Laser Cutting Machines - Fiber laser cutting

BLM ADIGE LT14 XL

Condition: ready for operation (used), Year of construction: 2014, operating hours: 48,274 h, pressing force: 326 t, number of axes: 6, This TRUMPF TruBend 7036 press brake was manufactured in 2014. It features a robust welded steel frame, electro-hydraulic top drive, and a 2D graphic control DA 69 system on a 10.4" color screen. The machine includes a CNC backgauge with 6 axes, hydraulic tool clamping, and CNC crowning for precise bending. Regularly serviced under a TRUMPF maintenance contract. Contact us for more information about this machine. • Free column clearance: 3680 mm • Installation height: 535 mm • Control system: 2d graphic control da 69 on windows with 10. 4" color screen • Electrical equipment: for three-phase current 400 v / 50 hz • The machine was serviced annually • Maintenance contract in place • Sturdy machine frame, welded all-steel construction • Press beam with high bending strength • Highly dynamic electromechanical direct drive (torque motor) • Electro-hydraulic top drive via proportional valves • Modern block hydraulics • Inductive length measuring system with temperature compensation • CNC backgauge system: 3-axis (X1, R1, Z1) and 6-axis options • Rack and pinion drive for X and R axes • Safe, front-accessible movement of stop fingers • Modufix top tool holder system, self-centering, manual clamping • Manual lower tool holder for EV dies, hardened, programmable offset • Integrated TRUMPF TASC 6000 control • Numerical workshop programming • Embedded Windows XPe operating system, Pentium M 1.1 GHz • 1 GB RAM • 15-inch touchscreen • Network-enabled, teleservice via modem • Control cabinet climate control • Side-hinged safety doors and rear protective cover • 2-button foot switch for standing or seated operation • Rear work area LED lighting • Front work area LED lighting • Ergonomics package: comfortable front work surface and footrest • 2 storage brackets and 2 document trays • 24000 operating hours, brakes replaced 2024 • Tools maintenanced by TRUMPF, all in tolerance Additional equipment • Backgauge system with 5 axes and control cabinet climate control • Upper tool clamping: hydraulic and hardened Bwodpfsx D D Hysx Acvok • Lower tool clamping: hydraulic • CNC Crowning • BendGuard safety device • Foot switch • 2x support consoles, front • 1x bending aid with 900 mm parking position • Table extension for base table / additional table Technical Specification Bending Length 1020 mm

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Ficep 1201 DE 601 Excalibur drilling machine for processing flat steel and profiles, equipped with a drilling unit that moves longitudinally. This machine has been fully cleaned and inspected. The drilling machine features a numerically controlled drilling unit with longitudinal movement (X-axis), adjustment range 0 - 15,000 mm, and an automatic tool changer with HSK A80 interface for 6 tool positions. Thanks to the 19 kW drill spindle drive, the machine is suitable for use with carbide drilling tools. Technical details: • Support for profiled and flat steel with guide rail and fixed table, total length 15 m • Mobile drilling unit for longitudinal positioning along workpieces • Horizontal drilling head with single drill spindle • Additional tool storage in the X-axis direction • Clamping system for securing materials • Position detection device • Maximum profile size: 1200 x 1200 mm • Number of drill spindles: 1 • Drilling diameter: 5 - 40 mm • Tapping: M6 - M30 • Drill spindle speed: 180 - 3000 rpm • Holder: HSK A 80 • Tool changer: 1 x 6 Bwedpfxov Iamzs Acvok For more information, please contact us.

Condition: excellent (used), Year of construction: 2011, Prima Industrie Platino 1530 laser cutting machine only 4300 hours cutting hours Bsdpfeivg Hgox Acvewk This Prima Industrie Platino 1530 laser cutting machine 4,0kW CO2 was manufactured in Italy in the year 2011 and installed at the end of 12/2011. PRIMACH 20 L control unit.

Condition: used, functionality: fully functional, Year of construction: 2010, operating hours: 7,900 h, control type: CNC control, degree of automation: automatic, controller manufacturer: Siemens, laser type: CO₂ laser, laser source manufacturer: Trumpf, laser hours: 7,850 h, laser power: 3,200 W, punching diameter: 76 mm, Equipment: centralized greasing system, cooling unit, dust extraction, emergency stop, foot remote control, fume extraction, nozzle changer, quick-change device, safety light barrier, Laser TruFlow 3200, including LensLine with optimized standby Nozzle changing device Multitool drive system "Multishear" function "Multibend" function Tapping function High-speed "Marking" / "Ribbing" function Engraving function Rolling and deburring function Softpunch function Active Die Stripline Repositioning with pneumatic cylinders Vibration-dampened installation Chip conveyor with container Bjdsx N Hyvepfx Acvswk Ball table work surface with brush inserts Blowing device SheetMaster (3000 x 1500) Automatic sheet separation system with lateral air blast Additional positioning guides for sheet size (2500 x 1250) Additional positioning guides for sheet size (2000 x 1000) Discharge control device GripMaster (3000 x 1500) Double trolleys with toothed belt drive (3000 x 1500) Loading and unloading unit Good part conveyor on punching side Good part conveyor on laser side Warehouse interface No. 21 RTC toolboxes incl. die holder plate

Condition: used, Make: Schiess Control: Conventional Location: Germany Major overhauls: 2009 new electric with new AC main motor, 2022 overhaul of the gearbox. Condition: under power, in good condition Chuck Ø: 9500 mm Swing Ø: 10500 mm Max. Workpiece Weight: 150 T Max. Working Height: 4500 mm Ram Vertical Travel: 2250 mm Chuck Speed: up to 7.35 rpm Machine Weight: aprox. 400 T Bwjdpjxpd Emofx Acvsk Left ram is currently dismantled but will be supplied together with the machine.

Condition: excellent (used), Year of construction: 2017, operating hours: 3,200 h, pressing force: 130 t, Space requirement: 11,500 mm x 10,000 mm + Increased installation height/lift + 230 mm + 4-axis backgauge system + Rear work area lighting + Front work area lighting - TruBend documentation Automation BendMaster (60) Standard equipment: BendMaster - Sturdy base frame and manipulator made of cast aluminum construction - Load capacity 60 kg, sheet plus gripper - Low-level floor track in welded construction - Sheet sensor for contour detection - Rotary feedthrough for quick gripper change Gripper coupling on the BendMaster - Sensor system for 4-axis backgauge system - Electric drives - Double sheet detection - NC regrip station - Vacuum generation for suction grippers Control - TRUMPF PC control with operator terminal - Teleservice via internet - Convenient operation: screen, mouse, keyboard Safety - Safety fence with access door Special equipment + Track extension to 10 m + Gripper change console + Modular vacuum gripper without separation (materials for 3 grippers) + Modular vacuum gripper with separation (materials for 3 grippers) + Clamp gripper with rotary axis + Sheet removal station with linear axis + Additional pallet for sheet removal station + Right-hand side door for safety fence (or left-hand side in combination with ToolMaster) Bedpfx Acsxayl Dovswk Machine - Robust machine frame entirely in steel construction - Press beam - Spherical mounting of pressure beam with inclined position - Electro-hydraulic upper drive system with 4-cylinder technology - Optical set-up and positioning assist with control valves - Generous free space for bending - Flat front covers - Block hydraulic system - Electronic pressure gauge - Measuring system with glass scale and spring-back compensation - Hydraulic oil in machine (lifetime lubrication) - Oil cooler - Electrical cabinet cooling via air-to-air heat exchanger - Modern machine design Backgauge System - 2-axis backgauge system, X and R axes Tool Clamping - Hydraulic upper tool clamping - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - CNC crowning Control - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock speed - 2 GB RAM - 15-inch touch screen - Network capability - Teleservice via internet Operation - Control panel with LCD keypad and foot switch - Communication rail - MobilControl Safety - Standard safety equipment - CE marking

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 0 h, machine/vehicle number: plate roll, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: MG EVO, controller model: EVO 4 AXIS, number of rollers: 4, roller (bottom) diameter: 140 mm, roller (top) diameter: 160 mm, side roll diameter: 150 mm, roller diameter: 200 mm, roller length: 2,050 mm, working width: 2,000 mm, working height: 700 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, overall weight: 2,200 kg, total length: 3,200 mm, total width: 1,100 mm, total height: 1,200 mm, power: 4 kW (5.44 HP), input voltage: 400 V, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 4 ROLL BRAND MG ITALY, HYDRAULIC MODEL M2006P EVO_CNC Bwodpfsw Dnd Sex Acvsk PLATE BENDING ROLL PLANETARY DESIGN DOUBLE PINCH PRE-BENDING CNC_EVO PROGRAMMABLE AUTOCALCULATION AUTOMATIC PLATE ROLLING Capacity: -Width of plate: 2000 mm -Thickness of plate rolling 6 mm -Thickness of plate pre-bending 4 mm Rolls -useful width mm. 2050 -Top roll mm. 160 - Lower roll mm. 140 Configuration installed: • Surface hardening of the four rolls, smooth finishing suitable for stainless plates rolling • Dual pre-pinch, with adjustable force upon the input of plate thickness • Conical bending hydraulic attachment - hardened contrast pad. • Power driven rolls rotation top/bottom gearbox axial direct drive hydraulic each roll. • Calibration system for re-rolling of welded shells rounding. • Console electric independent with centralized commands joysticks and CNC screen readout. • CNC controller on touch screen 15” , CAD/CAM interface 4 axis auto calculation software package. with digital readout of the axis for use in manual rolling, semiautomatic and fully automatic programmable. • Opening front side hydraulic drop-end to unload closed shells. • Variable working speed step-less axis interpolation. • Safety installation with emergency stop. • Instruction manuals for operation and service.

Condition: excellent (used), Year of construction: 2012, Model Amada HFE M2 220t 4m, 8 axis Press Brake Year 2012 Tonnage 220 tonnes Max. Bend Length 4280 mm Stroke Length 200 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Bwedpfjv S U Izex Acvek Oil Capacity 195L Motor Power Weight 17450 Kg Dimensions Machine Length 5070 mm Machine Depth 2075 mm Machine Height 3085 mm Distance Between Side Frames 3760mm Beam width 180 mm Table height 960 mm Open Height 470 mm Throat Depth 420 mm

Condition: good (used), Year of construction: 2000, table width: 1,000 mm, table length: 1,800 mm, ram plate width: 600 mm, total length: 25,000 mm, total width: 27,000 mm, total height: 47,000 mm, overall weight: 43,000 kg, die cushion stroke: 200 mm, Siemens Simatic OP 27 control system Light barrier Sick Bsdstiwgiopfx Acvswk Separate control cabinet Ritta Side passages Ground level installation

Condition: new, Timesavers Series 12 WW Bjdpjwqf U Uefx Acvowk The machine is equipped with two belt grinding stations; with station 1 you can perform pre-grinding to remove high burrs and splatter, and with station 2 you can achieve a surface finish on the part. The transport speed of the belts is continuously adjustable. The table opening can be adjusted from 0.8 to 100 mm.