Mortiser

cabe 170ST

Condition: used, Year of construction: 1995, cutting diameter 280 mm saw band length 4200 mm cutting width 280 x 280 mm dimensions of saw-band 4200 x 34 x 1,1 mm cutting speed 18 - 115 m/min multiple feeding 0 - 6000 mm power capacity 3,0 kW voltage 400 V total power requirement 5,0 kW weight of the machine ca. 2,3 t dimensions of the machine ca. 2,35 x 2,40 x 2,00 m - serial-no.: 6082 - control: SIEMENS COROS - OP 15 Ibjdpfxjp Rai Ej Ah Hed - chip conveyor - multiple feeding - coolant equipment

Condition: new, Technical data: Drilling capacity in steel: 50 mm Tapping capacity: M33 face milling cutter: 100 mm Ijdpspxmlqefx Ah Hsbd end mill: 25 mm spindle: MK 4 throat depth: 340 mm Speeds: (6) 50 - 1510 1/min quill stroke: 200 mm quill feed: 0,1 / 0,2 / 0,3 / 0,4 mm/rev table size: 820 x 240 mm traverse path X: 460 mm traverse path Y: 280 mm column diameter: 180 mm Number of T-slots: 4 T-slot size: 16 x 26 mm motor power: 3 kW Weight, approx.: 750 kg Equipment: - Cross table - thread tightening spindle - Thread cutting device - Automatic spindle feed - LED machine light - Rotatable table - Manual fine feed - Coolant device - Height adjustable protective cover - Limit switch protected spindle

Condition: used, Year of construction: 1996, spindle diameter 60 mm x-travel max. 1000 - min. 100 mm y-travel max. 1000 - min. 100 mm bore capacity in steel max. 40 mm thread capacity max. M24 Thickness max. 60 - min. 5 mm spindle turning speed - stepless einstellbar 1 - 1.000 U/min feed stepless einstellbar, Eilgang 1 - mm/min feed stepless einstellbar, Arbeitsgang mm/min feed power 16 KN tool taper SK 40 spindle stroke 600 mm positioning speed in allen Achsen 1 - 10.00 mm/min positioning accuracy auf 300 mm = +/- 0,01 mm table load max. 500 kg work height max. 1000 mm weight of the machine ca. 4,8 t dimensions of the machine ca. 3,5 x 3,3 x 3,1 m Ibsdegvkkzjpfx Ah Hjd Control Bosch CNC plate drilling system HMB PBM1000/60 - W12 for drilling head plates and Base plates in steel construction with tool changer (12x) Number of drilling spindles: 1 pc. Operating Voltage: 220/380V Frequency: 50 Hz Total connection value: 22 kVA

Condition: excellent (used), turning diameter over bed 280 mm Ibsdewngkxjpfx Ah Hod turning diameter over slide rest 160 mm turning length 500 mm centre height 140 mm centre distance 500 mm spindle bore 36 mm spindle turning speed range 15 - 3550 U/min spindle head DIN 55022 Gr. 5 feeds - longitudinal 0,008 - 0,560 mm/U feeds - cross 0,004 - 0,280 mm/U thread - mm pitch 0,2 - 12 mm dia. of leadscrew 24 mm lead of leadscrew 6 mm tailstock taper MT 3 tailstock quill stroke 90 mm tailstock adjustment out of the central pos. 15 mm total power requirement 2,2 kW weight of the machine ca. 0,6 t dimensions of machine L x W x H 1,40 x 0,70 x 1,20 m - machine out of teaching shop - Accessories: DRO on 3 axis, 3-jaw chuck RÖHM 160 mmø, MULTIFIX-head A, running center

Condition: used, Year of construction: 1987, functionality: unexamined, machine/vehicle number: F310Y, total height: 3,210 mm, total length: 4,640 mm, total width: 3,340 mm, Technical details: - Spindle diameter (axially fixed): 120mm - Variable spindle speeds: Range 1 - 10 to 465 RPM, Range 2 - 45 to 2150 RPM - Nominal power at the spindle: 8kW (temporary overload permissible up to 11kW) - Nominal torque at the spindle: 98 kpm (temporary overload permissible up to 134kmp) - Max absorbed power: 25kW - Dimensions of the standard tableL 840 x 1000mm - Max recommended load: 1200kg - Table rotation in both directions: continious through 360 degrees - Transverse stroke of the table (X axis): 900 (+20) mm - Longitudinal stroke of the table (Z axis): standard Z - 760 (+20)mm, increased Z - 975mm (+20 outside the graduation) - Min.and max. distance spindle flange/table centre (without spindle adaptor): standard Z - 430/1190 (+20)mm, increased Z - 455/1430 mm (+20 outside the graduation) - Vertical stroke of the headstock (Y axis), min. and max. height of the spindle axis above the table: standard Y - 50-710 (+20)mm, increased Y - 50-960 (+20)mm - Hydraulic infinitely variable working feeds in manual mode - 6 to 630mm/min - Rapid traverse - 6m/min - Precision of optical reading: linear axes - 0,001mm, manual rotary axis - 1 sec.arc Ijdjun Siwepfx Ah Hjbd - Positioning accuracy refered to built-in master scales +/- 0.0015mm; +/- 2 sec.arc - Weight of the machine: 12 t Extras: Includes various tool holders, rotating table, user manuals

Condition: new, Year of construction: 2025, The CORMAK HBS260 band saw for cutting pipes, profiles and bars is widely used in all locksmith workshops where precision, quality and cutting speed are important. The model is equipped with a 0-60° swiveling arm. The frame design ensures accurate and quiet operation. It has a removable filing tray for easy cleaning! Machine characteristics A horizontal metal band cutter with a swiveling arm allows cutting in a plane perpendicular to the axis of the material being cut and at any angle ranging from 0 to 60°. The material to be cut can be fed manually or with any mechanical device, and the tool feed is automatic. The tape guides are equipped with special carbide plates and bearings. This has a huge impact on the belt guidance, its life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and saw blade. The machine is equipped with an efficient cooling pump with a closed coolant circuit. The cutter's arm made of uniform cast iron together with the 27 mm wide cutting band used in this cutter allows it to fully perform multi-series cuts of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The saw blade guides are equipped with hard metal plates - sintered carbides and a rolling bearing system. It is the CENTRED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The shape of the upper part of the base constitutes a bathtub for draining coolant and catching chips generated while cutting the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the movement of the cutting band and the falling feed of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic actuator. The feed speed is regulated on the cutter's control panel. We can choose from two cutting band speeds: 35 and 70 m/min. In the lower position of the arm (after cutting the material), the cutting belt drive is turned off automatically. Safety is ensured by the cutting band covers and micro switches that stop the engine after the cutting cycle is completed or any of the covers are opened. Additional protection consists in automatic shutdown of the cutter in the event of the cutting band breaking. Cutting band size [mm] 2500 x 27 x 0.9 Tape tension mechanical (manual) Belt speeds [m/min] 35, 70 Adjustable arm drop stepless - hydraulic actuator Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame tilt [°] 0-60 Power supply 3 phases 400V Main engine power [kW] 1.1/1.5 Cooling pump motor power [kW] 0.05 Dimensions with base [cm] 150x80x140 Weight [kg] gross/net - 210 / 180 kg *Please note that machine is sold without CEE connector by default, since there are many different types of it. If you would like to receive it with the machine, please write it to the seller before making a purchase/during order proceeding. Isdpfsmrnk Esx Ah Hsbd The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, WMD45A ROGI Drill Cutter VERY COMPLETE MACHINE Drilling capacity ----- 45 mm Spot milling capacity ----- 80 mm Finger milling capacity ----- 32 mm Dimensions of the work table ----- 800 x 240 mm Dimensions of the T-slots ----- 14 mm Spindle mounting ----- ISO30 Maximum distance spindle - table ----- 460 mm Spindle stroke ----- 120 mm Head tilt ----- Left / Right 90 Degrees Longitudinal displacement ----- 560 mm Cross travel ----- 230 mm Speed range 75 - 3200 rpm Weight ----- 580 KG Motor ----- 1.1 KW Voltage ----- 400V-3PH Isdpfx Aega Tyzjh Hobd INCLUDED * 3-axis digital readout brand SINO * Automatic longitudinal feed worktable * Drill head with ISO30-B16 shank * Left / Right switch * Spindle protection * Fine adjustment * 2 Speed motor * Driven wedge * LED work light * Cooling system * Tap function * Digital depth stop * Milling head motorized height adjustable * Various tools in suitcase

Condition: used, Year of construction: 1973, machine/vehicle number: 20591, roll diameter:500 mm throat:1050 mm workpiece height:400 mm volt:400 V Iodpfx Aocxxr Ejh Hebd table-size:750 x 800 mm total power requirement:5,5 kW weight of the machine ca.:1,5 t dimensions of the machine ca.:2,4 x 1,0 x 2,2 m stable cast stand construction, cutting speed adjustable via manual gearbox and variator, band tensioning device, tilting work table +/-40°, rear add. table, various saw band guides, grinding device, work light, foot pedal

Condition: as good as new (ex-display), Year of construction: 2024, machine/vehicle number: fortlaufend, Height: 200 mm Centers: 1000 mm Turning diameter over bed: 400 mm Turning diameter over support 220 mm Spindle Bore: 52 mm Speed ​​range: 9-1600 rpm Spindle nose: Bayonet DIN 5027 KK 6 Longitudinal feeds range: 0.028 to 6.43 mm / rev (93 steps) Area cross feeds: 0.012 -2.73 mm / rev (93 steps) Metric threads: 0.5 - 224 (48 steps) Inch threads: 72 - 1 / 8 tpi (46 steps) Ibedpfxj Nh Hxo Ah Hod Module pitch: 0.5 - 112 (42 steps) Diametral thread: 56 - 1 / 4 DP Quill diameter: 75 mm Spindle stroke: 150 mm Taper: Morse taper 5 Motor power: 7.5 kW Weight: 2100 kg Dimensions: 2672 x 975 x 1230 mm Accessories: Digital display for 3-axis mark SINO, 3-jaw chuck Ø 250 mm, 4-jaw faceplate chuck Ø 400 mm, fixed + follow rest, coolant system, fire wall, rapid, manual lubrication, 4-way tool operating light.

Condition: new, functionality: fully functional, machine/vehicle number: RM310119, feed length X-axis: 787 mm, feed length Y-axis: 508 mm, feed length Z-axis: 584 mm, quill diameter: 105 mm, table width: 355 mm, table length: 1,372 mm, type of input current: three-phase, rotational speed (max.): 5,000 rpm, rotational speed (min.): 40 rpm, table load: 600 kg, overall weight: 2,390 kg, input voltage: 400 V, workpiece weight (max.): 600 kg, warranty duration: 12 months, input current: 22 A, input frequency: 50 Hz, Built-in programming cycles: Position: Spindle positioning Drilling: Simple holes, holes on a circle Milled holes: Holes made by milling cutter – straight and circular Arcs: Arcs in XY, XZ, and YZ plane Pockets: Rectangular, circular, irregular Island: Milling rectangular, circular, and irregular islands Profile: Rectangular, circular, irregular Helix: Spiral ramping Milling: Straight lines along X, Y, or Z axis or any combination Engraving: Text engraving Thread cutting: Thread cutting with tap Thread milling: Thread milling with form cutters Copying: Copying a series of cycles Mirror: Mirror image Rotation: Rotation around an axis Repetition: Repetition of a series of cycles G-code editor Ibedpfewtnxnsx Ah Hsd Clipboard