Bystronic Bystar 3015 fiber laser

Bystronic 3015

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, operating hours: 1,990 h, laser power: 12,000 W, sheet thickness steel (max.): 30 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,580 mm, travel distance Z-axis: 100 mm, Bystronic ByStar Fiber 3015 Dynamic Edition F12000 from year of manufacture 2023 with only 1,990 cutting hours! Original purchase price of the machine was approximately 870,000 EUR! TECHNICAL DETAILS Travel X-axis travel: 3,100 mm Y-axis travel: 1,580 mm Z-axis travel: 100 mm Maximum Sheet Thicknesses Steel: 30 mm Stainless steel: 30 mm Aluminum: 30 mm Brass: 15 mm Copper: 12 mm Positioning Speed Maximum positioning speed (X/Y axis): 120 m/min Maximum simultaneous positioning speed: 170 m/min Positioning Accuracy Bilateral repeatability of axis R: 0.025 mm Average bilateral positioning deviation of axis M: 0.05 mm Edge detection accuracy: ± 0.5 mm Workpiece Weight Maximum single workpiece weight: 1,100 kg Maximum workpiece weight on both shuttle tables: 1,850 kg Changeover Time Shuttle table change time: 25 s MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 12,150 x 6,000 x 3,200 mm Machine weight: 11,000 kg Laser Source Laser source: Fiber 12000 Power: 12,000 W Adjustable range: 1,200–12,000 W Wavelength: fiber Consumption Total power consumption (incl. exhaust, chiller): 27 kW Operating Hours Cutting hours: 1,990 h Iedsxxklfspfx Ag Dja Power-on hours: 13,428 h EQUIPMENT Detection Eye BeamShaper NCT & KerfScan Second high-pressure cutting gas channel Prepared for N2 generator Dust extraction system for internal installation Electrical cabinet position: top (mezzanine structure not included in scope of delivery) Note: The machine has already been dismantled, is stored, and is no longer under power.

Condition: not inspected (used), Year of construction: 2002, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 220 mm, table width: 515 mm, table length: 640 mm, Wire EDM machine Chmer EDM Type: CD 305G X-path: 400 mm Y-path: 300 mm X-path: 220 mm bed: 515 x 640 mm Year of construction: 2002 Hours: 16333 Including documentation and parameters Dimensions: 245x200x203 cm LxWxH Iedpeqgcimefx Ag Doa

Year of construction: 2007, operating hours: 15,000 h, condition: ready for operation (used), - USED - CO2 LASER CUTTING MACHINE   X-AXIS TRAVEL: 1562 mm Isdpoxy Tn Esfx Ag Dja Y-AXIS TRAVEL: 772 mm Z-AXIS TRAVEL: 100 mm RAPID FEEDS X-Y-Z: 100 - 100 m/min WORKING AREA: 1500 x 3000 mm SOURCE: 2200 W; BYLASER 2200 CONTROL UNIT: BySOFT WEIGHT: 13500 Kg NOTE: No 1 5" HEAD

Condition: good (used), Year of construction: 2014, with changing table (without automtic storage) ByVision Touchscreen and manual control unit In contrast to the CO2 ByStar, the ByAutonom can change the cutting heads and cutting nozzles automatically. At the very end, only a BySprint could do that and then the new Fiber again. This means I can cut thick and thin material one after the other and the machine gets the right cutting head. Technische Daten / technical details: Laserleistung / laser capacity 6 kW Materialdicke Stahl / thickness of the material steel 25 mm Materialdicke Edelstahl / thickness of the stainless steel 20 Mm Materialdicke Alu / thickness of the material Aluminium 12 mm Blechgröße x,y / sheet size x,y 3000, 1500 mm Schneidbereich x,y,z, / cutting area x,y,z 3048, 1524, 80 mm Antriebsleistung / drive capacity 51 kW Gewicht ca. / weight ca. 15000 kg Isdpoqmmkcjfx Ag Doa Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: new, Year of construction: 2024, Container turning device 10 tons lifting capacity Double drive Synkron Axle distance steplessly adjustable by means of thread speed infinitely variable with foot remote control diameter from 300mm to 3500mm Iedpfeifk Rbsx Ag Dsa Roll width and diameter 120 x 270mm Speed 200 - 1200 mm/min.

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 55,785 h, machine/vehicle number: 1651, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Bystronic, controller model: P8005A, laser type: CO₂ laser, laser source manufacturer: Bystronic, laser source model: ByLaser 4400, laser hours: 34,403 h, laser power: 4,400 W, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, power: 4.4 kW (5.98 HP), type of cooling: water, year of last overhaul: 2024, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, safety light barrier, Maintenance including repairs carried out by Bystronic. Includes 2 cutting heads, 5" and 7.5", spare lenses and nozzles. Iodpfjxzp Azjx Ag Dsa BySprint 3015: ByLaser 3300 replaced with 4400. ByLaser 3300 available with defective gas cooler. Operating hours may change as the machine is in daily use. Delivery after arrangement and self-disassembly.

Condition: used, Year of construction: 2013, Bystronic fiber laser with automation in very good condition. Can be inspected under power upon appointment. Availability: 11/2025 More information available on request. Laser output: 4000W Ijdpfsxxyrzsx Ag Dja Working dimensions: 3000 x 1500 mm

Condition: new, Cardan shaft balancing machine BVI-03-74 Available in stock in Poland !!! Delivery time: one day!!! . . Machine for driveshafts weighing up to 150kg and up to 4700mm long. Suitable for small workshops with a large range of different shafts, including trucks. This balancing machine has high productivity and serves to balance the cardan shafts of cars and trucks. It makes the process of balancing the cardan shaft easy thanks to many technical solutions, while the machine has an affordable price, which reduces your financial burden and allows you to develop your business effectively. . . TWO TIMES faster than your machine. This balancing machine is majored to balance the shaft not only qualitatively, but also quickly. If you can balance in 2-2.5 times faster, then this is your real competitive advantage. . . HIGH PERFORMANCE ACCESSORIES The machine is equipped with three main types of adapters: 1. Fast clamping universal adapters. It has two main advantages: The first is that due to the special design the driveshaft flange is clamped within 5 seconds. This advantage is due to the fact that the driveshaft flange does not need to be fixed with bolts. THE SHAFT CAN BE CLAMPED 4 TIMES FASTER WITHOUT BOLTS. The second advantage is the centering rings. The driveshaft is mounted in the adapters with centering rings that can be made on an ordinary lathe to fit most common driveshafts. 2. KV Flange adapters. Used for balancing shafts with cross-tooth flanges. Applies to four flange sizes: 120, 150, 180, 205 mm. Usually used on truck driveshafts. 3. Adapter with slots. Used to mount various flanges with holes. Mounting the driveshaft is the same as on universal adapters, with the help of centering rings. KEY FEATURES • Balancing of 2, 3 and 4-support cardan shafts • Shaft length up to 4700mm, weight up to 150kg • Cardan installation in 1 minute Iodepbv Tfepfx Ag Dsa • Standard set of adapters - Installation of 80% of cardan shafts; • Three ways of fixing the center bearing • Soft-bearing type machine - high sensitivity to any vibration • Machine is operated by one worker • Sliding bearing supports - quick changeover, comfortable operation • Safety bracket with clamp for quick installation • Measurement in all planes at one time • Calibration of the machine by the operator • Displays imbalance in real time • Create and print reports SPECIFICATIONS Maximum cardan shaft weight 150 kg Maximum flange diameter 300 mm Maximum length of cardan shaft 4700 mm Number of machine supports 4 Number of simultaneously measured planes 2, 3, 4 Minimum achievable residual specific imbalance, 10 g mm/kg Rotor speed range 1000-2000 rpm Power supply 380V, 3 Ph, 50Hz Power, minimum, 2,2 kW Dimensions (length x width x height) 6000 х 1100 х 1450 mm Weight 700 kg ! We manufacture а full range of equipment for drive shaft balancing and repair service. Please contact us to get the best offer!

Year of construction: 2011, operating hours: 39,600 h, condition: ready for operation (used), This 3-axis Bystronic BySpeed Pro 3015 was manufactured in 2011. A CO2 laser cutting machine, it features a 4.4kW resonator and handles a max sheet size of 3000x1500mm. Refurbished in 2021, it has 65,500 operating hours and 39,600 cutting hours. Includes ByTrans Extended. If you are looking to get high-quality cutting capabilities, consider the Bystronic BySpeed Pro 3015 machine we have for sale. Contact us for more information about this machine. Iedpfoxxnh Rjx Ag Doa Application Types Cutting

Year of construction: 2006, condition: ready for operation (used), A CNC laser cutting system Bystronic is available. Laser power: 2200W, max. sheet dimensions X/Y: 3000mm/1500mm, travel path X/Y/Z: 1562mm/772mm/100mm, max. material thickness mild steel/stainless steel/aluminium: 8mm/6mm/4mm, positioning accuracy: +/-0.1mm, simultaneous speed: 140m/min, load capacity loading table/cutting table: 300kg/80kg. Machine dimensions X/Y/Z: approx. 6250mm/6000mm/2150mm, laser source dimensions X/Y/Z: approx. 1900mm/950mm/1250mm, weight: approx. 13500kg. Including combined cooling and filtration unit WKL 300-F. Dokumentation vorhanden. An on-site inspection is possible. Iodexx Ud Sspfx Ag Dja

Year of construction: 2022, condition: new, immediately available CNC press brake YAWEI PBH160/3100-4C - Pressing force: 1600KN - max. bending length: 3100mm - Year of construction 2022 - CNC controlled hydraulic crowning - Cybelec Modeva 19T controller - WILA upper tool clamp - 60mm table with 13.5mm x 22mm slot for insert dies - 2 front support arms sliding on linear guide - CE Fiessler Akas IIF light barrier - 24 months warranty - Commissioning, training Iodeiwfp Tspfx Ag Doa

Condition: excellent (used), functionality: fully functional, Laser-on hours: 18,894. In operation. Always maintained by Bystronic official technical service. Nominal sheet size: x = 3000 mm, y = 1500 mm Cutting area: x = 3048 mm, y = 1524 mm, z = 70 mm Iedpfx Aoxx R H Njg Doa Power: 4000 W Wavelength: 1 μm Polarization: unpolarized Pulse frequency: 1–2500 Hz Maximum sheet thicknesses*: • Steel: 20 mm • Stainless steel: 15 mm • Aluminum: 15 mm • Brass: 8 mm • Copper: 8 mm Maximum electrical consumption of the complete system*: 23 kW Maximum positioning speed (parallel X, Y axes): 100 m/min Maximum simultaneous positioning speed: 140 m/min Maximum axis acceleration: 12 m/s² Positioning accuracy Pa*: ± 0.1 mm Repeatability Ps*: ± 0.05 mm Edge detection accuracy: ± 0.5 mm Maximum workpiece weight: 750 kg Foundation: standard industrial floor, reinforced according to installation layout Operation via panel: 15" touchscreen, keyboard, and handheld control unit Disk drives: DVD-RW, USB 2.0 Network connection: RJ45 10/100 Mbit/s ByVision (see separate technical sheet for specifications): standard Machine weight: 13,000 kg Dimensions: Length: 10,150 mm Width: 6,200 mm Height: 2,500 mm

Condition: ready for operation (used), Year of construction: 2014, operating hours: 32,457 h, Control Unit Brand BYSTRONIC Model na This Bystronic ByAutonom 3015 was manufactured in 2014. A robust CO2 laser cutting machine from Switzerland, it features a 6kW laser power and can handle steel up to 25mm thick. With a maximum positioning speed of 169m/min and a quick table changeover time of 22s, it's designed for efficiency. Consider the opportunity to buy this Bystronic ByAutonom 3015 CO2 laser cutting machine. Contact us for more information about this machine. Ijdpfx Agexc Rc Es Doa Application Types Cutting

Condition: new, 2021 Durma 15 kW Fiber Laser Make: DURMA Type: HD-F(L) 3015 Working range X-Y-Z: 3060x1530x160 mm Laser power: 15000 Watt IPG Control: Siemens Sinumerik 840D sheet thickness mild steel: 40 mm Sheet thickness stainless steel: 30 mm Sheet thickness aluminium: 30 mm Sheet size: 3048x1524 mm Loading weight: 200 kg/m² Speeds X-Y axes: 100 m/min. Speeds X-Y axes simultaneous: 280 m/min. positioning accuracy: +/- 0,05 mm Repeating accuracy: +/- 0,05 mm Installation area L/W/H: approx. 14500x7500x2420 mm weight: approx. 12000 kg Standard equipment Automatic pallet changer Iedpfx Aegk Nlpsg Dja Control Sinumerik 840D Auto-focus cutting head Precitec Procutter F150 focus Automatic sheet position and sheet size measuring system Automatic nozzle cleaning Position laser diode Central lubrication Simple user interface parameter page (power-speed-pressure) External CAD/CAM programming software with autonesting optional Lantek software Work area lighting Warning light Multi-chamber exhaust system Special laser cutting options Remote maintenance CE marking IPG fiber laser source 15000 Watt including cooler Extended equipment possible: Filter, compact dust collector Vanterm Motorized chip conveyor for small parts/waste Laser Service Set Cloud License Lantek Expert Inside Software Lantek software with positioning - laser diode with automatic sheet metal position detection, measurement Camera Inside Linear drive We will be pleased to send you further information on request.

Condition: ready for operation (used), Year of construction: 2005, A Bystronic CNC laser cutting system is available. Laser type: ByLaser 4400, laser power: 4400W, wavelength: 10.7µm, working dimensions X/Y: 3000mm/1500mm, cutting dimensions X/Y/Z: 3000mm/1500mm/170mm, positioning speed: 80m/min, simultaneous positioning speed: 113m/min, acceleration: 4.5m/s², positioning accuracy: +/-0.1mm, repeatability: +/-0.05mm, max. workpiece weight: 890kg, max. sheet thickness mild steel/stainless steel/aluminum: 25mm/20mm/12mm. Machine dimensions X/Y/Z: approx. 12900mm/6100mm/2100mm, weight: approx. 13500kg, laser hours: 58157h, blower hours: 93930h, pump hours: 10398h. Includes water cooling unit, without extraction. The control was completely renewed in 2025. Documentation available. An on-site inspection is possible. Iedpsxv A E Ejfx Ag Dja