Electronics / Drive technology

Baumüller BUG2-60-30-B-003

Condition: used, Year of construction: 1979, functionality: fully functional, cutting diameter 440 mm weight of the machine ca. 780 kg Nodpfx Akjf Dwa Ujijwn +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Nwjdouz If Nepfx Akisn Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Technical Data Nwodoxtiunspfx Akion Grinding/Workpiece Diameter: up to approx. 300 mm (partially up to 350 mm) Grinding Length/Stroke: approx. 550 mm (slide travel) Module range (for hobbing cutter resharpening): min. module approx. 0.5 to max. module approx. 25 Number of flutes: typically 1–99 pieces (depending on tool set) Grinding wheel diameter: approx. 150–300 mm Grinding wheel speed: up to about 2,700 rpm Centre distance (workpiece spindle): typical range 400–800 mm Swivel/Pitch range: e.g. grinding wheel head swivel 0–15° Machine weight and space requirement: approx. 4.2–4.9 t weight; space approx. 3 × 2.6 × 2.3 m Electrical data: operating voltage e.g. 380 V three-phase, control 24 V, auxiliary voltage 220 V

Condition: excellent (used), Year of construction: 1988, TECHNICAL DATA. Max. clamping length: 90 mm Tool clamping height with tapered shank: 50 mm Tool clamping height with straight shank: 45 mm Max. helix angle: 45° Nsdpfxewwkaco Akijwn Number of clamping positions: 1 to 99 Max. slide travel: 550 mm Max. grinding wheel diameter: 350 mm Min. grinding wheel diameter: 150 mm Grinding wheel speed (variable): up to 2700 rpm Swivel range of grinding spindle axis: 0° to 15° Grinding slide feed rate (variable): 0.05 to 16 mm/min (with 3rd and 4th axis: 0.05 to 8 mm/min) Workpiece spindle taper: ISO Taper No. 40 Grinding Wheel Data CBN and diamond cup grinding wheel: Ø200 mm → Min. DFF: 66 (3rd axis), 76 (4th axis) Ø250 mm → Min. DFF: 16 (3rd axis), 26 (4th axis) CBN-ES cone grinding wheel: Ø200 mm → Min. DFF: 50 (3rd axis), 60 (4th axis) Ø250 mm → Min. DFF: 0 (3rd axis), 10 (4th axis)

Condition: ready for operation (used), Year of construction: 2015, operating hours: 48,086 h, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 3, This 3-axis DMG MORI CTX Beta 800 4a was manufactured in 2015. It features a Siemens 840 D control, a main spindle and counter spindle, and a bar machine package for efficient operations. Ideal for complex turning and milling tasks, it includes a hinge type conveyor and a coolant system with multiple pressure settings. If you are looking to get high-quality turning capabilities, consider the DMG MORI CTX Beta 800 4a machine we have for sale. Located in Germany, contact us for more information. • IMS 76 main spindle • Counter spindle • 2 x 16-station Sauter star turret VID 30 • Siemens 840D control • Eccentric turning and milling capability • TC alternating speed • Glass scales on X1, X2, X3, Y1, Z1, Z2, Z3 Nwjdpfx Akox D Ndwjien • Counter spindle slide with cross stroke, C3, tailstock Additional equipment • 980 L coolant system with 8 bar/20 L and 20 bar/40 L high-pressure, M-function programmable • Paper band filter • Chuck rinsing device for main (outside) • Chuck rinsing device for counter (outside) • Coolant spray gun • Hinge-type chip conveyor • Bar machine package (bar feeder) • Window cleaning with compressed air • SK package for aluminum machining • Tool breakage monitoring Artis CTM

Condition: good (used), Year of construction: 2007, functionality: fully functional, turning length: 320 mm, turning diameter: 32 mm, overall weight: 2,850 kg, Citizen C32-VIII Year 2007 LNS Express 332 Bar Feeder Chip Conveyor Nwodpfxjwanb Ne Akijn Parts Conveyor - Available Now -

Year of construction: 1990, condition: used, machine/vehicle number: 102-014-3150, disk of circular saw-Ø: 400 mm cutting area at 90° round: 130 mm cutting area at 90° square: 210 x 80 mm cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 160 x 80 mm cutting speed: 11/22 m/min space needed: 2650 x 1450 x 1980 mm Nwsdodbp Eqopfx Akion weight: ca. 1100 kg

Condition: used, TECHNICAL DETAILS - Travels on X/Y/Z axes : 400 x 300 x 350 [mm] - Rapid traverses rates (X/Y/Z) : 6 / 6 / 15 [m/min] - Min./max. distance between table and chuck : 170 / 520 [mm] - Max. part dimensions : 820 x 580 x 250 [mm] - Max. part weight : 800 [kg] - Max. electrode weight : 50 [kg] - C axis : 0 - 100 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 9.1 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 4.700 x 2.750 [mm] - Machine height : 2.680 [mm] Njdpfx Ajwl Rh Nekiewn - Machine weight : 3.830 [kg] - Number of working hours : 13659 [h] EQUIPMENT - CNC : AGIEVISION 5 - Workpiece loading / unloading robot - Spindle nose : EROWA - Dielectric capacity : 600 [l]

Condition: excellent (used), Year of construction: 2019, XYZ UMC-5X 5 Axis CNC Vertical Machining Centre Heidenhain iTNC 640 HSCI Control Model UMC-5X Control Heidenhain iTNC 640 HSCI X Axis Travel 600 mm Y Axis Travel 600 mm Z Axis Travel 500 mm A Axis Travel +120° / -120° C Axis Travel 360° Table Size 600 mm Diameter Maximum Table Load 600 kg Spindle Speed 24,000 rpm Direct Drive Spindle Taper BBT40 Rapid Traverse 36 m/min Feed Rate 1 - 36,000 mm/min Tool Changer 60 Station Automatic Maximum Tool Length 300 mm Through Spindle Coolant 70 Bar Machine Weight 9,500 kg Nwedpfxezi Awhe Akisn Machine Fitted With: Heidenhain iTNC 640 HSCI CNC Control, 24,000 rpm Direct Drive High Speed Spindle (20kW S6 Rated), 60 Station Automatic Tool Changer, 70 Bar Through Spindle Coolant, Fixed Roof for High Pressure Coolant System, Renishaw RMP600 Strain Gauge Wireless Workpiece Probe, Laser Tool Setting System, Kinematic High Accuracy Machine Setup, Kinematic Reference Ball, Thermal Spindle Compensation, Linear Scales on X, Y & Z Axes, Direct Drive C Axis Rotary Table, Swarf Conveyor & Bin. Features: Simultaneous 5 Axis Machining Centre, Gantry Frame Construction, Direct Drive High Torque Rotary Table, High Precision Linear Roller Guideways, Dynamic Collision Monitoring, High Accuracy Machine with Linear Scales, Ideal for Aerospace, Medical, Precision Engineering & Complex Multi-Sided Components. For sale with Jet Machinery Ltd Jet Machinery Stock No: TBC Machine Serial Number: TBC Cost: £120,000.00 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to inspect the machine prior to purchase. Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2021, Frequency converter, frequency transformer, drive converter, controller, variable speed drive, inverter -Manufacturer: Schneider Electric, Altivar 630 frequency converter Nwjdpfxsxlzibs Akisn -Type: ATV630D90N4 -Power: 90 kW -Input: 380-480V / 50/60Hz / 156 A Output: 380-480V / 0-500 Hz / 173 A Quantity: 1 piece available -Dimensions: 800/290/325 mm -Weight: 55 kg