Laser cutting machine

BAISON Laser K12C 3kW

Condition: as good as new (ex-display), Year of construction: 2021, machine/vehicle number: 06 61 218, Comm. no.: Lg 32821 Single side decoiler BBT ABH 2000/400 exhibition machine, unused machine no.: 06 62 218 year of manufacture: 2021 Technical data load capacity approx. max. 2.000 kg strip width max. 400 mm Hodpfx Aog U Utvjcvjk Coil inner diameter approx. 450 to 520 mm Coil outer diameter max. 1,500 mm Unwinding speed approx. 2 to 15 min.-1 With adjustable drive and loop control via ultrasonic sensor (analog). Drive by frequency-controlled three-phase geared motor. Spreading of the support segments manually by means of hand crank via joints Number of supporting segments 3 Coil side guide via strong limiting arms, clampable. Reel stand in strong box construction as welded design. construction. Additional equipment: Shutdown "belt loop too small" by antenna switch, attached to the column of the bottom housing of the loop control. Infinitely adjustable in height. Tape side guide at the bottom housing of the loop control, by means of lateral guide rods. The passage width is continuously adjustable.

Condition: good (used), Year of construction: 1989, 2-color "straight" offset machine with low-stack explanation; 48x66cm, last modified type of this model (= best) Hjdpfxstyqhqe Acvek

Condition: used, Year of construction: 2021, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, feed length X-axis: 1,270 mm, feed length Y-axis: 508 mm, feed length Z-axis: 635 mm, feed rate X-axis: 16 m/min, feed rate Y-axis: 16 m/min, feed rate Z-axis: 16 m/min, nominal power (apparent): 26 kVA, torque: 122 Nm, controller manufacturer: HAAS, Used Machining Center Brand: HAAS Model: VF-4 Year: 07/2021 Serial number: 1183245 Operating hours: Spindle on time: 6,000h Specifications: - Travels (X, Y, Z): 1270mm, 508mm, 635mm - Spindle-to-table distance (Min. - Max.): 107 - 742mm - Spindle speed: 8100 rpm - Spindle taper: ISO 40 - HAAS CNC Control - HaasDrop (for wireless file transfer to CNC) - Rigid tapping; synchronized tapping, with integrated tapping cycles and up to 8 retract speeds. - Safe Run; a HAAS Control software function that reduces the risk of significant damage in case the machine is impacted. - Tool changer carousel: 20 tools - Includes early power-failure detection module. - Coolant tank: 208 liters with coolant kit - Variable-flow coolant pump allows control of coolant flow and pressure via M-codes. - Maximum tool diameter: 89mm (adjacent tool slots filled) - Maximum tool weight: 5.4kg - Table dimensions: 1321 x 495mm - Maximum table load: 1588kg - Maximum rapid traverse (all axes): 25.4 m/min Included options: - Preparation for through-spindle coolant - Auger-type chip conveyor Hodpfxjxqct Se Acvsk - Programmable coolant nozzle, multi-position device that automatically and precisely directs coolant to the cutting tool

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, B2 sheet-fed inkjet press including: • Max sheet size: 750 mm x 585 mm • Speed: 3600 B2 sheets/hour • 4 colour • Inline primer • With full service contract • XMF DFE workflow • 720.000 prints only (sheets) • Packaging option for 600 micron board Hodpfx Acoyidg Nsvsk

Condition: new, functionality: fully functional, Year of construction: 2023, laser power: 3,000 W, power: 3,000 kW (4,078.86 HP), input voltage: 380 V, input frequency: 50 Hz, type of cooling: water, total length: 6,000 mm, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, NS-6022HG Tube laser cutting machine 3kw 3 Chuck Professional Pipe Laser Cutting Machine Hedpfewu Rm Rsx Acvek with automatic loading system with 6m automatic unloading with Chinese 3D bevel head-BLT tubes T CE Anti-radiation glass protective guards AVR KIT OF NOZZLE, LENS ETC(SPCS FOR EACH) Series: NS-HG Type: Three chucks Groove function: Standard Power: 3KW Maximum pipe length: 7000mm Round pipe: Φ15mm-Φ220mm Square pipe: 15mm*15mm~150mm*150mm Rectangular pipe: 30*20mm~160*80mm Oval tube/flatoval tube: Short axis≥15mm, long axis ≤ 210mm Channel steel: Max20# I-beam: Max18# H steel: Max175*90mm Maximum acceleration: 1.0G Chuck maximum speed: 100r/min Machine weight: 10t Power supply specification: 380VAC, 50Hz Standard: Support servo (groove), dust prevention (Y axis), dust prevention (X axis), dust prevention (Z axis), safety fence (light curtain), zero tail material, cutting area dust removal, rear card hollow dust removal

Year of construction: 2013, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE WITH PALLET CHANGER and LOADING/UNLOADING SYSTEM X-AXIS TRAVEL: 3270 mm Y-AXIS TRAVEL: 1550 mm Z-AXIS TRAVEL: 100 mm Hedpfxovhc S Ho Acvjk WORKING AREA: 3070 x 1550 mm ADMITTED LOAD ON TABLE: 920 Kg SOURCE: AJ2000 Fiber ; 2000 W CONTROL UNIT: AMADA AMNC3i WEIGHT: 11200 Kg OVERALL DIMENSIONS: 10028 x 2900 x 2000 mm NOTE: WITH LOADING/UNLOADING SYSTEM LKI 3015FLC-AJ YOM 2013; AUTOMATIC NOZZLE CHANGE

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 70,000 h, control type: CNC control, degree of automation: semi-automatic, laser type: CO₂ laser, laser source manufacturer: Mitsubishi, laser hours: 14,000 h, laser power: 4,000 W, laser wavelength: 10,600 nm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, table length: 3,050 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,020 mm, travel distance Y-axis: 1,520 mm, travel distance Z-axis: 50 mm, power: 4 kW (5.44 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, overall weight: 12,000 kg, total length: 12,000 mm, total width: 3,000 mm, total height: 2,500 mm, year of last overhaul: 2023, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Machine: AMADA LC-3015 X1 NT Laser resonator: ML40CFX / 4KW Extraction system: Herding - Delta Comp 1500-6/9 SB Cooler: Riedel - PC 1001.1MS5.I Operating hours: see picture Hjdpfxou Stk Es Acvjk Last maintenance 10/2023

Condition: new, carrying capacity 500 kg number of suction cups 6 suction cup dia. 215 mm Vacuum lifter VH 6-500 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm - 6x Springy, articulating and adjustable suction cup holders - 6x suction cups Ø 215 mm, the seal can be separated in case of wear whose metal supports can be changed inexpensively and without tools - 6x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: * with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. * is routed to the lifting device next to the load chain. - Low-maintenance, very high-quality, dry-running rotary vane vacuum pump a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - Electrical connection: 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and Hjdpfx Asq Sc Auocvok CEE plug (16 A). Integrated into the control with isolating transformer (necessary if the vacuum lifter is connected via the crane trolley and this has no neutral conductor) - Operating handle can be extended to 1,000 mm from the center of the traverse. Sturdy sheet metal bag for your crane control incl. at no extra charge. - Operation "suction / release" using manual slide valve: The wear-free and very robust manual slide valve ensures safe Suction and release after pressing the release button. (twice loosening according to EN 13155) - Control and safety device for vacuum lifters: * Robust control box. * Contactor circuit for the vacuum pump. * Safety warning device with audible alarm. * Vacuum gauge with danger zone indicator. * Large vacuum storage tank with safety check valve * Double actuation when releasing the load. - Fine dust filter to protect the vacuum pump - Detailed and easy to understand documentation. One year warranty against material and manufacturing defects One-shift operation (without wearing parts). Initial test UVV 18, VBG 9a with CE declaration of conformity - according to EN 13155 - Packing for truck transport.

Condition: ready for operation (used), Year of construction: 2015, Working container volume: 200 l Usable volume: 125 l Max. workpiece (diagonal): 170 mm Screen area: 2190 cm² Hsdpfxewcd Nzj Acvok Max. centrifugal force: 49,000 N Coating partially damaged. There are 2 units available!

Condition: new, Year of construction: 2025, -TFON Leveltech® Leveling Machine. -The TFON Leveltech® is a robust and precise leveling machine designed to handle a wide range of material thicknesses with efficiency and ease. Engineered for reliability and performance, it ensures flat, smooth surfaces on metal sheets and strips to meet stringent quality standards Key Specifications: -Material Thickness: 1 mm – 30 mm. -Maximum Material Width: 1,600 mm -Minimum Material Length: 145 mm -Quick Change System for Straightening Rollers: Standard Hodpfx Aokyrphjcvjk -Flattening Gap Adjustment: Servo Hydraulic with PLC Control. -Machine Dimensions (L × W × H): 5,465 × 6,735 × 2,300 mm. -Total Weight: 40.000 kg