Crane magnet, mechanically switchable lifting magnet, mechanical load magnet

BAKKER MAGNETICS BM 400 BM 50101

Condition: used, Year of construction: 2004, pressure 80 t chamfer lenght 2550 mm distance between columns 2050 mm Stroke beam 350 mm max. opening beam/table 620 mm C-recess 420 mm traveldistance X1+X2 cnc programmable 700 mm Bwodsxyzzaopfx Acvek Z1+Z2 axes controlled by cnc 0-2000 mm max. distance R-axes 200 mm Quick speed,inspeed 100 mm/sec bendingspeed 0-10 mm/sec opening speed 100 mm/sec Number of working hours 24000 h length 3380 mm width 1800 mm height 2750 mm weight 6100 kg total power requirement 9 kW dimensions of the machine ca. 3x2x2,5 m All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Condition: used, sweeping width 800 tenb. container volume 114 l total power requirement 3,0 kW 2759 m²/h max. 5232 m²/h Sweeper - scrubber dryer Operating hours: approx. 400 hours Bodpeg Ti Ihsfx Acvjwk incl. 4x brush + charger including new battery pack (consisting of 6x gel battery) !!

Condition: good (used), Year of construction: 2002, machine/vehicle number: V020113, operating hours: 43,000 h, AMADA MODEL HFT 8025 80 tons capacity x 2500 bending length hydraulic downstroking press brake complete with cnc control, Model Amada HFT 8025 downstoke CNC Press brake Year 2002 Bwodpfeuwktnex Acvsk Tonnage 80 KN Controlled Axis Y1, Y2, X, R Max. Bend Length 2500 mm Open height 470 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 9kw Weight 5750 kg Bed Length 2500 mm Bed Width 180 mm Open Height 470 mm Throat Depth 420 mm CNC Control

Condition: used, • Load capacity 350 kg • 6 vacuum suction cups, 250 mm diameter, adjustable • Vacuum lifter can rotate 90° and tilt 90° • Suction cups with guide tube and electric trolley • 4 units available, brand new and unused • Immediately available IV: + Design Standards 1. The construction of the unit strictly complies with European CE standard EN13155:2016, American ASME (Mechanical Engineering Association) B30-20-2006, and German UVVI8 regulations. The key design parameters exceed the requirements of the aforementioned standards. Bwsdpoxnvq Eofx Acvsk 2. Safety factor: The main structure features a factor of 4.0, vacuum safety level is 65%, and the standard safety level is 85%, which is 20% above the standard safety requirement. V+ Equipment Inspection and Standards 1. General Check that all materials are complete, inspect if the equipment exterior is painted or scratched, check for damage to the suction cups and pipes. 2. Pre-shipment Inspection © Equipment suction test © Equipment pressure holding test © Alarm system test © Various control components • Price on request

Condition: like new (used), Year of construction: 2004, AMADA MODEL HFT 8025 80 tons capacity x 2500 bending length hydraulic downstroking press brake complete with CD 2000 4 AXIS colour graphic cnc control, Bjdpeu A Dgrofx Acvswk ERWIN SICK machine mounted electronic guards , side and rear interlocked fencing Model Amada HFT 8025 downstoke CNC Press brake Year 2004 Tonnage 100 KN Type CD 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 2500 mm Open height 470 mm Stroke Length 350 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 7.5kw Weight 6100 kg Bed Length 2500 mm Bed Width 60 mm Open Height 470 mm Throat Depth 420 mm CNC Control Backguage Stoke (X axis) 700 mm/s Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: used, Year of construction: 1998, machine/vehicle number: 100057, 1998 AMADA VIPROS 2510 KING The punching machine is in good condition, always serviced on time by Amada service. All documentation is included. This machine can be operated with a punching force of 196 kN. Made in Japan. The punching machine is still under power and can be tested at any time in Vilnius, Lithuania. Bwsdpfx Acjm Ncaysvjk Specification: Model: AMADA VIPROS 2510K Serial no: 100057 Year: 1998 Made in: Japan Punching force: 20 tons Stations: 31 Tools: included (RO 6; RO 6,5; RO 3; RE 30x5; RE 25x5; RE 80x5; RO 5; RO 3,5; RE 10x3; RE 10x5; RE 50x5; RE 8x12) Maximum sheet thickness: 3 mm X-axis movement: 2500 mm Y axis travel: 1270 mm Weight: 11 000 kg Location: Vilnius, Lithuania Testable: Yes If you have any questions, please do not hesitate to contact us.

Year of construction: 2016, condition: used, MEP cutting & bending machine, SYNTAX 28 Single bar: ∅10 - ∅28 mm (#3 - #8) Double bars: up to ∅20 mm (#6) • Bar presence detector • Multifunction feeding: gripper and feed rollers Bwjdpfx Acjxl Avvsvok • Dual shears • Bending pins accordingly to international rules Video disclaimer: This video is the manufacturer's promotional demonstration for the SYNTAX 28 model. It does not show the specific line currently for sale. Single bar: ∅10 - ∅28 mm (#3 - #8) Double bars: Up to ∅20 mm (#6)

Condition: good (used), Year of construction: 1995, Double girder traveling crane, bridge crane, overhead crane, assembly crane, workstation crane, ceiling-mounted traveling crane, traveling crane, crane system Bwsdpfxsb A Ny Es Acvek -with 2x electric cable winches -Load capacity: 2 x 1600 kg -Bridge load capacity: 3.2 tons -Wingspan: 6.4 m -Hallway service -Dimensions: 2000/6400/H1000 mm -Weight: approx. 2000 kg

Year of construction: 1994, condition: used, max. temperature 1100 Grad voltage 230 V output 3 kw range - high tensile Innen 295x230x125 mm Bsdpfothr Ncex Acvowk

Condition: used, Powder Coating Plant - Automatic The plant moves with conveyor system. The material to be powder coated is hung on the line, the system automatically follows the steps below and powder coats the material after cleaning it. The best project suitable for the existing facility is made. Special design is made according to the customer's product and needs. Bjdpfx Aov Npa Hecvewk