Bruderer BSTA 250-75B High Speed Press

BRUDERER BSTA 250-75B, BBV 190

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, Westafalia Separator SB 60-36 used in beverage industry, in excellent condition. Nlodpfx Ajq U Dbdoa Esk

Condition: ready for operation (used), Year of construction: 1996, 630T press retrofitted in 2010 by the company LITOSTROJ RAVNE Capacity: 630 tons Nodpfxshh Hwlj Aa Ejlk Total power: 15 - 630 tons Ring power: 10 - 230 tons Lifting power: 50 tons max Back pressure power: 5 - 120 tons Ejection power: 22 tons max Max slide stroke: 180 mm Ring race: 30 mm Back pressure stroke: 30 mm Slide surface: 900 x 900 mm Table surface: 900 x 900 mm Number of strokes: 28 - 72 s.p.m. Power requirement: 80 kW Default configuration

Condition: new, Ostas Hydraulic Profile Ring Bending Machine OPK 45 - 3 Special equipment included in the price: 3 driven rollers Digital display Incl. standard roller set steel Description Hydraulic / motorized ring bending machine horizontal and vertical applicable with 3 driven rolls 3 rollers motor driven Feeding of the upper roller hydraulic Rollers are hardened Left/right rotation by means of foot pedal Shaft 50mm roller-Ø top 158 mm Nodpfx Asg Tzbwja Eslk roller-Ø bottom 158 mm Speed 4,5 m/min Motor power : 0,75 +1,5 kW Electrical connection 400 V According to CE standard Weight 420 kg

Condition: used, machine/vehicle number: 51568, pressure:100 t stroke:0-500 mm table surface area:800 x 650 mm ram surface:800 x 600 mm hole in the table:355 mm table height over floor:800 mm dayligth:1130 mm weight of the machine ca.:5,7 t throat:310 mm space requirements approx. LxWxH:1,2 x 2,0 x 3,67 m Nlsdocxxrropfx Aa Eok

Condition: excellent (used), Year of construction: 1998, pressing force: 125 t, Hydraulic press brake Fab. EHT Typ. VARIOPRESS 125-3550 Year 1998 Technical data Make: EHT Type: Variopress 125-3550 Nodpfor Epr Usx Aa Eelk Year of construction: 1998 Capacity: 125 t Effective length: 3550 mm Machine column: 2550 mm Projection: 300 mm Stroke: 240 mm Installation height: 640 mm Oil volume 250 L Dimensions: approx. L 3.90 x W 1.80 x H 3.00 m Weight: approx. 12 t Equipment - Control system: Cybelec DNC 80 2D graphics - Automatic upper tool clamping - Lower tool clamping 90mm and 13mm - controlled axes: Y1, Y2, X1, X2, R, Z1, Z2 - motorized crowning - 6 x V block die length 3,500, segmented: with V12/30°, V40/80°, V24/80°, V10/30°, V24/30°, V16/30° - Punch straight, H 350mm / approx. 70°, length 3060 mm, segmented All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: new, thread dia. M3 - M16 mm max. 187 U/min. working area 180 - 2000 mm engine output 0,7 kW Electric tapping machines for M3 - M16 thread, Angle adjustable. 9 pcs. Quick-change chuck with slip clutch. Adjustable via display: variable speed, adjustable depth, material selection, choice of Main direction of rotation, thread selection. Nsdpfxofg U Sqo Aa Eslk optional: Clamping table with T-slots: 990x700x800mm. Magnetic base. Also available: M14 to M24 and M27 to M33.

Condition: ready for operation (used), AMADA PROMECAM 3000 x 6 shears Type GPX 630 Capacity 3000 x 6 Maximum stroke 160 mm Rate 16 to 45 strokes/min Cutting angle from 40' to 2°20' Njdovt Svropfx Aa Eelk Rear stop stroke 1000 mm Motor 15 kw Approximate weight 6500 kg Dimensions 3750x2000x1850 mm

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 3.04-00054, Equipment: type plate available, Used Bellaform extruder BH45-30D Nlodpjuxa Abefx Aa Ejk with barrier screw and mixing section. 45mm extruder with 30L/D screw length The extruder is equipped with a new control system full function-tested Several extruders of the same type available !

Condition: excellent (used), Year of construction: 1980, Westfalia Separator SA 40, used in beverage industry, in excellent condition. Nedpfx Aaoq U Dbpe Eslk

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: TET351P5-offAD-Bypass - 2200373733, cooling capacity: 66 kW (89.73 HP), type of input current: three-phase, type of cooling: water, overall weight: 1,082 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -5 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 11.2 m³/h, pump pressure: 4.68 bar, total width: 866 mm, total length: 2,250 mm, total height: 2,054 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process chiller / air-cooled water chiller, Type: TAEevo Tech 351 P5-offAD-Bypass Nlsdpfx Aaowlt Ras Esk MTA S.p.A. Chiller, water chiller; cooler TAEevo Tech 351 P5-offAD-Bypass are air-cooled compact water chillers suitable for outdoor installation down to -5°C. Includes crankcase heater, electronic expansion valves, phase monitoring, 350-liter buffer tank, and integrated P5 high-pressure pump. Special features: - Open fill system / attached tank - Bypass with manual valve between water inlet and outlet Chilled water outlet temperatures adjustable from -10°C to +30°C. Cooling capacity: 66 kW Chilled water temperature outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 11.2 Available pump pressure (bar): 4.68 Ambient temperature (°C): 32 Refrigerant: R 410A Electrical data: Voltage (V): 400, Frequency (Hz): 50, Phases: 3 Max. power consumption (kW): 39 Max. current (A): 68 Start-up current circuit (A): 213 Protection class: IP54 Dimensions: Length (mm): 2250, Width (mm): 866, Height (mm): 2054 Weight (kg): 1082 Connection: Rp 2" Serial no.: 2200373733 Year of manufacture: 2021 Condition: Visual 2, Technical OK used (Subject to technical changes and prior sale!) Location: MTA Deutschland GmbH, 88131 Lindau Used machines may have visual imperfections due to their usage. (Subject to technical changes and prior sale!)