Horizontal Kiln For Ceramic Slabs

Breton

Condition: used, Year of construction: 1996, machine/vehicle number: -, functionality: fully functional, operating hours: 50,000 h, input voltage: 400 V, input current: 120 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 2,200 mm, travel distance Y-axis: 12,000 mm, travel distance Z-axis: 400 mm, workpiece width (max.): 2,000 mm, number of axes: 3, overall weight: 35,000 kg, year of last overhaul: 2024, Hello, I have for sale a granite slab polishing line by Breton, as shown in the photos. The line is equipped with 17 heads and is fully operational following a complete overhaul, featuring a new belt, new software, four tables, and a slab dryer at the exit table. Upon purchase, we will demonstrate the machine in operation. We offer the machine with pre-set processing parameters and expertise for achieving a perfect polish, along with access to a proven service team that handled its overhaul. The machine is ready to start work immediately after installation. For any questions, please contact me by phone or email. Lodpfx Alsy Ewnie Ishh

Condition: excellent (used), functionality: limited functionality, Year of construction: 2000, For sale: High-quality Liebherr concrete mixing plant in excellent condition – including BIBKO wastewater treatment system A used, excellently maintained concrete mixing plant from the renowned manufacturer Liebherr is for sale. The plant impresses with its low operating hours, complete technical documentation, and original delivery condition – all components come from the manufacturer itself. Important addition Also included in the offer is a wastewater treatment system from BIBKO Umwelttechnik & Beratung GmbH. This allows for environmentally friendly and economical reuse of residual and wash water, which not only reduces operating costs but also meets the ecological requirements of modern production processes. Main technical data Type: Ringtellermischer R 1.0 Practical mixing capacity: 1.0 m³ solid concrete per batch Efficient filling: A 6m³ truck mixer is filled in only 6 batches Theoretical mixing capacity: 50 m³/h Practical mixing capacity: 40 m³/h Aggregate storage Star storage: 1,200 m³ total capacity Active storage: 65 m³ Lhedpfowlwruex Al Ieh Number of aggregate components: 5 Cement silos 2× cement silo at 40 t each with overfill protection 1× two-piece cement silo at 80 t with overfill protection Condition of the plant Commissioning: 2000 Out of operation: since 2006 Operating hours: approx. 3,500 (estimated) Condition: Very good – minimal use, excellently maintained Previous owner: First owner Originality: All components original from Liebherr Documentation: Fully available (electrical diagrams, foundation plans, structural analysis, etc.) The solid and well-thought-out construction of the plant enables easy disassembly and reassembly thanks to the predominantly bolted design. The control cabinets are connected to each other via plug connections – for details, please refer to the attached PDF documents. Additional service upon request: We are happy to support you in realizing your project with experienced partner companies for: Dismantling and reassembly Electrical commissioning (industrial electronics technician) Organization of transport with reliable forwarding agents This way, your new plant can be quickly and professionally put into operation at a new location. Interested? We look forward to your inquiry and are always available to answer any questions you may have!

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 2,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 800 mm, total width: 4,300 mm, spindle speed (max.): 24,000 rpm, total height: 4,789 mm, table load: 10,000 kg, overall weight: 30,000 kg, spindle motor power: 45,000 W, controller manufacturer: HEIDENHAIN, controller model: k25, product length (max.): 4,280 mm, number of axes: 3, This 5-axis Breton Matrix WM 800 K25 was manufactured in 2003. It features a substantial table dimension of 2000 x 3000 mm and impressive axes strokes of 2000 mm in X, 2500 mm in Y, and 800 mm in Z. The machine has a maximum rotation speed of 24000 rpm and a rapid forward speed of 40 m/min. If you are looking to get high-quality milling capabilities, consider the Breton Matrix WM 800 K25 gantry milling machine we have for sale. Contact us for further details. Lsdsy Amd Ijpfx Al Iehh • Table dimensions (X/Y): 2000 x 3000 mm • Rapid traverse (X/Y/Z): 40 / 40 / 20 m/min • Power: 45 / 20 kW

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 1,600 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 600 mm, total height: 4,300 mm, overall weight: 28,000 kg, spindle speed (max.): 24,000 rpm, spindle motor power: 20,000 W, tool weight: 15,000 g, product length (max.): 4,798 mm, number of axes: 5, This 5-axis Breton Matrix k16 was manufactured in 2002. It features a working area of 2000 × 1600 × 800 mm with vertical spindle and a tool magazine with a 30-position capacity. The machine offers rapid traverse rates up to 40 m/min and a maximum spindle speed of 24,000 rpm. If you are looking to get high-quality milling capabilities, consider the Breton Matrix k16 machine we have for sale. Contact us for more information. • Working area: Lhodpfx Aljyf Iiij Ieh • With vertical spindle (Y / X / Z): 2000 × 1600 × 800 mm • With horizontal spindle (Y / X / Z): 1600 × 1200 × 800 mm • Axis travels: • C: 0° – 360° continuous • A: ±105° • Speeds: • Rapid traverse X/Y: 40 m/min • Rapid traverse Z: 20 m/min • C axis: 19.5 rpm • A axis: 12 rpm • Acceleration X/Y/Z: 2.5 m/s² • Spindle (electrospindle): • Tool holder: HSK A63 / E63 • Max torque: 38 Nm • Max speed: up to 24,000 rpm • Tool magazine: • Capacity: 30 positions • Max tool diameter: 140 mm • Max tool length: • 200 mm (Ø 140 mm) • 300 mm (Ø 90 mm) • Max tool weight: • 15 kg at 16,000 rpm • 12 kg at 24,000 rpm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1993, machine/vehicle number: 1590, Equipment: cabin, hydraulics, Zenith Machinenfabrik GMBH Neunkirchen/Siegerland GERMANY Used for production of concrete vibropressed pavement and borders. The machine is fully functional and it comes togheter with 2 mixers, bunkers for aggregates, skippers, packaging machine and 150 pallets for production. It also has included molds for different pavement models. We also have to sale a Mobil Zenith 941 II A from 1978 which also has the identification plate attached. Lsdpfx Aeucruusl Iohh The machine is beeing sold because it was replaced with newer techonology.

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 33551/2007, input voltage: 400 V, table width: 2,200 mm, table length: 3,700 mm, input frequency: 50 Hz, The machine has a new spindle installed in January 2026. Available for relocation May 2026 Lhsdpsym Svvsfx Al Ijh

Condition: good (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, power: 13 kW (17.68 HP), It is a LEVIBRETON ONE, surface sanding machine The machine has a wobble head and a 750mm diameter grinding disc. The machine can be used to polish the surfaces of hard stone and soft stone (marble). Ljdpfxjrpi E As Al Iehh polished, satinized and bush-hammered with the appropriate tool.

Year of construction: 2014, condition: like new (used), COOLING (DEEP FREEZING) HORIZONTAL TUNNEL (Instruction manual added) Liquid nitrogen deep-freezing of foodstuffs Model ZIP FREEZ SILVER LINE 2 Lodpfx Asyf Hlisl Iehh type 90X12 Overall dimension in m: Lengh 10,30 Width 2,30 Height 1,81 Height in cleaning position 2,31 Deep-freezing chamber Lengh 8,70 m Effective width 1,20 m Height 0,25 m Surface in m2 10,44 Weight 3200 kg Made by SEPAR, France Was used for cooling of the hot filled desserts In complete with Associated Controls, Conveyor and Pipework

Condition: new, Year of construction: 2021, functionality: fully functional, total height: 5,400 mm, total length: 8,300 mm, total width: 2,300 mm, warranty duration: 12 months, input voltage: 380 V, input frequency: 50 Hz, Machine for squaring blocks and cutting slabs and thick slabs, featuring a heavy-duty, arc-welded steel structure, which is heat treated to ensure the required stiffness of the system and a top cutting precision. Lodjtwww Hopfx Al Ijhh Extremely user-friendly, the machine is provided with a control console with touch-screen housed in the electric cabinet and a mobile button panel to actuate the main working axes. The machine needs to be adapted for different voltages and frequency. The machine is not available for North America.

Year of construction: 2010, condition: used, Levibreton KGP is a calibrating machine for levelling strips and tiles, which move on a conveyor belt, using a series of diamond tools. Lodpfxovun T Aj Al Iehh

Condition: excellent (used), Year of construction: 2008, overall weight: 120,000 kg, main lifting speed: 3 mm/min, working height: 10,000 mm, Double hoist 60 + 60 Ton Lifting class H2 Freqence vario speeds Hoist ABUS GM 7600U6 FEM Group 1Am Ikusi remote (TM70 2.13) Ledpfx Aloxmf R So Iohh Little used / Under power / Direct availebel Span: 31820mm Lift height: 10000mm Capacity Kg: 120000 Lifting speed:0,50 - 3,30 M/Min Hoist trolley:5/20 M/Min Crane driving:1/20 M/Min Length: 31820mm Width: 4500mm Height: 2300mm Weight: 86000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, functionality: fully functional, GRINDING PLANT capacity 1 t/h with roll press, sieving in 3 granulometries with nutation screen and horizontal screens. Input: inlet grain size < 10 mm (marble, granite and quartz) with loading by big-bags on the included hopper. Output: 3 grain sizes (0-50, 50-100 and 100-300 microns). 70% of 100-300 microns, Lodox Agxvopfx Al Ishh 15% of 50-100 and 15% of 0-50 microns. Storage with propulsion system for sending to silos (silos not included)

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Complete polishing line for granite slabs still active and fully functional, viewable and equipped with: - automatic loading unit - motorized roller conveyors for automatic slab feeding - combined calibrating/polishing machine with high removal rate polishing spindles equipped with mechatronics for material calibration - equipment for drying by means of ventilation on both surfaces of the slabs - automatic waxing machine Lodpfx Aloxdnbbs Ijhh - automatic protective film applicator Available from next March 2026 .

Condition: excellent (used), Year of construction: 2014, operating hours: 8,900 h, machine/vehicle number: LP50VH2, 1) Technical specifications Press with conveyor Technical data baler: Manufacturer Presona Typ LP 50 VH2 Year of construction 2014 Press power main press 50 tons Specific press force 63 N/cm2 Feed channel 1,500 x 1,100 mm Filling volume 2,7 m3 Theoretic throughput capacity 730 m3/hour Throughput capacity under operating conditions 340 m3/hour Bale size 1,100 x 720 mm, lenght variable Drive power 45 kW Tying system 5-fold, vertical, fully automatic Throughput capacity at a • bulk weight of 30 kg/cbm 8 up to 10 tons/hour • bulk weight of 50 kg/cbm 11 up to 13 tons/hour • bulk weight of 100 kg/cbm 15 up to 22 tons/hour Bale density (paper, newspaper) 400 up to 550 kg/m3 Ljdpoyrhi Nefx Al Ijhh Filling volume hydraulic oil tank 600 l Weight baler 16 tons netto Scope of delivery: Press, electrical cabinet, control panel, chain conveyor The documentation (operating manual, CE declaration, electrical/hydraulic diagram) is complete. Visiting is possible by appointment. We are not responsible for technical information or any errors. Upon request, we can send video materials of the working press

Condition: refurbished (used), functionality: fully functional, power: 30 kW (40.79 HP), input voltage: 400 V, input frequency: 500 Hz, workpiece length (max.): 3,400 mm, workpiece width (max.): 1,800 mm, workpiece height (max.): 200 mm, table length: 4,500 mm, table width: 2,300 mm, table height: 1,800 mm, table load: 500 kg, 5-Axis Waterjet Cutting Center equipped with: - integrated working tank - 4.200 bar full electric e-drive™ - 19” numerical control - abrasive pressurized tank - cutting head - watercad-cam software accessories included Lodpfjxbgvfsx Al Ishh - 5 axis ±55° interpolating system and touchwave ce-ramic™ - loading and unloading system - light laser barriers Included expenses: - Installation of the machine(s) - Machine full-load start-up - Practical training to BUYER’S staff on the machine functions