good (used), The scope of delivery includes: 01x back wall grille, used material color: cream white total width: approx. 2.200 mm Gkodpfxem E I Nvs Aayof total height: approx. 1.200 mm mesh size: approx. 60 x 50 mm Frame profile dim. (width): approx. 20 x 20 mm Frame profile dim. (height): approx. 15 x 15 mm wire thickness: approx. 3,00 mm weight/pc.: approx. 8,14 kg Internal designation: RW-2

Condition: good (used), Year of construction: 1985, functionality: fully functional, pressing force: 50 t, bale length: 1,000 mm, bale width: 750 mm, bale height: 750,750,750 mm, bale weight: 500 kg, input voltage: 400 V, overall weight: 7,500 kg, oil tank capacity: 500 l, power: 30 kW (40.79 HP), empty load weight: 7,500 kg, input frequency: 50 Hz, Manufacturer: Paal Typ: Pacomat V Year of construction: 1985 Press power main press: 50 t Specific press capacity: 5 kg/cm² Feed channel: 1.000 x 720mm (l x w) Theoretic throughput rate: 200 cbm/h Bale size: 700 x 1.000 mm (w x h) length adjustable Driving motor: 30 kW Gedoic Rl Djpfx Aayekf Bale weight: approx. 500 kg Machine weight: approx. 8t The hydraulic unit is functional, the drive motor is in the removed state.

Condition: excellent (used), Year of construction: 2006, Manroland R705+LV Year: 2006 Impression count: approx. 81 million Available: immediately Equipped with: Color Pilot Ink temperature control with Graphometronic cooling system Technotrans Beta d dampening system IR/TL dryer Roland Seccomatic Gksdpfx Aajxyixysysf APL plate changer Manual nonstop feeder Manual nonstop delivery Ionisation feeder Grafix Cantronic 3000 powder unit Paper dust extraction in unit 1 Blanket washing device Impression cylinder washing device

Condition: used, Späneförderband / Waste Conveyor Busch KF 110-80 HF 35 Baujahr / Year 2000 Förderhöhe / Conveying height 1100mm Schüttlänge / Length of delivery chute 800mm Gjdpjvkuqmofx Aayjkf Fördergeschwindigkeit bei 50Hz / Conveying speed with 50Hz 0,40m7s Gewicht / Weight 94kgs Waste Conveyors on Saddle-Stitchers, Perfect Binders, Three-Knife Trimmers Späneförderbänder an Sammelheftern, Klebebindern, Dreischneidern Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test