High Speed Press

BRUDERER BSTA 60 HL

Condition: good (used), Year of construction: 1995, machine/vehicle number: 0540/98, functionality: fully functional, Manufacturing number: 0540/98. Year of manufacture: 1998 ,. Capacity: 400 tons. Stroke length: 300 mm. Stroke: 10-40 / min. Slide adjustment 300 mm. Fjdsicbbzspfx Ambogd Installation height: 700 mm. The table measures 1600 x 1300 mm Net weight: 45 tons. Gable opening: 1600 mm. Exterior dimensions 2 x 3 x 6 meters. Control system MEAB. Coil feeder / straightener iRON RNE 50B / 11. Decoiler iRON SA6000 max 700 mm.

Condition: used, Year of construction: 1984, turning diameter over cross slide: 1,600 mm, turning diameter: 2,000 mm, turning diameter over bed slide: 2,000 mm, turning length: 35,000 mm, workpiece weight (max.): 63,000 kg, Center Lathe SKODA - SUT 200 TD MACH-ID 9446 Manufacturer: SKODA Model: SUT 200 TD Year of manufacture: 1984 Tandem construction on one bed, with left and right headstocks Faceplate double tailstock left and right Double carriage Steady rest included Roller rest included Operator panel with scales requires attention and replacement Motorized tailstock for each side (left and right) 3-bed way design Torque on chuck: 160,000 Nm Minimum turning diameter: Ø 315 mm Industries served: - Shipyards - Propeller shaft manufacturing - Hydraulic cylinder shafts - Camshafts - Defence & Aerospace - Rolls and shafts for steel mills - Crankshafts Specifications Metric / Imperial Turning length: 35,000 mm Swing over bed: Ø 2,000 mm Swing over carriage: Ø 1,600 mm Spindle power: 75 kW Bed width: 1,600 mm Quill diameter: Ø 400 mm Quill stroke: 250 mm Max spindle speed: 180 rpm Feed X-axis: 5,000 mm/min Feed Z-axis: 5,000 mm/min Workpiece weight: 63,000 kg Approximate dimensions: Length: 42,000 mm Width: 3,250 mm Height: 3,250 mm Weight: 158,000 kg Fedpfx Aoynky Asmbogd Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend verifying all important details.

Condition: excellent (used), Year of construction: 2004, year of last overhaul: 2004, 4-Hi CRM Rolling Mill Head – Froehling Froehling is a renowned brand known for its reliability and robustness in the rolling mill industry. 4-Hi rolling mill head with bending and tension control. The following are its features: Fgedpfeg Ryqkjx Ambed Manufacturer: FROEHLING (Germany) – Refurbished in 2004 Material processed: Aluminum alloys – brass – copper – low-carbon steel Strip width: 282mm (300mm) Strip thickness: 0.15 – 2mm Coil dimensions: ID 400mm – OD 1500mm Maximum rolling speed: 400m/min Work rolls: Diameter 130mm – Face 340mm Back-up rolls: Diameter 390mm – Face 335mm Complete with: Uncoiler and coiler Many sets of spare work rolls and back-up rolls Sold EXWORKS, disassembled and loaded onto a truck. Ready for any inspection by a prospective buyer. For any questions, please do not hesitate to contact us. IF YOU ARE INTERESTED, PLEASE SUBMIT YOUR OFFER; WE ARE SURE WE CAN REACH AN AGREEMENT.

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, pressure:63 t throat:250 mm stroke:8 - 100 mm Fgodpfofx Hv Hex Ambsd no. of strokes:120 Hub/min table::715 x 500 mm dayligth:330 mm ram adjustment:63 mm clamping plate:700 x 480 mm hole in the table:240 mm Hole in clamping plate:110 mm dimension of ram:450 x 280 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:1,2 x 1,7 x 2,7 m hydraulic tilting single column eccentric press, tilting in 4 steps, opening to rear (325 x 500mm) and below (360x160mm) with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot-trip operation possible, operating-mode selector for adjustment of continuous or single stroke, emergency cut-off, piece counter, various accessories

Condition: like new (used), Year of construction: 2024, Traverses XYZ: 625 x 450 x 400mm, Fedsyia T Sspfx Ambsgd 500 x 450mm diameter table, max table weight 400kg, maximum workpiece size 550mm dimeter x 450mm high, B axis table tilt +30°, -110°, C axis 360degrees, 18.5kW, 12000rpm, BT40, 24 pallets 120 station tool changer, Fanuc I series control, swarf conveyor,

Condition: good (used), CHARACTERISTICS Plate diameter ⌀; 3200 mm Maximum turning/turning diameter ⌀; 3300 mm - With upright forward; 3300 mm - With upright set back; 5600 mm Min. turning/turning diameter ⌀ - With advanced upright; 800 mm - With upright set back; 3100 mm Max turning height; 750 mm Control; FAGOR 8025 Spindle RPM (2 ranges); - 0,5 - 10 rpm - 10 - 40 rpm Motor Power; 80 hp Maximum table load; 30.000 kg Fgjdpor I Aykofx Ambjd

Condition: used, Year of construction: 1980, machine/vehicle number: A-07/471A, sheet width - max.:130 mm straightening roll diameter:40 mm :5 :2+2 sheet thickness - min.:0,4 mm sheet thickness - max.:3,5 mm weight:0,4 t dimensions of the machine ca.:0,6x0,65x1,15 m with integrated, stepless adjustable Vari-drive, reversing, operating-mode switch for manual and automatic operation, introduction roller cage, position indicator of straightening rolls via analogue display, adjustment of straightening rollers via hand wheels, automatic swivel arm Fgsdpfxscxxx Rj Ambed control, very good condition

Condition: used, machine/vehicle number: 7979, Table diameter: 400 mm Table with 8 T-slots: 12 mm Overall height: 175 mm Fedpfxsb Ez R Uo Ambogd Space required: 600 x 450 x 175 mm Weight: approx. 100 kg

Condition: ready for operation (used), Year of construction: 1969, Centre height: 355 mm Fsdpfsxpuu Eox Ambogd Centre distance: 3000 mm Max. swing diameter over bed/gap/cross slide: 715/790/520 mm Spindle bore: 86 mm Spindle mount according to DIN 55027: Size 11 Quill taper of tailstock: MK 5 21 spindle speeds: 5.6 - 560 rpm 42 feeds longitudinal/cross: 0.09 - 5.6/0.045 - 2.8 mm 22 Whitworth threads: 2 - 28 TPI 28 metric thread pitches: 1 - 14 mm 27 module thread pitches: 0.25 - 3.5 module 32 module threads: 4 - 56 module 32 diametral pitch threads: 8 - 112 DP Drive motor, pole-changeable: 380 V, 7/11 kW Weight approx.: 7 t Space requirement approx.: 6000 x 2300 mm

Condition: used, Year of construction: 1989, pressure 250 t Fgjdpfx Asvut Ncsmbed stroke 20 - 190 mm no. of strokes 24 / 48 /min throat 500 mm passage to the back 1000 mm dayligth 615 mm table surface area 1400 x 880 mm hole in the table 450/500 mm table height over floor 800 mm ram surface 1380 x 620 mm ram adjustment 125 mm power requirement 29,0 kW Weight 27,0 t dimensions of the machine ca. 2,0 x 2,6 x 4,1 m x m x m permitted for manual loading according to the German Safety Regulations (UVV) with motor with 2 speeds, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, semi-automatic stroke adjustment, motoric centralized lubrication, two-hand operation can be inspected in running function in our warehouse