Milling machine / DECKEL FP 1 - 3-axis active

DECKEL FP 1 3 - Achs Aktiv Digital

Condition: new, pressure 1,5 kN stroke 40 mm throat 70 mm Working height from to 75 - 170 mm table surface area 115 x 70 mm weight of the machine ca. 11 Kg dimensions 115 x 175 x 290 mm Dcjdsfv Av Djpfx Ag Djf Hand presses with rack HZ 150 The power is transmitted via a rack and pinion construction. she finds their use where during the working process a constant pressure is needed. Precisely manufactured, spindle hardened and ground, unlimited service life Long spindle guide, optimal pressure performance, T-slot according to DIN 650 milled in the middle, sliding blocks fit exactly.

Condition: excellent (used), Deckel FP1 AKTIV (3-Axis Active) Machine no.: 2102-3240 Year of manufacture: approx. 1988 Travel paths: X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 – S20x2 Dodpfjyll A Tex Ag Djcf Spindle speed: 40–2,000 rpm Motor power: 1.6 and 2 kW Power supply: 380 V, 50 Hz Equipment/Accessories: - Active digital readout, 3 axes, HEIDENHAIN type TNC 113 - Infinitely variable feed in X, Y, and Z axes - Vertical milling head quill travel: 60 mm - Vertical milling head swivels and extends 100 mm horizontally - Coolant system (coolant tank in machine base) - Documentation - Central lubrication system - Machine vice - Various toolholders/collets/tools Space required (L x W x H): 1,350 x 1,100 x 1,700 mm Weight: 850 kg The machine has been visually reconditioned and technically inspected. Geometry inspection videos can be provided upon request. Backlash Y axis: 0.1 mm Backlash X axis: 0.2 mm Backlash Z axis: 0.15 mm Runout horizontal spindle: 0.001 mm Runout vertical spindle: 0.001 mm Parallelism deviation Y axis: 0.002 mm (measurement path: 150 mm) Parallelism deviation X axis: 0.01 mm (measurement path: 300 mm) Geometry inspection videos can be provided upon request. The following parts have been renewed: - Gears in horizontal head replaced and gear shaft newly mounted - New guide cover for Z axis + various attached parts - Machine refurbished - New LEDs installed - Y-axis chain tensioner overhauled - Reference point programming checked - Function test carried out

Condition: used, Year of construction: 1983, Technical details: throat: 315 mm throat in width: 310 mm throat in - height: 230 mm saw band length: 2530 - 2650 mm saw band width: 13 mm band speed: 12 - 750 m/min Table dimensions: 500 x 500 mm table height over floor: 950 mm total power requirement: 1,3 kW machine weight approx.: 450 kg dimension machine xH: 0,8 x 0,7 x 1,65 m Dcodpfx Ageva E E Te Djf Steel and metal band saw Filing band length 2550 mm Additional equipment: Saw band processing Ideal -> saw band cutting device-saw band welding device-saw band grinding device Cooling via spray feeder Foot control Accessories -div. saw bands -1x running wheel Ø 320 mm -Saw band by the meter RRR Roentgen *

Condition: excellent (used), Deckel FP1 Tool Milling Machine with New Digital Readout (3-Axis) Machine No. 55192-08 Travel paths: X 300 mm Y 150 mm Z 340 mm Spindle speed 40-2000 rpm Feed rate 10 to 500 mm/min Fixed angle table 600 x 210 mm, max. load 200 kg Quill vertical travel 60 mm SK40 with DECKEL saw thread S20 x 2 Vertical and horizontal spindle Milling head manually swivels (+/- 90°) Equipment/Accessories: - As-new machine table - New 3-axis digital readout - Machine vice - New spindle nut X-axis - New SK40 inner spindle - Control cabinet retrofitted with new main switch - Coolant system with new hoses - Chip tray - Emergency stop The machine has been technically inspected and is in excellent working condition. Backlash X-axis 0.05 mm Backlash Y-axis 0.2 mm Backlash Z-axis 0.4 mm Dcedoyn Iphspfx Ag Def Net price ex works, loaded from stock

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and infinitely variable feed very good CONDITION Technical data: >> Year of construction 1990 Machine no. 2102-5046 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes Djdpfou Um Erox Ag Decf >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC113 >> Electrical central lubrication >> Coolant device >> Operating instructions, spare parts plan Gojs3G About the machine : Universal milling machine Deckel FP1 built in 1990 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this little gem under power on site.

Condition: used, TECHNICAL DETAILS - Force : 5 [kN] - Working stroke : 35 [mm] - Spindle height : 400 [mm] Djdpouhallefx Ag Djcf - Slide bore diameter : ø 10H7 [mm] - Angle : 95 [°] - Max. tool weight : 15/30 [N] - Table dimension : 110 x 80 [mm]

Condition: ready for operation (used), Mössner Rekord SM / 320 Vertical Metal Bandsaw Throat depth: 310 mm Wheel diameter: 320 mm Maximum workpiece height: 200 mm Working height: 950 mm Cutting speed: 12 - 750 m/min. Power supply: 380 Volt, 50 Hz 4 gearbox speeds Space requirement approx. 800 mm x 770 mm x 1700 mm (L x W x H) Dsdpfewty Dpsx Ag Decf Weight approx. 560 kg Band welding unit: Ideal Table: 500 mm x 500 mm You are welcome to visit for an inspection. We can arrange cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided a valid VAT ID is supplied. Subject to prior sale. Visit our shop and discover our other offers as well. Named company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data and errors in the article description are possible and subject to change.

Condition: good (used), Year of construction: 1985, Taxed according to the differential taxation scheme under §25a of the German Value Added Tax Act. You will receive a proper invoice. Internal item no.: 26006 Dedpfx Agoygv Ups Docf You are welcome to inspect the machine under power in our heated warehouse area of over 500m². Universal milling machine Deckel FP1 (3-axis active digital) Year of manufacture: 1985 Travel distances: X300 / Y160 / Z340 mm Quill stroke: 60mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed: infinitely variable 5-500 mm/min The control system works perfectly, but the LEDs are defective! + Hydraulic machine vice Röhm BB110 The machine comes from an educational institution and is in well-maintained condition.

Condition: good (used), Year of construction: 1985, Deckel FP1 Aktiv with 3-axis Heidenhain digital readout, 3 active axes, rigid table, SK 40 M16 spindle taper. Central lubrication, operating manuals included. Good operational condition, comes from a vocational training center. Can be demonstrated under power by arrangement. Dcsdpfxsxwunzj Ag Def

Condition: ready for operation (used), Mössner Rekord SM / 420 Vertical Band Saw for Metal Throat depth: 410 mm Wheel diameter: 420 mm Maximum workpiece height: 265 mm Saw band length: 3160 mm – 3260 mm Working height: 1000 mm 4 gearbox speeds Space required: approx. 920 mm x 740 mm x 1815 mm (L x W x H) Weight: approx. 560 kg Band welding unit: Ideal You are welcome to come and inspect the machine. We can arrange cost-effective shipping for you! Dedpfxeyh Uyqs Ag Decf You will receive a proper invoice. For foreign customers, a net invoice can be issued, provided a valid VAT identification number is supplied. Subject to prior sale. Visit our shop and take a look at our other offers as well. All company names and trademarks mentioned are the property of their respective owners and are used only for identification and product description purposes. Deviation from technical data or errors in the description of the item may occur and are reserved.