Baykal APHS 31440

Baykal APHS 31440

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Nwsdpfxsw Iq Ugs Adbjc Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Condition: used, Year of construction: 1998, machine/vehicle number: 100057, 1998 AMADA VIPROS 2510 KING The punching machine is in good condition, always serviced on time by Amada service. All documentation is included. This machine can be operated with a punching force of 196 kN. Made in Japan. The punching machine is still under power and can be tested at any time in Vilnius, Lithuania. Specification: Model: AMADA VIPROS 2510K Serial no: 100057 Year: 1998 Made in: Japan Punching force: 20 tons Stations: 31 Tools: included (RO 6; RO 6,5; RO 3; RE 30x5; RE 25x5; RE 80x5; RO 5; RO 3,5; RE 10x3; RE 10x5; RE 50x5; RE 8x12) Njdpfxom Ncayj Adbewc Maximum sheet thickness: 3 mm X-axis movement: 2500 mm Y axis travel: 1270 mm Weight: 11 000 kg Location: Vilnius, Lithuania Testable: Yes If you have any questions, please do not hesitate to contact us.

Condition: used, Year of construction: 2022, controller manufacturer: Sonstige, controller model: AMNC-3i, _____ Description: Control : Sonstige AMNC-3i Movement X/Y/Z : 3000/1500 mm Technical data Punching machine:EMK-3612MII (58) Punching force:300 kN Positioning accuracy:± 0.1 mm Number of tool stations:58 Machine frame:Bridge frame Machine table type:Brush table Punching drive:Servo-electric dual drive Travel range (X x Y):1525 x 3050 mm Control:AMNC-3i (21.5" screen size) Features :Punch & forming function :Good parts flap :scrap conveyor system Dimensions Length:5436 mm Nwedpfx Adsx I T Dxobjc Width:6212 mm Height:2342 mm Weight:21500 kg

Condition: good (used), functionality: fully functional, Year of construction: 1999, Press force 320 t Bending length 4100 mm Stroke 350 mm Total power requirement 32 kW Machine weight approx. 23,500 kg Space requirement approx. 4300x2600x3400 mm Nwsdexu Na Topfx Adbjc Equipment: -CNC control Amada Operator -Quick-change tool holder Amada -Bottom tool clamping Amada -Controlled axes: y1, y2, x, r, z1, z2 -Rear safety doors -Two-hand foot control

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, operating hours: 12,096 h, Amada hydraulic press brake type HFT 130-3 working width 3100 mm max. pressing force 130 tons CNC-controlled Y1 Y2 X and R axes CNC control CNC OP 2000 Fiessler light curtain Drive power 12.5 kW Weight 8200 kg Nsdpfx Adexhfuysbewc

Condition: good (used), functionality: fully functional, Year of construction: 2000, CNC press brake, 6 axes - Pressing force: 1,300 kN - Bending length: 3,060 mm - Number of axes: 6 programmable (X1, X2, R1, R2, Z1, Z2) - Y-axis rapid traverse: 200 mm/s - Y-axis working speed: 11 mm/s - Y-axis return: 135 mm/s - Travel speeds: X - 500 mm/s, R - 300 mm/s, Z - 1,000 mm/s - X-axis travel: 600 mm - Max. back gauge range X: 860 mm - R-axis travel: 250 mm - Y-axis stroke: 365 mm - Installation height: 535 mm - Y-axis tilt: ±10 mm - Bending length: 3,060 mm - Clear distance between uprights: 2,690 mm - Throat depth: 410 mm - Table width: 120 mm - Working height: 1,050 mm - Oil capacity: 250 l Dimensions: Njdpfx Adjx S H Uxsbewc Width: 3,640 mm, Depth: 2,210 mm, Height: 2,885 mm Weight: 12,950 kg The machine can be inspected under power!

Condition: excellent (used), Year of construction: 2012, Model Amada HFE M2 100t 3m, 4 axis Press Brake Year 2012 available end January 2026 Press Capacity (KN) 1000 Beam Length (mm) 3110 Distance Between Side Frames (mm) 2705 Throat Depth (mm) 420 Standard Stroke Length (mm) 200 Njdpox Hdthofx Adbjwc Standard Open Height (mm) 470 Beam Width (mm) 60 Table Height (mm) 960 Approach Speed (mm/s) 1-100 Bending Speed (mm/s) 1-10 Return Speed (mm) 1-100 Number of Controlled Axis 4 Length (mm) 4580 Depth (mm) 2450 Height (mm) 2685 Weight (kg) 6900

Year of construction: 2000, condition: like new (used), Used Edward Pearson pr6 100ton x 4metre multi axis cnc pressbrake for sale Pr6 100/4100 Make: Edwards Pearson Nwsdpfx Adog D Uapobec Model: PR 6 Pressure Reference Year / new: 2000 Total axis:6 – 4axis back gauge X R Z1 Z2 X1 – recently replaced / new amplifiers Free standing no pit required Capacity / bed size / tonnage: 4metre x 4100mm x 100ton Cnc control: Cybelec DNC 1200 PS/B Fully serviced with Bystronic uk – as attached per photo Complete with used tooling yet we can also quote for brand new tooling to fit this machine to produce your steel products. Delivery to your factory and installation complete with tuition with your operators can be arranged.

Condition: used, Year of construction: 2007, pressure 170 t chamfer lenght 3000 mm distance between columns 2750 mm Stroke beam 200 mm max. opening beam/table 520 mm C-recess 350 mm traveldistance X1+X2 cnc programmable 700 mm R1 and R2 axis controlled by cnc 250 mm Z1+Z2 axes controlled by cnc 0-2500 mm Quick speed,inspeed 100 mm/sec bendingspeed 0-10 mm/sec opening speed 100 mm/sec Number of working hours 36820 h length 3600 mm width 2200 mm height 2850 mm Nwjdpfxsxyzy Ne Adbec weight 12000 kg total power requirement 16,5 kW dimensions of the machine ca. 4x2,5x3 m Control Amada AMNC All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Condition: used, functionality: fully functional, Year of construction: 2025, input voltage: 380 V, input frequency: 50 Hz, laser power: 3,000 W, pipe length (max.): 6,000 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Hohe Geschwindigkeit · Hohe Präzision · Hohe Stabilität Diese Maschine verfügt über ein hochpräzises Spannsystem, das speziell für das Rohrschneiden entwickelt wurde. Dank hervorragender Abdichtung und Staubschutz bietet sie eine Spanngenauigkeit von ≤0,1 mm – ideal für die hochpräzise Bearbeitung kleiner Rohre. Das Spannfutter dreht sich mit bis zu 160 U/min und erreicht eine Beschleunigung von 1,5 G. Dies ermöglicht die hocheffiziente Bearbeitung von Rohren mit kleinem Durchmesser. Unterstützt automatisches oder halbautomatisches Laden. Ermöglicht mühelos intelligente und automatisierte Bearbeitung. Eine Maschine ersetzt drei Mitarbeiter. Nodewwi H Uspfx Adbowc