Box table Correa Anayak

Correa Anayak Correa Anayak

Condition: excellent (used), Year of construction: 2001, overall weight: 10,000 kg, total length: 5,000 mm, total width: 900 mm, total height: 900 mm, Box table Correa Anayak MACH-ID 9393 Make: Correa Anayak Year: 2001 Cast iron contsruction 2 matching units availebel clean surface Number of T slots: 7 Jump from T to T: 130mm Bdodpszcn E Sofx Aa Ioh T size: 22mm Number of T-slotted sides:1 Length: 5000mm Width: 900mm Height: 900mm Weight: 10000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), functionality: fully functional, turning length: 5,200 mm, turning diameter over cross slide: 940 mm, turning diameter: 900 mm, spindle bore: 204 mm, torque: 3,000 Nm, bar passage: 204 mm, total height: 3,600 mm, total length: 10,820 mm, total width: 3,381 mm, collet bore: 450 mm, spindle nose: ASA 15, overall weight: 39,000 kg, MULTITASKING Siemens 840 CNC retrofit in 2018 Diameter on the bench 940 mm Turning diameter over the entire length 900 mm Distance between centers 5200 mm Tilting milling head + - 90° Torque 3000 Nm Axial force 60 Kn Turning head Chain tool change 48-place HSK 100° Spindle taper ASA 15 Bar passaging 204 mm Tailstock CM6 Tailstock diameter 195 mm Tailstock stroke 285 mm Automatic rest Autoblock 50-450 Chip conveyor Dimensions: 10820 x 3381 x 3600 mm Bdedpfx Aeryvxhsa Ieh Weight 39.000 kg USED MACHINE

Condition: new, sweeping width 1750 mm weight of the machine ca. 300 kg dimensions of the machine ca. 2100 x 1450 x 1000 mm Sweeper for forklifts, wheel loaders, Hoftrac, working width 1750 mm, dirt collection tray 250 liters, with level compensation and front support wheel, PPN sweeping roller 520 mm diameter, splash guard, dirt collection tray with hydraulic emptying, mechanical tilt adjustment, height-adjustable support wheels with metal rims, Bjdpfju H N Tlox Aa Iodh hydraulic drive, hoses, and couplings. Extra bearing on hydraulic motor, drive pockets W/H: 200x70 mm. - Made in Germany

Condition: used, Year of construction: 2013, Technical details: faceplate diameter: 800 mm power requirement: 110 kW weight of the machine ca.: 37.000 / total 52.000 t Bedpfx Aasuyp Eno Iodh transport measurements machine: 5,07 x 2,98 x 3,90 m clamping diameter: 800 mm : Ø 800 x 720 mm Tool bore: Capto C6 tools in tool magazin: 2 x 80 With C-Axis *

Condition: used, Year of construction: 1991, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 1991 Control : Siemens 840 Dsl Turning diam. : 1600 mm Turning length : 1800 mm In General: Year of manufacture:1991 / 2010 Control system retrofit:2010 Control system:Siemens 840 Dsl Circumferential diameter:2,000 mm Bjdpfx Aey R Iwxsa Iodh Turning diameter:1,600 mm Turning height:1,800 mm Table / Faceplate: Technology:Gear-driven table Speed:315 rpm Power:105 kW Max. torque:50,000 Nm Faceplate:1,600 mm Max. table load:12,000 kg Tool carrier: Crossbeam travel (vertical):1,200 mm Chisel slide travel:1,500 mm Support travel (horizontal):2,300 (+/-1,150) mm Penetration diameter:340 mm Chisel slide cross-section:240 x 240 mm Equipment: Tool magazine:20 stations Chip removal:Chip conveyor Coolant supply:Coolant system with filter Tool measurement:Probe Set-up:Electronic handwheel Tool holders:Various tool holders Control system overhaul: Year of overhauling:2010 Technology:Siemens 840 Dsl NC control:Sinumerik NCU 710.2 Motors:X/Z-axis, ATC, :spindle Measuring systems:Direct scales X/Z, ROD encoder table Control panels:Machine control panel, ATC operator panel

Condition: used, Year of construction: 2006, load capacity: 22,000 kg, lifting height: 3,860 mm, total length: 5,855 mm, Diesel forklift Paus PGS 22 Drive Diesel Year built 2006 Bodjyu Uyyjpfx Aa Isdh Lifting height (mm) 3,860 Lifting weight (kg) 22,000

Condition: used, 4 INGERSOLL adjustable chuck jaws for face plate Chuck jaws for lathe chuck, mechanical clamping device, clamping block No: 39.02.10000 / 501.397 Jaw width 70 mm Jaw length 180 mm Jaw carrier height 150 mm Base plate 325 x 265 mm - Stepped jaws for turning as turning and drilling jaws - Jaw adjustment via trapezoidal threaded spindle Bsdpsu Axzkefx Aa Isdh - Jaw carrier with 6 recesses 40 x 30 mm for fastening - Distance between recesses 280 x 133 and 220 x 90 mm (centered) Dimensions L x W x H 325 x 265 x 215 mm Weight per jaw 36.5 kg Weight of all 4 jaws 146 kg Good condition

Condition: like new (used), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, warranty duration: 3 months, type of input current: AC, overall weight: 14 kg, input voltage: 230 V, repeat accuracy: 0.025 mm, Equipment: documentation/manual, lighting, type plate available, AT960 SR Laser tracker with All accessories and T Probe as good as new Bdodoz D D Tqspfx Aa Ijh

Year of construction: 2022, condition: ready for operation (used), This KEYENCE WM 3000 was manufactured in 2022. A reliable CMM machine, it offers precise dimensional measurement and quality control. Ideal for industries requiring high accuracy in component inspection. Contact us for more information about this machine. • Max. measuring length (W × D × H): 10,000 mm × 3,500 mm × 5,000 mm • Certified measuring range (W × D × H): 3,000 mm × 1,500 mm × 1,500 mm • Measurement accuracy: ±(28 + 5 L/1000) μm* • Repeatability: ±10 µm • Minimum display unit: Distance: 0.001 mm, Angle: 0.001° • Rotation angle of the measuring head: Horizontal ±90°, Vertical ±30° • External input 2 voltage-free inputs • Communication • Bluetooth communication Bluetooth 5 • USB communication USB 3.0 • Infrared communication 945 nm • Power supply: Powered via supplied mains adapter • Rated voltage: 24 V DC • Current consumption: 1.7 A • Environmental conditions: Operating ambient temperature +10°C to +35°C • Operating relative humidity: 20 to 80% (non-condensing) • External dimensions: 327.7 mm × 250.9 mm × 357.3 mm Additional equipment • Measuring Head WM 3000 • USB Cable • Power Supply • Measuring Probe WMP3000 • Probe Tip Ø 5 mm • Calibration Device • Tripod • 3D-CAD Add-on Software • Transport Case • 4x Batteries for Measuring Probe Machine Benefits Technical Machine Benefits Bjdpfxox D Sdae Aa Iodh • Battery charger • Dongle for measuring software Extra Information Machine still under power

Condition: good (used), Year of construction: 2020, Various tools and tool holders. Many Wohlhaupter and other brands. Many of these have never been used. See pictures. Bdedszycr Hjpfx Aa Ioh For sale as a package only.