Kopierer-Welt - Feeder

BDT SIS-330 Feeder

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 3392-014, Format (cm): 76 Gsdpfowmlc Dex Aayoca Equipment / Additional information: Side tables, air table, 1xreserve knife

Condition: used, Year of construction: 1998, Offset 2 color Shinohara 66-2 Year: 1998 Number of impressions (mio): 79 Machine control - Shinohara console Printing units - Number of printing unit(s): 2 - Straight machine - SAPC Semi Automatic Plate Change - Cooling system Gcsdpfx Aowahvajaysa - Dampening system: Shinohara Delivery - Standard delivery - Powder spray: OxyDry Accessories - Plate bender: on delivery Max. output (s/h): 11000 Max. sheet size (mm): 483 x 660 Min. sheet size (mm): 200 x 296 Max. paper thickness (mm): 0,4

Condition: excellent (used), Volt: 220-240VAC // Amps. 1.8 // Hz: 50/60 // Ph: 1 // Kw: 0.4 WITH DELIVERY BELT Gjdpfx Ajh Eibaeayoca Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin. Designed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 print machines irrespective of the feed system (overlapped/single-sheet feed). - Requires no mechanical alterations to the printing machine - No need for synchronization adjustments as controlled by laser technology - Very short set-up time allows economic use from 1000 envelops upwards - Easy to operate - The design of the feeder results in a forced overlap. The Stenz Feeder is thus not restricted in throughput - A minimum of wearing parts for extremely long service life - Already approved in thousands of different print machines - A Swiss quality product - Designed by printers for printers. Specifications: Speed: Limited by print machine Length: 115 cm Width: 50 cm Height: adjustable between Max. format size: 36.5 x 35 cm Max. pass-through width: 36.5 cm Electrical: 230 V, 50 Hz

Condition: excellent (used), Year of construction: 2003, Brochure production line Horizon VAC 100 A+M (year 2009) with stitching-folding station SPF 20A and trimmer FC 20A Gsdpev Sqr Nofx Aayoca

Condition: used, Year of construction: 1985, Cutting width: 760 mm Insertion depth: 760 m Working height (cutting height): 110 mm Table height: approx. 900 mm Machine dimensions (W×D×H): approx. 1,520 × 1,750 × 1,400 mm Pressure: 150–2,500 daN (infinitely adjustable) Machine weight: approx. 1,040 kg Gjdpoxyf Svjfx Aayoca short-term available

Condition: good (used), Year of construction: 2018, type of input current: AC, Excelagraphix 4800 corrugated printer The Xanté Excelagraphix 4800 digital printer will change everything you know about high-speed, corrugated printing. It features the revolutionary Memjet Waterfall™ printhead technology: over 3 billion (!!!) drops of ink per second, resulting in print speeds up to 8 times faster than traditional inkjet technologies. No drying time, prints are completely dry by the time the sheet leaves the machine. Short and medium run on demand corrugated packaging production High resolution 1600*1600 dpi prints at speeds up to 4sec/1m2. They offer an excellent alternative or complement to the low and medium volume production of cartons flexo and screen printing workflows. Low production costs, short lead times, flexible media handling. Versatile media handling Direct printable: -ofset papers, Gedpfx Aaouqx N Ajyoca -from paper, -cableplate, -carton box material, even pre-cut!!! -decoration and packaging materials up to 1,5 cm thickness -assembled finished box (laid out) -assembled paper bag Efficient and productive up to 10 A/0 prints per minute! The board media transfer system allows users to use a wide variety of media types (including extremely thick foam board and corrugated), enabling the rapid production of a wide range of unique advertising and packaging applications with variable media content! Keep the profits of your short-run packaging order with you. Use digital printing for optimal production of small and medium runs. The speed of the workflow ensures an immediate start of work, and the speed of production will convince you that you made the right choice: A/O size printing in 5 seconds! Maximum media thickness: 16 mm - Print corrugated boxes, POP Displays, quickly, in large quantities, digitally. The time and money saved by eliminating mould making ultimately means more profit for you. PUBLICATION Printing method: 5 Memjet inkjet printheads Print width: 106.7 cm (121.9 cm total media width) Ink colours: 5 colour channels in each printhead: CMYKK Print resolutions: 1600*1600 dpi, 1600*800 dpi Speed: 4-5 sec/1 fm depending on feed rate Media feeding: manual INKS AND MEDIA Ink type: water-based dye Ink tanks 5 pcs CMYKK 2L/pc Media: uncoated sheet papers, corrugated board Types of corrugated board: A, B, C, D, E, F, OR G corrugated board, single-sided, double-sided, single-wall, double-wall, or even triple-wall, boxed or glued together, flashed, up to 15.9 mm height. Min. / Max. Media length: 45,7 cm - 2,4 m Min. / Max. Media width: 30,5 cm - 121,9 cm VIEW Interface: gigabit ethernet, USB 3.0 Drive software: XANTÉ iQueue Ultimate Workflow: full colour management, instrumentless colour calibration, ejection, variable data printing, print cost calculation, digital file editing, barcode generation, placement in the print, etc. OPERATING ENVIRONMENT Dimensions: h: 2,1 m x m: 1,2 m x h: 2,1 m (with tray extender 2,5 m) Weight: 399 kg Electrical requirements: 230 V Operating temperature: 15-30 C' Humidity: 50%-80% RH Atmospheric pressure: 70 kPa - 106 kPa

Condition: refurbished (used), Year of construction: 2021, Brother GTX PRO DTG Printer Year 2021 Very good condition used machine, checked by professional Print: Approximately 55000 Support table included Printer overhauled, cleaned and tested Included : Ink around 40% (2+) Cleaning liquid full. Included with the used Brother GTX PRO Bulk : Gedsk Rkpnopfx Aayeca 5L Premium Dark Cotton Pre-Treatment, SK Color Dark Cotton; 1L of Premium Light Cotton Pre-Treatment, LIGHT Cotton by SK Color; 1L cleaning fluid for Brother GTX and GTX Pro CXS from SK Color; 100 DTF A3 sheets; 1 Kg of Premium DTF powder. Shipping not included

Condition: good (used), Uchida BC 10 Business Card Cutter The UCHIDA BC-10 Business Card Cutter is a business card cutting machine that works with any high quality digital photocopying or printing device to produce professionally cut business cards automatically, easily and quickly. Whether you are a small business or a large corporation producing hundreds of cards per day, the innovative innovations applied to the UCHIDA BC-10 will satisfy any need. - Designed exclusively for business cards from A4 paper upwards - Up to 100 business cards per minute - Simple and fast operation Specifications Processing speed: 10 sheets per minute (100 business cards) Paper size: A4 Paper type Offset, coated, glossy paper Tolerance ±0.1 mm Item condition: used Scope of delivery: as shown Gcedpfx Aoivd Aieayea More items - new and used - you will find in our store! International shipping costs on request!

Condition: good (used), Year of manufacture: 2017 Condition: functional - CMYK head replacement in 2022 plus one machine for spare parts Printing method Direct inkjet garment printer Machine size 55" (W) x 51" (D) x 21" (H) (1400mm x 1290mm x 535mm) Machine weight 260 lb (approx. 118 kg) Platen Sizes Maximum print size is 16" x 21" / 40.6cm x 53.3cm For a list of all available platen sizes, contact a Brother DTG Specialist. Included plate size 14" x 16" (35.6cm x 40.6cm) Ink Type Water Pigment Ink | C, M, Y, K, W Number of print heads 2 print heads / 8 ink channels Print resolution 1200 dpi x 1200 dpi Godpfx Aoufkb Eeayoca Print mode Single or double for CMYK. Background and highlight for white. Data output Printer driver (USB, output to file) Power supply AC 100V-240V, 50/60Hz ± 1Hz Power consumption 0.8A (average) (Reference: 0.3A - during circulation) Ink fixation The heat press can be used at 356°F (180°C) and a duration of 35 seconds. For higher volume production, it is recommended to use the belt furnace at 320°F (160°C) for three and a half minutes. Time and temperature may vary depending on the particular manufacturer's dryer used. Supported OS Windows® 7(32 bit/64 bit), Windows 8.1(32 bit/64 bit), Windows 10(32 bit/64 bit), Mac OS® X v10.11.x Interface USB2.0, LAN (10 BASE-T, 100 BASE-TX), USB Flash memory (under 32GB, FAT32 format) Conditions for driver operation 3GHz CPU (minimum recommendation), 5GB RAM Display resolution XGA(1024x769) (minimum recommendation) Recommended applications CorelDRAW® X7/X8, Adobe® Photoshop CS6/CC, Adobe® Illustrator CS6/CC, Adobe® Photoshop Elements 14/15, GTX Graphics Lab

Condition: good (used), Year of construction: 2002, machine/vehicle number: 0102002, Semi-automatic angle opening Very good condition 3 months functional guarantee Print format: 1000 mm x 1500 mm max. sheet size: 1050 mm x 1550 mm max. screen frame: 1370 mm x 1850 mm Squeegee pre-squeegee height adjustment: 40 mm Squeegee angle adjustment stepless: + / - 50 - 90 ° Gcjdpfxjrllhkj Aaysa Support bar height adjustment: 0 - 100 mm stepless Maximum material thickness: 100 mm Machine weight: approx. 1500 kg connected load: 400Volt/50HZ - 5KW Air connection: 6 bar options: pneumatic screen frame clamping Squeegee pressure compensation adjustable via pressure regulator Stainless steel pressure plate Blowing air device All data without guarantee