Tapping machine

DESOUTTER PN 383813-AFDE 610

Condition: new, Modern, precision pillar drilling machine based on the proven UNIMAX 3 concept, featuring stepless feed drive, automatic tool ejector, and series-standard chip breakage control. The digital display shows feed rate, speed, and drilling depth. Reversible switch for right/left rotation. Emergency stop button. Full motor protection. Pre-configured machine with special equipment including a threading unit, single-cut function, and LED lamp. Normal drilling capacity in E 335: 30 mm Threading capacity: M 20 Spindle: MK 3 Feed rate steplessly adjustable in the range: 30 - 400 mm/min Drilling depth programmable: 125 mm Overhang: 260 mm Distance spindle/table: 90 to 840 mm Table surface: 500 x 365 mm Column diameter: 110 mm Overall height: 1,900 mm Weight: 280 kg Motor with pole change: 0.8/1.5 kW Djdpof Ey Ausfx Akkeuw Spindle speeds steplessly adjustable: Drilling range A: 80 - 1,440 rpm Drilling range B: 180 - 3,200 rpm Pre-configured machine including special equipment: - Threading unit - Single-cut function - LED lamp

Year of construction: 1978, condition: used, machine/vehicle number: 068242, Cup wheel diameter: 175 x 60 x 51 mm or 125 x 40 x 51 mm 2 grinding wheel speeds: 1450/2900 rpm Table size: AT-F 205 x 345 mm Djdpfjbx Elijx Akkjuw Space required: 1070 x 650 x 1180 mm Drive motor: 500 V (with 380 V, 1/3 power loss), accordingly 0.6 kW

Condition: good (used), Year of construction: 1992, Indoor crane, crane, electric wire rope hoist, hoist, motor winch, motor winch, tackle, traction winch, block and tackle -Manufacturer: steel, crane chassis with electric cable pull -Crane chassis: Type GO 24 20 16 -Traveling speed: 20 m/min -Roller pitch: 800mm Duodpfx Akol Tuvdoksw -Cable: Type AS 2010 -Traction: 1000 kg / load capacity 4000 kg -Drum speed: 16 m/min / stroke 4 m/min -Lifting height: mm -Transport dimension: 1250/1180/H400 mm -Own weight: 356 kg

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, pressure:63 t Duodpfofx Hv Hox Akkew throat:250 mm stroke:8 - 100 mm no. of strokes:120 Hub/min table::715 x 500 mm dayligth:330 mm ram adjustment:63 mm clamping plate:700 x 480 mm hole in the table:240 mm Hole in clamping plate:110 mm dimension of ram:450 x 280 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:1,2 x 1,7 x 2,7 m hydraulic tilting single column eccentric press, tilting in 4 steps, opening to rear (325 x 500mm) and below (360x160mm) with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot-trip operation possible, operating-mode selector for adjustment of continuous or single stroke, emergency cut-off, piece counter, various accessories

Condition: new, Year of construction: 2024, The Just Lift cranes, models JL250 to JL750, from Just Lift have been developed to accelerate and optimize all processes related to lifting and logistics, increase productivity, and at the same time ensure maximum safety and ergonomics for the operator. - Motorized drawbar head guidance - Arm control with remote controls - Hydraulic lifting and extension - Anti-tipping system as standard - 100% electric Max. forward travel speed km/h 4.0 Max. reverse travel speed km/h 4.0 Lifting system, max. load capacity kg 250 to 750 Number of operators 1 Arm lifting speed mm/s 22.00 Arm lowering speed mm/s 15.00 Arm extension speed mm/s 7.00 Arm retraction speed mm/s 5.00 System pressure bar 125.00 Oil type ISO VG 46 Oil volume l 2.00 Weight without batteries kg 610 to 1,080 Total weight incl. 105/130A AGM batteries kg 680 to 1,146 Length max mm 2,835 Length min mm 1,891 Width mm 980 Height, steering wheel/drawbar mm 1,229 Height max mm 3,030 Height min mm 2,313 Lifting height max mm 3,010 Wheelbase mm 1,000 Turning radius mm 1,050 Dujdpeh Tx R Tsfx Akkow Currently, we can only offer new equipment.

Condition: good (used), 1 used surface grinding machine Manufacturer: Jung Model: HF 50 Technical specifications: - Z-axis travel: 400mm - X-axis travel: 500mm - Y-axis travel: 200mm - Table length: 720mm - Maximum spindle speed: 4000rpm - Table width: 200mm - Minimum spindle speed: 1000rpm - Transport dimensions: 2300mm x 1500mm x 1700mm (L x W x H) - Transport weight: 2000kg Equipped with: - Digital readout - Diaform device Dusdpfx Asxgbb Tskkjw

Condition: used, Year of construction: 1978, machine/vehicle number: 150 359 - 11683, functionality: fully functional, For sale are the PS160 (2 units) and the PS140 (1 unit). One is 250 metric tons, the other is 140 metric tons. The PS160 is one of the complete machines and is in operation; the PS160 does not have the control cabinet. Dusdpot Ucpbjfx Akksw The machines are for sale as a single unit and individually. Inquire by phone or email!

Condition: new, saw blade diameter: 550 mm, compressed air connection: 7 bar, Equipment: documentation/manual, - Saw blade 550 mm - Double miter - 4 pneumatic clamps - Hydrocheck system - Mist lubrication system - 1 roller conveyor 300 cm - 1 roller conveyor 300 cm with length stop - Blow gun - Protective cap - documentation - 400V Dedpferh Dkyox Akkouw

Condition: used, Year of construction: 1996, Vollmer CHC 260 Djdpfx Akjyuc Ifokjuw Year of manufacture: 1996

Year of construction: 2010, condition: ready for operation (used), Electrode force: 100daN, welding capacity: 255kVA, nominal input: 80kVA, with Cooling System DALEX DRF 5.2. Dujdpfx Akeiknv Ejkow