5 axes universal gantry center

AXA VPC 45-U

Condition: excellent (used), Year of construction: 2014, operating hours: 40,000 h, functionality: fully functional, I am pleased to offer you a very well-maintained, nearly new AXA VPC 45 U. The machine is available immediately. An on-site inspection under power and in operation is possible at any time, and video footage is available. Machine hours (ON): approx. 40,000 Spindle hours (ON): approx. 25,000 Travel ranges (linear axes): X-axis: 2,940 mm Y-axis: 1,400 mm Z-axis: 900 mm 5-axis simultaneous machining: This machine is a true 5-axis machining center, enabling simultaneous 5-axis milling with X/Y/Z + B-axis (stepless swivel head) + C-axis (NC rotary table). This allows workpieces to be machined in a single setup with continuous movement from various spatial orientations. Machine (basic data) Machine type: Vertical gantry machining center Manufacturer: AXA Entwicklungs- und Maschinenbau GmbH Model: VPC 45 U Year of manufacture: 2014 Dodpeyh Nrzsfx Afnjkh General technical data Overall length: 6,800 mm Overall width: 3,600 mm Overall height: 4,100 mm Total weight: 29 t Electrical data Connection voltage: 3×400 V / 230 V / N / PE, 50 Hz Connected load: 69 kVA Main fuse: max. 125 A Control voltage: 24 V Spindle Spindle design: Hollow shaft motor, water-cooled Speed range: 30–10,000 rpm Tool holder: SK40 Drive motor: DME 112 AL-4FGS (Kessler) Max. power at 40% duty cycle: 40.0 kW Max. power at 100% duty cycle: 26.6 kW Max. torque at 40% duty cycle: 191.0 Nm Max. torque at 100% duty cycle: 127.0 Nm NC rotary table Rotary table: RTA 6S-1500 Table diameter: Ø 1,500 mm Weight: 2,700 kg Max. payload (vertical rotary axis): 10,000 kg Tool changer Tool changer: Type M Number of tools: 100

Condition: used, x-travel 1050 mm y-travel 600 mm z-travel 600 mm control Fanuc weight of the machine ca. 7200 kg Dksdpfx Afsvnh Umsnsh

Condition: excellent (used), functionality: fully functional, turning diameter: 1,000 mm, turning length: 8,000 mm, total length: 10,500 mm, A used lathe from the Italian manufacturer Leopolod Pontiggia, model NH 500, is for sale. Technical specifications: Turning diameter over bed: 1,000 mm Turning length: 8,000 mm Extensive equipment as in the photos: Dodev Epigopfx Afnskh 1 x 3-jaw chuck 1 x 4-jaw chuck 1 x steady rest + various adapters

Condition: good (used), Year of construction: 2000, machine/vehicle number: 13639, Control Heidenhain X-Way 1,200 mm Y-way 800 mm Z-way 500 mm Main spindle: Speed 16,000 rpm Drive power - main spindle 17 kW Spindle Tool holder Type HSK63 Spindle diameter in front. Bearing 70 mm Upgraded Tool changer Size: 100 Dedpfx Afjinh Rqsnekh Swing round table: Round table diameter 800 mm Swivel range A: -15 / + 97° rotatable C: 360° max. table load approx. 1,000 kg max. tool diameter 80 mm max. tool byway. with free neighbor box. 125 mm max. tool length 300 mm max. tool weight 8 kg Feeds: Rapid response ( X / Y / Z ) 30 m/min Total power requirement 31 kVA Machine weight 15 tons Space requirements approx. 6.0 x 5.0 x 3.6 m other equipment - Documentation - Chip conveyors - electronic heat compensation Y- + Z-axis

Condition: used, Year of construction: 1994, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Jobs 5-axis milling machine. Model Jomach 143. CNC Fidia. Year 1994. Travels: X4000 Y2700 Z1250. A axis 190°. C axis continuous. B axis. W axis. Price: €85,000. Dedpfoxr I Scjx Afnokh

Condition: excellent (used), Year of construction: 2017, operating hours: 35,000 h, functionality: fully functional, Year of manufacture: 2017 Commissioning: 06-2017 Spindle hours: approx. 8,000 Control: Mazatrol Smooth X 5-axis simultaneous machining Maximum turning diameter: 658 mm Maximum turning length: 1,519 mm Travel paths: - X-axis: 615 mm - Y-axis: 250 mm - Z-axis: 1,585 mm - W-axis: 1,574 mm - B-axis: -30° to 210° Rapid traverse: - X/Y/Z/W: 50/40/50/30 m/min Main spindle: - Drive power: 30 kW - Maximum spindle speed: 4,000 rpm - C-axis - Max. bar capacity: 80 mm Sub spindle: - Drive power: 26 kW - Maximum spindle speed: 4,000 rpm - C-axis Milling spindle: - Drive power: 24 kW (oil-air lubrication) - Maximum spindle speed: 12,000 rpm - B-axis: 0.0001° - Capto C6 Tool magazine / ATC: - 72 tool stations - Max. tool diameter: 90/125 mm - Max. tool length: 400 mm - Max. tool weight: 12 kg Special equipment: - Mayfran Consep 2000 II chip conveyor, dual change filter - Preparation for high pressure coolant (IKZ) 70 bar - 70 bar high pressure pump, 7 pressure stages - Air blow device at upper turret - Interface for bar feeder - Automatic parts catcher (D:80 x L:150 x 5 kg) - Gear milling - Milling spindle synchronized thread cutting - Constant incline angle during rapid traverse movement - Thread re-cutting function - Turning/milling function in Mazatrol - 5-axis machining package for SmoothX: Dksdpfxsyam D Uo Afnoh - EIA/ISO 5-axis simultaneous machining - F) Tool tip control for 5-axis simultaneous machining - Spline fine interpolation - 5-axis spline interpolation - Sub spindle with C-axis including synchronization C1+C2 - Preparation for multiple and flash tool toolholders Dimensions / Weight: - Dimensions (L x W x H): 4,910 x 2,800 x 2,720 mm - Weight: 16,900 kg General machine options: - B-axis 0.0001° - C-axis main spindle input accuracy 0.0001° - Sub spindle positioning without C-axis input accuracy 0.001° - Absolute positioning system (linear axes) - Working area lighting - Operator door with safety interlock - CE standard - Double foot switch for both main and sub spindle - Separate switches for opening/closing chucks - Hydraulic pressure lock - Fully enclosed work area - Automatic opening/closing of chuck jaws for main and sub spindle - Chuck status feedback for main and sub spindle - Chuck status feedback via sensors - Tooleye for upper and lower turret - Lead error compensation input X, Y, Z - Standard tool set (lower turret)

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, operating hours of spindle: 4,486 h, Initial commissioning: 2002 Control system: Fidia C20 with HPX operator panel Machine hours: 146,161 h X-axis: approx. 3,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,500 mm A-axis: ± 105° C-axis: ± 300° Clamping table Clamping surface: approx. 5,000 x 2,000 x 400 mm T-slot spacing: 18H12 / 250 mm Table load capacity: 15,000 kg/m² 2-axis milling head AC3 (2003) Dsdpfx Afsw Au H Renjkh Spindle power: 28 kW Spindle speed: max. 18,000 rpm Torque: 90 Nm Tool holder: HSK 63A Tool clamping: hydraulic Minimum quantity lubrication: external Linear axis drives Feed rate X, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X, Y, Z-axis: up to 1.5 m/s² Electrical connections Connected load: 40 kW Main fuse: approx. 80 A Dimensions, weights Space requirement machine including peripherals: approx. 7,300 x 5,600 x 5,600 mm Total weight: approx. 16,500 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: turquoise Additional equipment - 18-position chain-type tool changer - 3-sided enclosure, without extraction ducts Condition of the machine Fully operational, very good condition. Dismantled, stored and immediately available.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, This multi-axis CNC lathe, CMZ TTL-66-66-T1Y-T2Y, was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power output of 35.5 kW. The machine is equipped with two high-performance spindles with a 66 mm bar passage, two turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, and Y-axis capability on both the upper and lower turrets. It includes a 35-bar high-pressure coolant system, complete with a filtration system and an additional tank. For more information about this lathe, please refer to the attached brochure or contact us directly. Equipment includes: - LPS for left spindle - Reduction tube for left spindle - Hainbuch AXFIX 65 collet chuck (standard) 2703/0008 for left spindle - Hainbuch AXFIX 65 collet chuck (standard) 2703/0008 for right spindle Dksdpfx Afsxmhdnenoh - Tool presetting device - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75µm filter - Coolant wash nozzle - TA/06000/10 8,000W coolant chiller unit - Machine status indicator light - Tool life management system - Tool load monitoring - Programmable automatic parts catcher (pneumatic) - The workpiece extractor is equipped with a pneumatic gripper for automatic opening and closing to retrieve finished parts - Pneumatic ejector for the sub-spindle with 100 mm adjustable stroke. End position detection via sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Preparation for extraction unit, connection flange Ø100 The machine comes complete with a chip conveyor, coolant unit, and tool package. It is available for immediate inspection under power, and available at short notice. Single-shift operated. Further information available on request.

Condition: used, Year of construction: 2005, Mazak QTN 200 lathe, year of manufacture 2005 Mazatrol 640T Dedpfx Ajxgpqpsfnokh 210 mm Kitagawa BB 208 chuck Spindle bore 65 mm Turning length 500 mm Turning diameter 380 mm Tailstock Tool probe

Condition: excellent (used), Year of construction: 2009, CNC control : FANUC 160i - Accessories available. - Fanuc loading robot - Coolant system (Edge 2 tower from ARO-Technologies) - Oil mist separator (ELBARON SA) Travels: X-axis 650 mm Y-axis 300 mm Z-axis 300 mm C-axis swivel angle +150°/ -60° C' axis swivel angle +/- 180° Grinding spindle: Wheel dimensions up to 250 mm Speed 0 - 10,000 rpm. Max. spindle power 26 kW HSK 80 holder Max. Number of disks 6 Workpiece headstock Vmax 180°/s Drive power 1.6 kW ISO 50 mounting Precision (resolution) Resolution linear axes 0.001 mm C-axis 0.001° Dodpfx Afjr Ha Dvonskh Dimensions: Length 3100 mm Width 1915 mm height 2190 mm Weight 8'500 kg