Cut-off machine

Degen TAM 25/600

Condition: refurbished (used), Year of construction: 2025, Function The TAM 25/600 cuts off and face-grinds ejector pins, core-pins and punching-dies precisely within seconds! Workpieces from .032 to 1“ diameter, high speed Hfedpefig I Njfx Afnjc steel or thungsten-carbide can be cut easily. Just insert the workpiece into the quick acting chuck, adjust to desired length and cut it at once. Optional there is an auxiliary chuck for very thin, short or stepped pins. Your advantages: • Quick acting chuck easy to use • Rapid insert and remove of workpieces • Cut-off and face-grind in one clamping • Auxiliary chuck for very thin, short or stepped pins After cutting off the work piece move it to end position, snap in lock-pin and measure it by a micrometer. Now finish workpiece to specified size by advancing the fixture using the micrometer screw. To dress the grinding wheel move grinding spindle forward. It will now be dressed automatically by the integrated dressing- diamond. This will leave the micrometer screw at 0-position at all times. Your advantages: • Precision advance of workpiece through micrometer-screw • Integrated dressing diamond for grinding-wheel • Water-cooled cutting and grinding in standard equipment • Adjustable grinding spindle to maintain zero "0" - position setting between cut-off and grinding-spindle The precision Drive motor 1,1 KW 400 V 1,2 HP 220 – 440 V Cut-off-spindle 11000 rpm 11000 rpm Grinding-spindle 4400 rpm 4400 rpm Cut-off-diameter limits 0.5 – 25mm 0.032 to 1“ Cut-off-length limits 600 mm 23 – 5/8“ Cut-off wheel 125 x 1.0 x 20 mm 5“ x 0.04 x 20 mm bore Grinding wheel 100 x 50 x 20 mm 4“ x 2“ x 20 mm bore Base dimensions 700 x 500 mm 27 – 1/2“ x 19 – 5/8“ Net weight Kg 135

Condition: excellent (used), Year of construction: 2004, operating hours: 1,000 h, functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 350 mm, turning diameter: 200 mm, travel distance X-axis: 240 mm, rapid traverse X-axis: 12 m/min, Hembrug Mill-Turn Machine Model: Slantbed Mikroturn 100 CNC Siemens 840D Control Hsdpfx Afjwcfgbjnsfc Approximate Actual Run Time Hours: 1,000 Hydeostatic Spindle Hydrostatic Ways Scale Feedback Suspended Granite Bed Garnite Spindle Housing Coolant Pump Coolant Circulation Pump Pneumatic Bearing Purge Hydraulic Temperature Control Coolant Temperature Control Return Oil Pump and Reservoir for Remote Location of Hydraulic / Cooling Unit. Options & Additional Purchased Features: Tailstock Vacuum Pump for Vacuum Chucking Programable Controlled Spray Mist C-Axis Milling / Drilling Renishaw Tool Touch Probe Non-Contact Tool Incoming Air Dryer / Filter Thousands of Dollars of Brand New Tooling: Live Center Tailstock Taper Adapter 8” Micro-Centric Pneumatic Chuck 3 Sauter Straight Live tooling heads 2 Sauter 90 degree Live tooling heads 1 Special VDI offset Tooling holder 16 VDI Tool Holders for Turning, boring, and on center drilling. Tool Pick-up Video System Additional Backup Hard Drive with Software Fully Loaded and Tested. Extra Siemens Control Pannel Complete Set of Manuals Machine Upgrades I added at additional cost. New Digital Hard Drive New Backup Hard Drive with software already loaded, plug and play ready, no downtime. New Z-Axis Heidenhain Scale Rewound Hydraulic Pump Motor, factory motor was running too hot for my liking. Replaced Operator Panel, back light on monitor went out, have the original, back light needs replacing. 50 Foot Extended Wiring Harness For Remote Location of Hydraulic / Cooling Unit.

Condition: excellent (used), Here we offer you a Zwick / Roell tensile testing machine table-top testing machine.Zwick / Roell material testing machine BDO-FB0.5TH load in tensile / compression direction 500 N height 1565 mm , width 292 mm , depth 469 mmwidth of the test surface: infiniteTest range depth: 100 mmMax working stroke w.o. Accessories 1266 mmPC or printer interface RS 232Required PC connection (for PC operation) COM 1Performance data: 115/230 V (PH, N, PE)Rated power : 0.4 kVAN power frequency: 50/60 HzWeight: 47 kgType: BDO-FB0.5THCondition: used / usedScope supplied: (See picture)(Changes and errors in the technical data, details reserved!)We will be happy to answer any further questions you may have on the phone. Hfedod Sr S Ispfx Afnjc

Condition: used, Year of construction: 2002, Technical details: turning diameter: 475 mm turning length: 1500 mm control: HEIDENHAIN MANUAL PLUS 4110 turning diameter over slide: 260 mm turning speeds: 3000 U/min turret head: 12 Pos. spindle bore: 78 mm Hfedpfx Afjxhqqmjnsc quill stroke: 120 mm weight of the machine ca.: 3,1 t dimensions of the machine ca.: 3,2 x 2 x 1,9 m SAUTER turret 12 pos. , VDI 30 chipconveyor, 4-jaw chuck approx. 74.000h "machine on" *

Condition: excellent (used), Year of construction: 2018, operating hours: 21,000 h, functionality: fully functional, machine/vehicle number: S4E184001, turning diameter over cross slide: 430 mm, turning length: 670 mm, turning diameter: 220 mm, spindle bore: 45 mm, spindle speed (max.): 6,300 rpm, overall weight: 4,300 kg, Used CNC hard turning lathe with counter spindle Manufacturer: EMCO Model: Emcoturn 45E Year of manufacture: 2018 Few operating hours Control: Siemens 828D Number of tools: 12 driven units Max. speed: 0-6000 rpm Hedpfx Afow Rrvwjnjfc

Condition: reconditioned (used), Year of construction: 1992, functionality: fully functional, center height: 150 mm, grinding length: 620 mm, center width: 680 mm, grinding wheel diameter: 350 mm, total width: 500 mm, Condition of the machine: The machine is currently in a used, non-overhauled condition. The following work carried out on the machine: - Complete disassembly of the entire machine except for the guides - Replacement of all sealing and wear parts of the entire machine - Replacement of the infeed spindle of the X-axis - Replacement of the main bearing of the workpiece spindle - Replacement of grinding spindle - All machine assemblies are restored to as-new condition Geometry: - Scraping of the X-axis guide - Scraping the Z-axis guide - Grinding the X-axis table Hodpfxjrz Nflo Afnsfc - Grinding the Z-axis table - Grinding the upper tables - Grinding of the assembly housing (workpiece headstock, grinding headstock and tailstock) - Creation of measurement report for TSCHUDIN cylindrical grinding machine Painting: The main assemblies are repainted, the rest of the machine retains the original paintwork Electronics: The complete electronics of the machine are checked, tested and defective switches and cables are replaced

Condition: new, Extraction capacity of filter unit at spigot*: 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Noise level*: 52 db(A) Dimensions L/W/H in mm: L 329 / W 374 /H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on the filter equipment Special voltage or special colour on request Application: Extraction of oil mist and smoke, for small to very large machine workrooms. Your advantages of the ELBARON series: - 18 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke. For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as standard and can be controlled, for example, using a laptop. The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects. Hjdpfx Afeh Rdwxsnjfc

Condition: used, Intake opening: 1.200 x 1.600 mm Motor power: 110 kW, without gearbox Rotor flight circle: 380 mm Rotor speed: approx. 470 rpm Cutting system: 66 cutting inserts on toolholder Screen: reinforced screencage, 15 mm perforation Counter knife: with mechanical adjustment device Machine weight: approx. 5.900 kg Hfodjbq Stqepfx Afnec

Condition: good (used), Year of construction: 2016, machine/vehicle number: PRJ052353, Offer 25490 Technical Data: Hfodpsxy Hp Ajfx Afnsc - Drilling capacity in steel ST 60: 40 mm - Drilling performance in steel ST 60: 50 mm - Drill spindle taper: MK 4 - Drill spindle stroke: 160 mm - Digital speed display - Throat depth: 300 mm - Swivel table with vice: 440 x 440 mm - Column diameter: 145 mm - Electromagnetic feeds: 0.1 – 0.2 – 0.3 – 0.4 mm/rev - Infinitely variable drill spindle speeds with digital readout: 200 – 3200 rpm - Drive: 400 V / 1.8 / 2.9 kW - Lighting - Electrical foot switch - Required space (approx.): W 650 x H 1900 x D 800 mm - Weight (approx.): 470 kg

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1845/455, Completely refurbished: Mechanics, geometry, hydraulics, and electrical components Wheelhead Disassembly, cleaning of parts, replacement of worn and defective components, motor overhaul, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings, plus adjustment. New paintwork. Workhead Disassembly, cleaning of parts, replacement of worn and defective components, motor replacement, replacement of belts. New spindle bearings. New paintwork. Tailstock Disassembly, cleaning of parts, replacement of worn and defective components, motor replacement, replacement of belts. New spindle bearings. New paintwork. Internal grinding attachment Disassembly, cleaning of parts, replacement of worn and defective components, installation of the support and geometry alignment. New paintwork. Hydraulics Disassembly, motor replacement, hose replacement, defective and worn parts replaced. Hydraulic block checked. X-Axis Disassembly, replacement of worn items such as O-rings, seals, rings, etc., overhaul of hydraulic piston, regrinding of tables. Z-Axis Disassembly, regrinding of tables, replacement of worn and defective parts, overhaul of hydraulic piston, scraping of V and flat guides. New paintwork. Measuring system Digital 2-axis display included. Hfodpfx Afsxt Ilfenjc Electrical cabinet Replacement of motor contactors and relay controls. New wiring. New variable speed drive (frequency inverter) for the workhead. TECHNICAL SPECIFICATIONS Distance between centers: 1500 mm Distance between centers (workhead to tailstock overhang): 1650 mm Center height, standard: 125 mm Center height with riser blocks: 225/250 mm Maximum grinding diameter: Ø 250 mm Maximum grinding diameter with riser blocks: 450/500 mm Table Usable surface: 2060 x 140 mm Max. length and width for surface grinding: 1750 x 200 mm Longitudinal travel, manual or hydraulic: 1750 mm Manual table movement, 1 handwheel revolution – coarse: 20.006 mm Manual table movement, 1 handwheel revolution – fine: 2.457 mm Table speed, continuously via hydraulics: up to 6 m/min Table swivelling: 6° Stop and return: 0–5 sec. Workspindle Workpiece speeds, continuously variable (electric): 20–400 rpm Swivelling: 360° Workspindle taper (internal): MT5 Tailstock Internal taper, tailstock spindle: MT3 Spindle retraction, manual or hydraulic: 30 mm Diamond dresser taper (internal): MT0 Universal grinding head Cross slide travel for wheel: 285 mm Rapid traverse for wheel slide, front and rear: 40 mm Grinding spindle speeds: 1500 – 1700 – 2200 – 3600 rpm Vertical grinding spindle movement, center heights: 125–330 mm Max. wheel for cylindrical grinding: 400 x 50 x 127 mm Max. wheel for surface grinding: 250 x 20 x 76 mm Head swivelling with locking at every 90°: 270° Wheel feed 1 division of the micrometer drum: 0.005 mm/Ø Automatic wheel feed, max.: 0.9 mm/Ø Motors Grinding spindle motor: 2,900 rpm / 4.0 hp Workspindle motor: 3,000 rpm / 2.0 hp Coolant pump motor: 2,850 rpm / 0.12 hp Internal grinding attachment Bore: 70 mm Internal grinding spindle speed Ø70 mm: 14,000 rpm Internal grinding spindle speed Ø50 mm: 21,000 rpm Subject to error or omission, the technical information is provided without obligation.