Electric motor for electric forklifts 75 V

Balkancar ET6,3/7,5/14

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. Isdpfx Agjfn Nddj Uoht T.S.W.C. 30.20 Dry bulkhead Dimensions: 3000 x 2000 mm W X H + Fan in the height Air capacity: 10.800 m³ / h Motor: 2,20 kW ex-proof Exhaust air pipe: 500 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+180,- EUR net) Options/additional price for: Paintstop filter mat terminal strip: 180,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Condition: used, 5tSWF Krantechnik GmbH Iedpfx Agjdc A R Te Ueht

Condition: like new (used), turning diameter: 1,500 mm, MAXIMUM WORK DIAMETER : 1600 mm. MAXIMUM WORKING LENGTH : 3000 mm. Ihedpfxjr Ui R Ns Ag Uot DIAMETER OF LANTERN SHAFT : 83 mm. OUR MACHINE IS ACTIVE WITHOUT ANY PROBLEMS ALL REVOLUTIONS AND AUTOMATICS ARE IN VERY GOOD CONDITION

Year of construction: 2012, condition: good (used), machine/vehicle number: ENOG, DEMAG KBK crane headliner crane runway dimensions approx. 8x4m Payload / lifting load 250 KG - 0.25to Iodomqf Nfepfx Ag Uoht Technical data of the system: Crane runway made from Demag KBK1+2 rails The system is delivered complete: KBK rails, rail connectors, trolleys, end plates, cable carriers, holders/hangers, etc. incl. Demag DC-COM 250KG chain hoist Crane is dismantled and available immediately Used condition, see pictures Item location is 75053 Gondelsheim Dispatch by forwarding agent or pick-up only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Other KBK systems are also available. Payload 125KG - 1600KG Please inquire about your crane runway with cantilever load and dimensions.

Condition: used, Clamping plate, marking-out plate, measuring plate, measuring table, welding table, welding table, straightening plate -Clamping plate comes: from a measuring machine -Width: 1335mm Ihodpfxjfc T Tqo Ag Ujt -Length: 3000mm -Height: 250mm -Plate thickness: 40 mm -Plate is with: support ribs -with: 4x adjustable feet -Number: 1 piece available -Transport dimensions: 3000/1335/H750 mm -Weight: 2749 kg

Year of construction: 2012, condition: excellent (used), machine/vehicle number: MBHF-KBK1, DEMAG KBK crane sky crane track dimensions approx. 12m x 3.5m Ihedpfx Agepiarne Uet Please inquire about other dimensions! Payload / lifting load 125 KG - 0.125ton Technical data of the system: Crane track made from Demag KBK1 rails The system is delivered complete: KBK rails, rail connectors, chassis, end plates, cable drag, power supply, holders/suspenders etc. including 1 bridge with 125KG Demag DC-COM chain hoist Crane is dismantled and available immediately Very good used condition, see pictures Item location is 75053 Gondelsheim Shipping by courier or collection only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Other KBK systems are also available. Payload 125KG - 1600KG Please ask for your crane runway with cantilever capacity and dimensions.

Condition: new, Year of construction: 2024, ✅ New goods ✅ Top price ✅ Immediately available ✅ Shipping possible ◾ SCHORR electric high lift truck ◾ Model RR12HH with 3500mm lifting height ◾ Low maintenance and smooth running ◾ Including 24V batteries and charging station ◾ 1.2t / 1200kg load capacity ◾ Top price-performance ratio ◾ AVAILABLE IMMEDIATELY! Gross price: 3.399,00€ incl. VAT Isdpfx Agoidqr Ss Ueht Net price: 2.856,30€ excl. VAT The electric high lift trucks from SCHORR offer an excellent price-performance ratio. The off-centre drive unit allows a small turning radius with best all-round visibility. Each model is equipped with a multifunction tiller which displays the current battery level and can be started via the ignition lock. The tiller can be operated with both hands and also has a worm mode. The design of the pallet truck is both robust and easy to maintain; impact-prone areas are equipped with yielding plastic. The emergency stop switch is centrally located for easy access at all times. The lift trucks are equipped with tandem load rollers as standard, which overcome uneven surfaces such as paving stones with low noise and vibration. TECHNICAL DATA see picture Further data and information on request, we look forward to your call or message!

Condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump, universal power pack Iodpfxjf Tdt Ij Ag Uoht -Manufacturer: HL, hydraulic unit for hydraulic punch -Type: DK52 1-6-250P-391K -Motor: Junginger 5.5 kW/1455 rpm -Nominal pressure: bar -Liter output: l/min -Pressure display: up to 250 bar -Pressure accumulator: Hydac 2.5 liters -Hydraulic tank/filter/valves: see pictures -Dimensions: 540/630/H1210 mm -Weight: 198 kg

Condition: new, Year of construction: 2024, Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Technical data for the shelf trolley: Iodpfxodb N Hms Ag Usht Manufacturer: LPR Type: 600 01x Shelf trolley, new Material color: blue / orange Total height incl. castors: 2,150 mm Total width: 1,550 mm Total depth: 600 mm Number of levels: 03 pcs. Consisting of each: 02x shelf uprights, new Material color: blue Frame profile dimensions: 50 x 50 mm incl. cross and diagonal braces, metal base plates, plastic Cover caps The stands are pre-assembled (bolted framework) 2,000 mm high 600 mm deep 06x workbench crossbars, new Material color: orange Design: stepped crossbar Clear width: 1,450 mm Profile dimensions: 80 x 50 mm Shelf load 300 kg with evenly distributed load 12x safety pins, new To secure the length supports against unintentional lifting out 03 x insertion sockets, second choice used Thickness: 22 mm Dimension: 1,430 x 545 mm 02x double-stop swivel castors, new 02x swivel castors, new 08x machine screws: M8 x 20 mm 08x Nuts: M8 08x washers: The pictures serve to illustrate the material. The material color may vary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3 - 5 working days. Our services at a glance: (Prices on request) - Assembly and installation Our general assembly conditions must be observed - Shelf inspection Rack inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 Visual inspection for all racking systems - Delivery with our own fleet of vehicles (without unloading)

Condition: excellent (used), functionality: fully functional, Year of construction: 1984, Loading capacity: max. 300 Kg. Ijdpfx Agef S I I Ho Ueht Diameter of decoiler: 1.000 mm Diameter of spool: max. 900 mm Inside diam of spool: 240 - 560 mm Hight of spool: max. 180 mm