Mini excavator

Bobcat E35 - 3500 KG

Year of construction: 2023, condition: new, Brand Bauer Model: GF-24KW Year of manufacture: Unused, 2023 Serial number: On request Capacity (KvA) 30 Capacity (Kw) 24 Engine model ZH4100D Fuel Diesel Nwsdpfx Ageltml Ajhjp Alternator model YHG-24KW Voltage 400 Frequency (Hz) 50 RPM 1500 Amperes (A) 43,3 Dimensions LxWxH (mm) 1600 x 760 x 1650 Weight (Kg) ca 600 Number of pieces in stock 2 Made in China Comments Unused open skid diesel generator, Smartgen genset controller

Condition: good (used), Well-maintained horizontal creel. Nwjdpfx Aeunhl Ujghep Passage 1000 mm. Stroke 800 mm. Feed electronically adjustable. Clamping carriage approx. 7.5 m long with 5 hydraulic clamping jacks. Can still be inspected in operation.

Condition: used, Year of construction: 2025, DESCRIPTION / DESCRIPCIÓN / DESCRIPTIONHMK 145LC SR-5, 2.3 m stick, 4.6 m boom / 0.70 m3 ? 1200 mm bucket / double-acting hydraulic line, joystick proportional control / hydraulic line support for rotation / hydraulic line for quick coupler / Smartlink GPS+GPRS / air suspension and seat heatingSingle-/double-acting hydraulic lineAuxiliary hydraulic line for rotationHydraulic line for quick couplerSetting the flow rate (liters per minute) on the displaySetting the pressure (bar) on the displayProportional control on the joystickSafety valves for boom and armOverload warning switchRod protectionTravel alarmPneumatic seatSeat heatingRain/sun visorFOPS/sun visorFOPS2 cab protection systemComplete windshield protection cage (stone/rock)2-part boom 4,8 mFront dozer bladeReversing cameraRight side camerasWithout bucket: D.R., 0.6 m3 ? 985 mm ==> 0.75 m3 ? 1210 mm2.6 m arm price differenceBoom cyl. pipe protectionRubber track pads ROAD LINER-500 mmLED working lightAutomatic lubrication system Groeneveld Twin Heavy DutyWarranty 1 year or 2,000 hours, whichever comes first -Certificate 31Upper chassis swing movement. Alarm1 32Leica Ready 2D/3D pre-installation10 33Front dozer blade ready (without blade)1 34500 mm base plates + 4 additional holes for bolting on1INCL. 35600-mm-Bodenplatten1 36700-mm-Bodenplatten1 37Rutbber caterpillar plate for bolting on ? 500 mm ? from Hidromek supplier ex works with bolted-on metal rail with 4 additional holes (not in the chain)1 38Rubber track plate for bolting on ? 500 mm ? from SOLIS. Is screwed to the chain, on the metal plate in the middle1 39Additional hydraulic line ? Leakage line1 Nwedsur D Umspfx Aghop 40Dual high flow ? Double-acting hydraulic line with high flow.1 41Smartlink1 42Single/double acting hydraulic line1 43Auxiliary hydraulic line for rotary movement1 44Hydraulic line for quick coupler1 45Setting the pressure (bar) on the display1 46Proportional control on the joystick1 (*) NB: The prices in the option is valid only when the option is delivery with the machine. Spare parts price can be different..... ..... Subject to prior sale and errors excepted Images show original consumption data

Condition: new, functionality: fully functional, power: 15.2 kW (20.67 HP), fuel type: diesel, fuel consumption per hour: 4 l/h, fuel tank capacity: 25 l, color: orange, overall weight: 2,500 kg, empty load weight: 2,200 kg, operation weight: 2,500 kg, lifting height: 4,000 mm, drive condition: 100 %, chain condition: 100 %, Year of construction: 2025, operating hours: 10 h, Equipment: parking heater, Mini Excavator Tec-Point GmbH YXE25 Compact, powerful, and brand new Delivery time: 6-8 weeks At a glance Condition: NEW Engine: Yanmar 3TNV80F Rated output: 15.2 kW (20.7 hp) Operating weight: 2,200 kg Bucket capacity: 0.068 m³ Warranty: Full manufacturer's warranty Description Nedpfxew Tfdgj Aghswp This brand-new mini excavator is the perfect choice for efficient and precise work in confined spaces. Its robust construction and reliable Yanmar engine ensure long service life and outstanding performance on any job, from earthmoving to trenching. • High maneuverability • Intuitive operation • Durable, robust design Detailed Technical Specifications 2410 mm max. digging depth 2880 mm max. dumping height 4520 mm max. digging reach 57° maximum gradeability 9.5 rpm swing speed 2–3.8 km/h travel speed 4100 mm transport length 1500 mm transport width 2440 mm transport height 20 kN bucket digging force Compliance and Safety This machine meets the highest safety standards and is CE certified. 2006/42/EC (Machinery Directive) 2014/30/EU (EMC Directive) 2011/65/EU (RoHS Directive) Interested? Contact us today! Net price: €16,900.00 | Location: Rheda-Wiedenbrück

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption Nwsdpjfy Txyofx Aghsp The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Year of construction: 2016, condition: ready for operation (used), Mini excavator EUROCOMACH ES 18 ZT YEAR 2016 acc. Counter 2.186 hours 1.750 KG Nedpohq A Rgjfx Aghowp 11,2 KW quick coupler MS 01 hydr. embankment bucket backhoe bucket hydr. adjustable undercarriage cabin with heating working light original paint good chains Selling price: 17.950,-- net Also favorable delivery possible !!!

Condition: new, functionality: fully functional, power: 8.6 kW (11.69 HP), gearing type: automatic, fuel type: diesel, color: yellow, overall weight: 1,000 kg, empty load weight: 1,000 kg, operation weight: 1,000 kg, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, emission class: euro5, Year of construction: 2025, Equipment: additional headlights, cabin, The GG800NXC Expandable Tracks Movable Arm Operating weight: 1,000 kg Bucket capacity: 0.025 m³ Bucket width: 380 mm Engine: Gunter Grossmann Diesel Euro 5 Rated power: 8.6 kW / 3600 rpm Main pump: Wayne Hydraulic Hydraulic pressure: 16 MPa Swing motor: Dalí Travel motor: Dalí Nedjxuwuxopfx Aghswp Travel speed: 1.5 km/h Max digging depth: 1,650 mm Max digging height: 2,610 mm Max dumping height: 1,850 mm Max digging radius: 2,890 mm Swing radius: 360° Max dozer blade lift height: 345 mm Max dozer blade digging depth: 255 mm Length: 2,770 mm Width: 930 mm Height: 2,100 mm Track length: 1,230 mm Chassis width: 896 mm Track width: 200 mm is a compact, professional mini excavator ideal for precise operation in hard-to-reach areas. The enclosed cab provides the operator with comfort and protection in all weather conditions. With a weight of 1,000 kg and a 0.025 m³ bucket (380 mm wide), it allows efficient excavation in confined spaces. Powerful and environmentally friendly performance The GG800NXC is powered by an EU Stage V-compliant Gunter Grossmann diesel engine (8.6 kW at 3,600 rpm), providing reliable and eco-friendly operation. The 16 MPa Wayne hydraulic system and Dali motors ensure smooth, responsive controls with a travel speed of 1.5 km/h for optimum mobility. Wide working range It offers a digging depth of 1,650 mm, a height of 2,610 mm, and a 360° swing range for maximum maneuverability. A dumping height of 1,850 mm and a dozer blade lift height of 345 mm enable versatile earthmoving in varying conditions. Compact and reliable With dimensions of 2,770 x 930 x 2,100 mm, the GG800NXC is easy to transport and highly agile. Its robust construction and enclosed cab make it ideal for year-round use by contractors, landscapers, and private users seeking a dependable mini excavator.

Condition: used, Year of construction: 1985, operating hours: 3,500 h, Please contact ATS Norway for more information Please provide reference number upon request: 20847 Njdpfx Aewvzfyjghswp Specifications: Model year: 1985 Hours: approx. 3,500 Rear tire size: 18.4-26 Support legs Hydraulic tilt Digging bucket included Control panel for drill tower Description:JCB backhoe loader from 1985, sold with mounted drill tower and associated control panel.A digging bucket is included.According to the owner, all machine functions are working properly.The rock drill was replaced a few years ago.The compressor reportedly delivers slightly low air pressure.Quick delivery possible. Hours: 3500 Own weight: 8000 Model: Traktorgraver

Condition: new, Year of construction: 2025, SAPI Powder Coating The perfect layer for lasting protection. Powder coating is a highly effective and widely used method for applying a protective and decorative finish to various types of surfaces. It is a dry finishing process in which a fine powder composed of resin, pigments, and additives is applied to a substrate. The powder is electrostatically charged so that it adheres evenly to the surface, forming a uniform coating. To achieve optimal adhesion and durability, the substrate is first thoroughly cleaned and prepared. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is crucial for the powder to bond effectively to the substrate and achieve a strong and long-lasting coating. A powder coating system typically consists of various components and equipment required for the application and curing of powder coatings. SAPI_Powder_spray_gun Spray Booth and Spray Area The booth provides a clean environment for the application process and ensures even powder distribution. Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. Powder Feed System The powder feed system consists of a hopper or container in which the powder coating material is stored. It typically includes equipment such as powder pumps, feed hoses, and powder screens to transport the powder from storage to the spray gun. Pretreatment Equipment Pretreatment equipment is used to prepare the substrate before the powder coating is applied. This may include processes such as cleaning, degreasing, rinsing, and surface treatment to ensure good adhesion and durability of the coating. Curing Oven A curing oven is an essential component of a powder coating system. It is used to heat the coated substrate to the correct temperature so that the powder coating can melt, flow, and cure into a durable finish. The oven typically consists of a conveyor system or racks to transport the coated parts through the oven chamber. Nodpfxowf Dpgs Aghewp Exhaust system An exhaust system will be installed in the facility to extract excess powder, fumes, or volatile compounds generated during the coating process. This system helps maintain a clean and safe working environment for personnel and prevents the accumulation of powder particles in the air.

Condition: used, total height: 1,800 mm, total length: 3,500 mm, total width: 2,300 mm, Empty weight: 5.800 kg Price: On request Grinding diameter: 315mm Grinding depth: 500mm Swing: 500/600mm Stroke of table: 800mm - Documentation available: No - CE certificate present: No - Serial number: 31577 - Control: Conventional - Model: inderslijper intern - Travel X: 500mm Nodpfxswya A Ss Aghowp - Grinding diameter: 600mm - Transport dimensions: 3500mm x 2300mm x 1800mm (l x w x h) - Transport weight [kg]: 5800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum