Chip conveyor system

BMF SPA

Condition: new, Year of construction: 2026, Cut-to-length and mitre saw type: ZS 200 N - 5 KW motor with machine stand, Machine via handwheel and worm gear (rear) Tiltable Hedpfxsk H Ic Uo Afnonh Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake and automat. Star delta motor control Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: swiveled: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees inclined: 140 mm Saw can be swiveled on one side up to approx. 25 degrees to an acute angle and tilted flat to the left up to 30 degrees Carbide circular saw blade 520x4.0/2.8 x 50 mm 60 WZ neg. for wood RLH-ST60 6.0 mtr. measuring length, mounting side: left Cross-cut fence / roller conveyor, heavy-duty design, Stop slide adjustable from the workstation via handwheel, electronic-digital dimension display, pneumatic clamping of stop slider, stop flap folds backwards, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connection piece: overall length: 6.7 mtr. Surcharge for digital electronic display unit type: FIAMA EP6 for 230 V mains operation, with electric on/off switch and socket. Powerful dark red LED display. Higher accuracy than the battery-powered crystal display RO-ST60 4.0 m long feed roller conveyor Mounting side: Right Heavy-duty design, steel rollers: 60 mm Diameter, roller spacing: 200 mm 400 mm roller width, 3 support feet and connection piece Location: From stock 54634 Bitburg - immediately available - Picture: similar. Machine is still in original packaging

Year of construction: 2011, condition: good (used), Shredder system, single-shaft shredder, shredder, chipper, cutting mill, single-shaft crusher, rotor mill -Shredder system: completely made of stainless steel, for frozen meat or other -Motor power: 4 kW -Speed: approx. 60 rpm -Number of cutting knives: 10 pieces -Dimensions cutting blade: 250 mm -Filling spout 500 x 895 x H480 mm -Dimension 880/1390/H2060 mm -Weight 640 kg Hnsdpfxsh Di H Ds Afnoh

Condition: good (used), Year of construction: 2016, machine/vehicle number: PRJ052353, Offer 25490 Technical Data: Hnjdpfx Aoxy Hp Aofneh - Drilling capacity in steel ST 60: 40 mm - Drilling performance in steel ST 60: 50 mm - Drill spindle taper: MK 4 - Drill spindle stroke: 160 mm - Digital speed display - Throat depth: 300 mm - Swivel table with vice: 440 x 440 mm - Column diameter: 145 mm - Electromagnetic feeds: 0.1 – 0.2 – 0.3 – 0.4 mm/rev - Infinitely variable drill spindle speeds with digital readout: 200 – 3200 rpm - Drive: 400 V / 1.8 / 2.9 kW - Lighting - Electrical foot switch - Required space (approx.): W 650 x H 1900 x D 800 mm - Weight (approx.): 470 kg

Condition: excellent (used), Year of construction: 2018, Tornos Multiswiss 6x32 Hodswf I Rzspfx Afnenh Year of manufacture: 2018 Operating hours: 14,100 hours Including various accessories

Condition: new, Year of construction: 2025, functionality: fully functional, saw blade diameter: 700 mm, cutting height (max.): 250 mm, working height: 850 mm, power: 7.5 kW (10.20 HP), We sell 1 x JRIMAC crosscut saw UKS 1.000 Hedpfxorfudre Afnonh Cross cuts: 60x940 - 140x820mm - 180x720 - 220x520 - 240x340 Max. cutting height: 260mm Saw blade: 700mm Working height: 850mm Bottom and top extraction sockets: 160mm - Infinitely adjustable, pneumatic cutting feed - hydraul. Brake cylinder for even lifting speed - Pneumatically controlled workpiece clamping device - cutting release via 2-hand control, with safety shield - Roller conveyors and stop systems on request

Condition: new, Extraction capacity of filter unit at spigot*: 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Noise level*: 52 db(A) Dimensions L/W/H in mm: L 329 / W 374 /H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on the filter equipment Special voltage or special colour on request Application: Extraction of oil mist and smoke, for small to very large machine workrooms. Your advantages of the ELBARON series: - 18 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available Hnjdpfoh Rdwxex Afneh - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke. For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as standard and can be controlled, for example, using a laptop. The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects.

Condition: used, Year of construction: 2008, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 680 mm, spindle speed (max.): 24,000 rpm, Order no. 5.3-745 1 used Horizontal Milling Center Heckert HEC 400D, built 2008 1 used Horizontal Milling Center Heckert HEC 400D, built 2008 CNC control Sinumerik 840D Hsdpforairwsx Afnjnh NC rotary table B-axis Magazine for 80 tools Pallet changing device, 2 pallets 400mm x 400mm Internal coolant supply IKZ chip conveyor Coolant device CNC control Sinumerik 840D NC-rotary table B-axis automatic tool changer for 80 tools pallet changing device, 2 pallets 400 mm x 400mm coolant through spindle device IKZ chip conveyor coolant device Technische Daten / technical details: X-travel longitudinal 650 mm Y-travel vertical 650 mm Z-travel cross / Z-travel cross 680 mm B-axis / B-axis 360 ° Spindle taper HSK 63A Drehzahlbereich Spindel / spindle speed 24000 Upm /rpm Werkzeugplätze / tool places in changer 80 Gewicht der Maschine ca. / weight approx. 13000 kg Technical data, accessories and description of the machine are not binding - Technical data, accessories and description of the machine are not binding.

Year of construction: 1998, condition: excellent (used), NEUE HERBOLD cutting mill / granulator Universal mill - heavy version Made in stainless steel -Year of construction 1998 - made of stainless steel Hnsdeh Rwc Ejpfx Afnoh - from technical center (machine was used exclusively for test/demonstration purposes - Rotor diameter: 300 mm - Working width: 500 mm - 3 rows of knives

Year of construction: 2007, condition: excellent (used), Inline can / jar washer & dryer Completely stainless steel Container Max 180mm wide & 250 hight as-is or tested and adjusted to costomer needs Hnjdpfoh Eazzsx Afneh

Condition: like new (used), Year of construction: 2019, operating hours: 1,256 h, functionality: fully functional, machine/vehicle number: HTS.XD.26.A1.0133, Machine Name - Dugard Hanwha Machine Model - XD26H S.N A1.0133 Y.OM 2019 Description - Fanuc i Series control Max Turning diameter 26mm 8000 RPM main and sub spindle Upto 20 tools can be used LNS Alpha 312 Barfeed Hnodpfswxl Rlex Afnjh