Sewing Machine

Dürkopp Adler/CSTA/Pfaff

Year of construction: 1996, condition: good (used), machine/vehicle number: 96.01112.1496, Stationary high pressure pump unit Hammelmann HDP 112 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 112 Working pressure: 300 bar Delivery rate: 153 l/min. Drive speed: 1500 rpm. Drive power: 90 kW with VEM motor 90 kW 3~motor, IP55, with pressure regulating valve, with safety valve, with oil cooling system. dimensions LxWxH: ca. 2300x1000x1400 mm weight: approx. 1500 kg Year of manufacture: 1996 Condition: in good used condition. Rodpshtnnisfx Aa Eol

Condition: ready for operation (used), Year of construction: 2010, Working height: 900mm (+/-50mm), max. roll weight: 70kg, max. roll width: 3200mm, cutting width: 3900mm/5000mm, cutting length: 5000mm, cutting speed: 1m/s, machine dimensions X/Y: approx. 7000mm/4500mm. Documentation available. On-site inspection is possible. Rsdpev Ifvzjfx Aa Esl

Condition: ready for operation (used), Year of construction: 2025, A twin-needle lockstitch flatbed sewing machine Dürrkopp Adler is available. Stitch spacing: approx. 19mm, bobbin diameter: 32mm, sewing speed: 3400 stitches/min, machine dimensions X/Y/Z: approx. 1100mm/500mm/1700mm, weight: approx. 60kg. The machine is almost unused. Documentation available. An on-site inspection is possible. Rodpfx Aasw Na Ire Esl

Condition: used, machine/vehicle number: 8170126, Langarm-Drahtheftmaschine / Long arm Wire Stitching Machine Polygraph 781Kartonagenhefter / Carton Stitcher Typ / Model 781/1L75FR Serial-No. 8170126 Armlänge / Arm length 75cm Fußpedal / Foot pedal Rjdoiiilqepfx Aa Esl Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: new, axle configuration: > 3 axles, suspension: hydraulics, tire size: 215/75R17.5, color: red, Year of construction: 2024, Color: Red Rjdpeux A Hvjfx Aa Ejl Wheelbase: 150 cm. Load capacity: 443,800 kg. Loading floor height: 100 cm. Expandable Braked Goldhofer THP SL 10 (6+4) Manufacturer: Goldhofer Type: THP SL6 & THP SL4 Year: New/Unused Chassis numbers: WG0THPS69R0043538, WG0THPS49R0043537 Details THP SL 6 Maximum axle load: 45,000 kg per axle Total axle load: 6 x 45,000 kg = 270,000 kg GVW: 270,000 kg Empty weight: 20,750 kg Loading capacity: 249,250 kg Total length: 13,250 mm Loading floor width: 3,000 mm Height: 1,175mm. (+/- 300) Details THP SL 4 Maximum axle load: 45,000 kg per axle Total axle load: 4x 45,000 kg = 180,000 kg GVW: 180,000 kg Empty weight: 13,850 kg Loading capacity: 166,150 kg Total length: 10,250 mm Loading floor width: 3,000 mm Height: 1,175mm. (+/- 300) Goldhofer SH 35/2 Universal Gooseneck + PPU Manufacturer: Goldhofer Type: SH 35/2 Universal Gooseneck Year: New and unused Chassis number: WG0SH000XR2043537 Main features Gooseneck Loading platform: 3,700mm x 2,440mm 3.5 inch king pin Hydraulic lifting and lowering Hydraulic supporting cylinders Coupling height: 1,450 mm Integrated lashing coupling Lashing all around Spare wheel + Spare wheel carrier Hydraulic locking pin Auto lube for gooseneck with pump, Beka-MAX Main features Hatz Diesel PPU Hatz 1 Cylinder Diesel Engine (silent pack) @ 9.6 kW 240 liter hydraulic oil capacity powder coated tank Capacity of 35 l/m and 250 bar max working pressure 3x different quick connector sizes for pressure connection 3x different quick connector sizes for tank connection Electric RPM control General Information Year of manufacture: 2024 Axle configuration Tire size: 215/75R17.5 Axle brand: BPW ECO PLUS Suspension: hydraulic suspension Front axle 1: Twin tires; Lift axle; Max. axle load: 45,000 kg; Steered; Tire profile left inner: 100%; Tire profile left outer: 100%; Tire profile right inner: 100%; Tire profile right outer: 100% Front axle 2: Twin tires; Lift axle; Max. axle load: 45,000 kg; Steered; Tire profile left inner: 100%; Tire profile left outer: 100%; Tire profile right inner: 100% Tire profile on the right outermost side: 100% Front axle 3: Dual tires; Lift axle; Max. axle load: 45,000 kg; Steered; Tire profile on the left inner side: 100%; Tire profile on the left outer side: 100%; Tire profile on the right inner side: 100%; Tire profile on the right outer side: 100% Front axle 4: Dual tires; Lift axle; Max. axle load: 45,000 kg; Steered; Tire profile on the left inner side: 100%; Tire profile on the left outer side: 100%; Tire profile on the right outer side: 100% Rear axle 1: Dual tires; Lift axle; Max. axle load: 45,000 kg; Steered; Tire profile on the left inner side: 100%; Tire profile on the left outer side: 100%; Tire profile on the right inner side: 100% Tire profile on the right outermost side: 100% Rear axle 2: Dual tires; Lift axle; Max. axle load: 45,000 kg; Steered; Tire profile on the left inner side: 100%; Tire profile on the left outer side: 100%; Tire profile on the right inner side: 100%; Tire profile on the right outer side: 100% Rear axle 3: Dual tires; Lift axle; Max. axle load: 45,000 kg; Steered; Tire profile on the left inner side: 100%; Tire profile on the left outer side: 100%; Tire profile on the right inner side: 100%; Tire profile...

Condition: ready for operation (used), Year of construction: 2017, A total of 5 sewing machines from various manufacturers are available. 1) Brother LS2-B837. 2) Adler K767 990001. 3) Mauser MA335-G-6/01-BLN. 4) Brother KE-430 FX-05, year of manufacture: 2017, needle: 135x172 Nm110. 5) Dürkopp Adler. On-site inspection is possible. Rodpswv Ulyefx Aa Ejl

Condition: excellent (used), Durkopp Adler 767 20 pcs in stock / many models Rodpfjv Nphdsx Aa Eol Can be used on both 220V and 330V

Condition: new, functionality: fully functional, Fervi T047/400VDA Gear-Driven Milling and Drilling Machine with Tapping 400V 1.5kW BRAND NEW “CE” CERTIFIED Promo price – single unit available while stocks last. The machine can be used for: Milling Drilling Tapping Drilling capacity in cast iron (with pilot hole): ø 40 mm Max drilling capacity in steel (with pilot hole): ø 32 mm Milling capacity with indexable cutter: ø 80 mm Milling capacity: ø 25 mm Tapping capacity: Ø 22 mm Taper: MT 4 Quill stroke: 130 mm Quill diameter: ø 76 mm Column diameter: ø 115 mm Head tilt: ± 60° Spindle speed: (12) 75 ÷ 3200 rpm Three-phase motor: 400 V 50 Hz 1.1 – 1.5 kW Table dimensions: 585 x 190 mm T-slot: 12 mm Base dimensions: 648 x 412 mm Overall dimensions: 740 x 790 x 1960h mm Weight: 390 kg. Rodpfx Aeg Npiwea Ejl

Condition: new, turning diameter over bed 410 mm turning diameter over slide rest 240 mm turning length 1000 mm turning diameter in the gap 530 mm turning speeds 65 - 1810 U/min centre height 205 mm spindle bore 52 mm tailstock quill taper MT 4 total power requirement 2,2 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 1,9 x 0,8 x 1,3 m Center lathe with: 3-axis digital measuring system fully assembled electromagnetic main spindle brake auto. Feed in longitudinal and transverse direction safety relay Micrometer end stop coolant device 3-jaw lathe chuck with 1 set of turning and drilling jaws Rsdsm Rlb Nopfx Aa Esl German operating instructions.

Condition: used, Pillar drilling machines Rsdpfeb N Ezrox Aa Ejl