Second-hand machinery for sale (2,431)

Condition: good (used), Year of construction: 1998, Clamping force: 800 kN, Screw diameter: 40 mm, Stroke volume: 204 cm³, Injection volume: 131 cm³/s, Screw speed: 310 1/min, Plasticizing capacity max.29 g/s, Nozzle pressure: 84 kN, Nominal power of pump motor: 15 kW, Installed heating power: 12 kW, Adjustable barrel heating zones: 5, Drying cycle rate: 2000 1/h, Tank capacity: 270 ltr, Machine dimensions approx.: 4.10 m x 1.40 m x 2.02 m, Total weight of machine: 3500 kg, Weight of mold: 860 kg Delneuc Szzo Tifbskl

Condition: ready for operation (used), Year of construction: 2014, operating hours: 30,000 h, Functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, controller manufacturer: Mitsubishi, controller model: M700, number of slots in tool magazine: 24, Müga center RMV250-RT - highly efficient tilting rotary table performs the entire machining process in a single clamping operation. The X, Y and Z axes are completely isolated from chips. The high dynamics of the machine guarantee fast traversing operations and short machining cycles. TECHNICAL DETAILS Traverse path X / Y / Z: 500 / 250 / 350 mm Spindle to table distance: 200 - 550 mm Spindle speed: 12 - 12,000 rpm Spindle power: 5.5 / 7.5 kW Drilling capacity: Ø25 mm x 0.1 mm/rev Tapping: M24 Rapid traverse X / Y / Z: 48 / 60 / 96 m/min Tool holder: HSK-A 63 Djlnot Sv H Ie Tifbjkl Tool length/diameter: 200 / 65 mm Tool magazine: 24 places Tool change time: 1.6 s Chip-to-chip time: 3.4 s MACHINE DETAILS Dimensions: 1900 x 2751 x 2750 mm Footprint: 5600 x 3300 mm Weight: 5.5 tons EQUIPMENT Pallets: not included in the scope of delivery Belt filter: not included in scope of delivery Chip conveyor: included in scope of delivery Equipment: including HSK-A 63 holder package (9 tools)

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 164173, clamping force: 400 kN, screw diameter: 30 mm, clearance between the columns: 550 mm, injection pressure: 1,451 bar, TECHNICAL DETAILS Control: CC 200 Clamping force: 400 kN Dimensions of the mounting plates (h x v): 550 mm x 430 mm Mold height (min.): 180 mm Maximum opening width: 530 mm Injection unit Screw diameter: 30 mm Injection volume: 99 cm³ Injection pressure: 1,451 bar MACHINE DETAILS Rated power of the pump motor: 15 kW Net weight with control cabinet: 2.7 t Dimensions (L x W x H): 3.26 m x 1.2 m x 1.8 m Dkeln Tifovpg T Dobsl

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 921022, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, TECHNICAL DETAILS Travel X / Y / Z: 350 × 220 × 220 mm Travel U / V: 350 × 220 mm Taper pitch/height: ±30° / 220 mm Machining type: Submerged technology Control system: Windows NT with 12" TFT screen, standard keyboard, and remote control Working area Workpiece dimensions: max. 1,000 × 550 × 220 mm Workpiece weight: max. 750 kg Table dimensions: 680 × 450 mm Tank volume: 760 l Bevel cut: max. ±30° / 220 mm Wire EDM system Wire EDM diameter: Ø 0.33 to 0.10 mm Diameter for Automatic threading: Ø 0.33 to 0.10 mm Diameter for automatic rethreading: Ø 0.33 to 0.15 mm Dielectric Filter: 2 paper cartridges Dielectric temperature: ±1 °C Volume of ion exchange resin filling: 20 l Surface roughness: 0.20 µm Ra MACHINE DETAILS Dimensions (L × W × H): 2,020 × 2,050 × 2,000 mm Weight without dielectric: 2,450 kg EQUIPMENT - CleanCut high-speed generator - Integrated wire shredder - Standard interfaces (PCMCIA, Ethernet, etc.) Djln Tsv Ul I Dsifbokl

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, saw blade diameter: 550 mm, saw blade speed: 3,000 rpm, cutting length (max.): 3,350 mm, saw blade bore: 33 mm, saw blade width: 5 mm, swivel angle A-axis (min.): -23 °, swivel angle A-axis (max.): 45 °, Machine is provided "free loaded truck". No dismantling and loading costs! TECHNICAL DETAILS Saw blade diameter: 550 mm Saw blade bore: 33 mm Saw blade width: 5 mm Workpiece length: 300 - 3,350 mm Swivel range: -22.5° to +45° (servo-controlled) Type: carbide saw blade Saw drive Motor power: 3 kW Speed: 3,000 rpm Feed drive Power: 0.75 kW Speed: 3,000 rpm Cutting area Hydro-pneumatic feed control: available Cutting zone protective covers: available Horizontal and vertical pneumatic clamping devices: available Lubrication system Cooling lubrication system: available Operation and automation Touchscreen control panel: Smart Touchscreen Panel PC Integration of the digital loading conveyor: available MACHINES DETAILS Dimensions: 4,268 x 1,905 x 1,600 mm Weight: 440 kg Air pressure: 6 - 8 bar Air consumption: 98.5 l/min Dkslnovvv Aho Tifbsl Compatibility and control Compatibility with cutting lists: available Safety operation (two-hand control): available Data transfer: Ethernet and USB

Condition: repair required (used), Year of construction: 2007, Functionality: limited functionality, cutting force: 950 t, Necessary repair: 1x pump needs to be replaced TECHNICAL DETAILS Dslnovm Amho Tifbskl Diesel engine: Deutz

Condition: new, Year of construction: 2023, operating hours: 5 h, Functionality: fully functional, travel distance X-axis: 6,050 mm, travel distance Y-axis: 2,050 mm, travel distance Z-axis: 200 mm, positioning speed: 15 m/min, TECHNICAL DETAILS Effective cutting area: 6,050 x 2,050 mm Z-axis (clear height): 200 mm CNC control: NUM Traversing speed: up to 15 m/min Cutting head and software Cutting head: STM TAC12 Cutting software: SmartCut waterjet software Cutting valves: Waterjet and abrasive cutting valve Abrasive system Dosing unit: CNC-controlled with intermediate container Storage container: 450 kg capacity Dksln Tisvb Ufrofbel Minihopper system: pressure tank Control and operation Control housing: V2 control panel with integrated control cabinet in the tank Computer: 20" LED monitor, splash-proof keyboard and mouse Safety system Safety equipment: available EQUIPMENT - Premium/MasterCut guides for the Y-axis - Heavy-duty support for workpieces up to 1,000 kg/m² - Positioning laser for precise positioning - Lance flushing system for cleaning - Collecting plates for small parts Note: without pump

Condition: ready for operation (used), Year of construction: 2005, operating hours: 15,000 h, Functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 630 mm, number of slots in tool magazine: 30, Hartford Pro 1000 - stable 3-axis milling center with large machining area, ideal for multiple clamping for machining the 6th side. TECHNICAL DETAILS Travel X / Y / Z: 1000 / 600 / 630 mm 4th axis: can be added if required Control: Heidenhain iTNC530 Spindle speed: 40 - 8000 rpm Distance table to spindle: 100 - 730 mm Number of tool positions: 30 Tool holder: SK40 Feed rate: 12,000 mm/min Rapid traverse X, Y / Z: 20 / 2 m/min MACHINE DETAILS Dksln Tifot Svghobel Power consumption: 23 kVA Machine weight: 6 t Dimensions: 2880 x 2290 x 2496 mm Pallets: not part of the scope of delivery Belt filter: not part of the scope of delivery Chip conveyor: available Equipment: SK 40 pick-up pallet (15 tools) included The automation shown and any accessories are not offered for sale.

Condition: good (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 8M2807A, clamping force: 8,000 kN, screw diameter: 135 mm, clearance between the columns: 1,120 mm, injection pressure: 1,389 bar, injection weight: 6,098 g, TECHNICAL DETAILS Mold clamping force: 8,000 kN Mold opening force: 560 kN Plate dimensions (h x v): 1,600 mm x 1,530 mm Distance between columns (h x v): 1,120 mm x 1,000 mm Mold opening distance: 1,600 mm Mold installation height (min. - max.): 500 mm - 1,100 mm Plate opening stroke: 2,100 mm Ejector stroke: 300 mm Ejector force: 200 kN / 100 kN Injection system Screw diameter: 135 mm Injection pressure: 1,389 bar Injection volume: 8,588 cm³ Injection size for PS: 6,098 g Screw speed (standard/optional): 121 rpm / 153 rpm MACHINE DETAILS Net weight with control cabinet: 45 t Machine dimensions (L x W x H): 10.81 m x 2.92 m x 2.51 m Electrical/hydraulic equipment Nominal pump motor power: 110 kW Installed heating power: 57 kW Number of cylinder heating zones: 7 Dkoln Tifjvpg Nfsbol Number of drying cycles according to Euromap: 965 1/h Oil tank capacity: 1,500 l

Condition: ready for operation (used), Year of construction: 1995, Functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 500 kg, TECHNICAL DETAILS Travel X / Y / Z: 350 × 250 × 300 mm Control: 14" graphic color screen Doln Tifev Uk Szobekl Working area Internal tank dimensions: 800 × 550 mm Max. workpiece weight: 500 kg Clamping table size: 500 × 400 mm Distance table to chuck: 150 - 450 mm Dielectric Tank volume: 400 l Number of paper filters: 3 Dielectric stand: 100 - 350 mm MACHINE DETAILS Transport dimensions (L × W × H): 1,800 × 1,550 × 2,350 mm Total weight (empty tank): 1,870 kg EQUIPMENT - ISOPULSE 32 generator A - Screen - Remote Control - DNC1 Interface - Measuring Cycles - Contouring - Program Expert - Pilot Expert - Polishing Option: CH0 or Ra 0.1 µm - DNC Interface: DNC3 - Auto-Restart

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, machine/vehicle number: 210/210002, travel distance X-axis: 2,500 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 180 mm, spindle speed (max.): 18,000 rpm, swivel angle A-axis (min.): -90 °, swivel angle A-axis (max.): 90 °, Machine is provided "free loaded on truck". No dismantling and loading costs! TECHNICAL DETAILS X-axis (longitudinal): 2,500 mm Y-axis (transverse): 200 mm Z-axis (vertical): 180 mm A-axis (profile rotation): -90° | 0° | 90° Positioning speed X-axis: 64 m/min Y-axis: 64 m/min Z-axis: 40 m/min A-axis (rotation): 60°/s Spindle Maximum power: 4.5 kW Maximum speed: 18,000 - 24,000 rpm Tool holder type: ISO 30 Cooling type: electric fan Compressed air Pressure: 6-8 bar Flow rate: 18 gal/min Tool magazine Manual tool magazine: available Maximum tool capacity: 4 Machining units Direct tool use (top surface): 3 Profile positioning Right-hand pneumatic profile reference alignment: available Control Dksljvvvnwon Tifbel Touch screen: 15" industrial PC Working area Standard number of clamps: 4 Manual clamp positioning on X-axis: available Lubrication of the tool processing area: present Safety barrier (light barrier): optional MACHINE DETAILS Total weight: 1,650 kg Total length: 3,415 mm Total width: 1,615 mm Total height: 2,020 mm Electrics Power: 9.6 kW Current: 30 A Voltage/frequency: 400 V / 3~, 50 - 60 Hz EQUIPMENT - Documentation and manual - Manual clamping positioning - Industrial PC with Windows-based touchscreen interface - Data transfer via remote network connection, Ethernet and USB - High processing capacity to increase efficiency - Automatic lubrication in the processing area

Condition: excellent (used), Year of construction: 1997, operating hours: 64,905 h, Functionality: fully functional, machine/vehicle number: 501637, bar diameter: 65 mm, number of slots in tool magazine: 16, Equipment: documentation/manual, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control: Sinumerik 840C Bar feeder: Irco RBK 7212, year of manufacture 1999 Bar length: 1 m Bar diameter: 65 mm Dkolsu Tc Dzjn Tifbel Turret and spindle Turret: 2 pieces, 8 places each, VDI30, 4 driven tools each Main spindle: Hainbuch chuck Counter spindle: 3-jaw chuck MACHINE DETAILS Operating hours: 64,905 h Dimensions incl. bar loader and chip conveyor (LBH): approx. 6 × 2 × 2 m Weight: approx. 6.5 t Operating voltage: 50 Hz, 400 V EQUIPMENT - Fixture for finished parts - Cooling system - Chip conveyor - Documentation - Various guide tubes for the bar feeder - including 2 tool holders

Condition: not inspected (used), Year of construction: 1981, Functionality: unexamined, HOMAG single-sided edge banding machine type KL39/9C/S 3D Deln Tern Sp Ssifbjkl

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, outer diameter: 3,200 mm, rotational speed (max.): 172 rpm, The Rösler Long Radius system concept uniquely combines either throughfeed or batch processing with minimum space requirements. One pass is about 8.5 m long and the container is 3.2 m wide, so that even very long components can be ground or deburred without any problems. TECHNICAL DETAILS Speed: 172 rpm Grinding wheel: RSG 6/6 D Measuring surface: 105.60 m² Workpiece: Camshaft carrier Noise level: 89.5 dB Input width: 630 mm Output width: 350 mm Input height: 1480 mm Discharge height: 1450 mm Continuous flow system; R 400/9 LR Centrifuge: Z 800 K-HA MACHINE DETAILS Drive power vibrator: 22.0 kW Year of construction: 2005 Drive power centrifuge: 5.0 kW Year of construction: 2017 Supply voltage; 400 V, 50 Hz, 3Ph/N/PE Nominal power: 6.0 kW Dkjljt Su E Nsn Tifbel EQUIPMENT - Water treatment incl. centrifuge and automatic dosing system - Control cabinet for the machine control - Hand lever valve for the separating flap - Central lubrication system

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 61009829, clamping force: 8,000 kN, screw diameter: 135 mm, clearance between the columns: 1,120 mm, injection weight: 6,098 g, ejector force: 200 N, opening stroke: 2,100 mm, TECHNICAL DETAILS Mold clamping force: 8,000 kN Mold opening force: 560 kN Plate dimensions (h x v): 1,600 mm x 1,530 mm Distance between columns (h x v): 1,120 mm x 1,000 mm Mold opening distance: 1,600 mm Mold installation height (min. - max.): 500 mm - 1,100 mm Plate opening stroke: 2,100 mm Ejector stroke: 300 mm Ejector force: 200 kN / 100 kN Injection system Screw diameter: 135 mm Injection pressure: 1,389 bar Injection volume: 8,588 cm³ Injection size for PS: 6,098 g Dolnovpg Iuo Tifbokl Screw speed (standard/optional): 121 rpm / 153 rpm Electrical/hydraulic equipment Nominal pump motor power: 110 kW Installed heating power: 57 kW Number of cylinder heating zones: 7 Number of drying cycles according to Euromap: 965 1/h Oil tank capacity: 1,500 l MACHINE DETAILS Net weight with control cabinet: 45 t Machine dimensions (L x W x H): 10.81 m x 2.92 m x 2.51 m

Condition: ready for operation (used), Year of construction: 2016, Functionality: fully functional, pressure: 11.1 bar, operating pressure: 6 bar, temperature: 102 °C, TECHNICAL DETAILS Design: three-pass design for low-NOx operation Installation: inside Altitude: 400 m Feed water reference temperature: 102 °C Gross steam output: max. 820 kg/h Nominal boiler output: 530 kW Operating pressure: max. 6 bar Test pressure: 11.1 bar Operating pressure: approx. 3 bar Exhaust gas loss with Eco Gas/Oil: max. 7.4/6.8 mbar Exhaust gas temperature after Eco: 119 °C Boiler efficiency with Eco: 95.2% Contents Total water volume: 3.25 m³ Water volume up to NW with Eco 200: 2.50 m³ Average working range: 2.47 m³ Steam water volume: 0.70 m³ Feed water volume: 2.45 m³ MACHINE DETAILS Mains voltage: 3 x 400 V 50 Hz Boiler length: 3,640 mm Boiler width: approx. 1,700 mm Boiler height (incl. Eco 200): 3,760 mm Flame tube diameter: 556 mm Flame tube length: 2,100 mm Weights Transport weight: approx. 3.5 t Operating weight (pressure test): approx. 6.75 t Nominal connection diameters on the boiler Main steam: DN/PN 80/16 Safety valve: DN/PN 25/40 Feed water: DN/PN 25/40 Blowdown: DN/PN 25/40 Doln Tifjvr Tkusbekl Ventilation: DN/PN 15/40 Flue gas connection outside/inside: DN/PN 224/216

Condition: ready for operation (used), Year of construction: 2013, Functionality: fully functional, travel distance X-axis: 3,280 mm, travel distance Y-axis: 1,320 mm, travel distance Z-axis: 170 mm, number of slots in tool magazine: 12, Machine is provided "free loaded on truck". No dismantling and loading costs! TECHNICAL DETAILS X-axis travel: 3,280 mm Y-axis travel: 1,320 mm Z-axis travel: 170 mm CNC control: BiesseWorks Working beams: 6 pieces Suction cups: 18 pieces Tool magazines: 12 MACHINE DETAILS Total weight: 3,000 kg Dolovvvcbjn Tifbekl Electrics Input voltage: 400 V Type of input current: AC Required power: 25 kW EQUIPMENT - Safety mats - BECKER vacuum pump

Condition: not inspected (used), Year of construction: 2004, Functionality: unexamined, HOMAG edgebanding and processing line, KF 61/08/QA/25 edgebanding machine, KF-63/08/QE/15 edgebanding machine, Dkoln Tifern Sl Isbol Optimat TDL 310/25/12 turntable, year of manufacture 2004, L=25 m

Condition: ready for operation (used), Year of construction: 2007, operating hours: 26,102 h, Functionality: fully functional, turning diameter: 320 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 510 mm, No reserve price - guaranteed knockdown to the highest bidder at the end of the auction! MAXXTURN 65 - versatile options for the complete machining of bar parts thanks to the powerful main spindle, which enables shaft machining with the tailstock Delst Suzden Tifbekl TECHNICAL DETAILS Turning diameter: 320 mm Center distance: 510 mm bar capacity: 65 mm Travel X / Y / Z: 260 / 80 / 610 mm Control system: Siemens 840 collet chuck HS / GS: Röhm Steady rest: not available Tailstock: present Chip conveyor: present Bar feeder: LNS Quick Load Servo III, bar length 1 m Belt filter: not available

Condition: good (used), Year of construction: 2004, Functionality: fully functional, clamping force: 8,000 kN, screw diameter: 100 mm, injection pressure: 1,613 bar, opening stroke: 1,175 mm, TECHNICAL DETAILS Clamping force: 8,000 kN Opening stroke: 1,175 mm Tool height (min./max.): 450 mm - 950 mm Platform distance: 2,125 mm Clearance between columns: 1,310 mm x 1,210 mm Injection unit Screw diameter: 100 mm Injection pressure: 1,613 bar Injection volume: 3,338 cc Weight of PS injection: 3,038 g Weight of PE injection: 2,370 g Plasticizing speed: 190 rpm EQUIPMENT Dkjlovpg E Tjn Tifbel 2 x hydraulic core 2 x air valve Euromap 67 for the robot

Year of construction: 2016, Condition: good (used), Functionality: fully functional, machine/vehicle number: 6280028128, Machine is provided "free loaded truck". No dismantling and loading costs! TECHNICAL DETAILS Max. profile cutting width: 320 x 160 mm Min. profile cutting width (depending on gripper position): 30 x 10 mm Raw material system Length of the raw bar system: 7,600 mm Finished part system Finished part length: 3,500–4,600 mm Kurt cell Kurt cell (50-150/150-350): optional Feed system Shortest raw bar length: 1,500 mm Swing arm selection: 5 (option 9) Support plate: 10 (over 120 mm 5) Infeed Servo drive: linear Gripper adjustment electric: Y/Z Gripper guide: standard Remnant piece measurement: optional Remnant piece processing: fully automatic Processing station Number of axes: 5 Milling spindles: 8 (can be prepared) Saw Number of axes: 3 Saw blades (diameter): Ø 550 mm, optional Ø 650 mm Saw angle: 22.5°–157.5° (swivel) Notch cuts: standard (from above) Outfeed chip carriage Number of axes: 1 Dksln Tifjvvu S Iebjl Outfeed conveyor Lifting station: yes Swing selection: 5 Width of outfeed conveyor: 4,000 mm MACHINE DETAILS Dimensions: 20 x 3 x 4 m Weight: 8.8 t Connection power: 39 kW Operating voltage: 3/N/PE 400 V EQUIPMENT - Feed magazine - Loading transport - Processing station with milling unit, saw unit and clamping blocks - Unloading transport of profiles (removal gripper) and unloading conveyor - Acoustic protection cabin - Control panel on the soundproof cabin - Control cabinet - Fencing and protective doors

Condition: ready for operation (used), Year of construction: 2006, operating hours: 6,152 h, Functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: Siemens, controller model: 840D, number of slots in tool magazine: 30, EMCO MCP 100-50 - CNC milling machine with two pallets for precise machining of workpieces with reduced non-productive times TECHNICAL DETAILS Travel X / Y / Z: 1000 / 500 / 500 mm 4th axis: mounted 5th axis: not available Control system: Siemens 840D Tool holder: SK40 Tool magazine size: 30 places Doln Tot Sulcoifbokl Number of pallets: 2 pieces Equipment: SK40 mounting package included

Condition: good (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: 90859, clamping force: 10,000 kN, screw diameter: 120 mm, clearance between the columns: 1,400 mm, injection pressure: 1,632 bar, plate width: 1,690 mm, plate height: 1,960 mm, TECHNICAL DETAILS Control: UNILOG B4 Clamping force: 10,000 kN Column spacing (h x v): 1,120 mm x 1,400 mm Plate dimensions (h x v): 1,960 mm x 1,690 mm Installation height (min.): 550 mm Installation height (max.): 1,020 mm Opening stroke: 1,100 mm Ejector stroke: 300 mm Ejector force: 118 kN Centering of the moving platen (D): 250 mm Centering of the fixed platen (D): 315 mm Injection system Screw diameter: 120 mm Injection volume: 5,655 cc Injection weight: 5,146 g Injection pressure: 1,632 bar Screw length: 22 l/d Screw stroke: 500 mm Screw speed: 130 min⁻¹ Screw torque: 11,370 N·m MACHINE DETAILS Machine dimensions (L x W x H): 11.6 m x 2.9 m x 2.5 m Total weight: 76,500 kg EQUIPMENT 2 x core on fixed platen, MOOG control. 2 x pneumatic mold nozzle control on fixed platen. Doln Tovpgxasifbjkl 1 x hydraulic mold nozzle control on fixed platen. 2 x pneumatic blow-off valves on movable platen.

Condition: excellent (used), Year of construction: 2004, operating hours: 13,600 h, Functionality: fully functional, machine/vehicle number: 005642, Extremely solid CNC milling machine with mounted 4th axis - gearbox shifts automatically at less than 500 revolutions and thus provides an enormous torque for power-intensive machining (M30 in C45 is no problem). Extensive SK50 fixture package (approx. 90 fixtures) is included in the purchase price. TECHNICAL DETAILS X-axis travel: 1,800 mm Y-axis travel: 850 mm Z-axis travel: 700 mm Control manufacturer: Heidenhain iTNC 530 Speed: max. 6000 rpm Distance spindle to table: 305-1050 mm Table clamping surface: 1850 x 850 mm T-slots: 18 x 7 x 120 Table load: 3,000 kg Feed / rapid traverse: 7 / 15 m/min Number of spindles: 1 Number of slots in the tool magazine: 40 Tool holder: SK50 Tool weight: 15 kg Tool dimensions L x Ø: 125 x 300 mm MACHINE DETAILS Dimensions: 4700 x 3230 x 3340 mm Deljtrf Rpon Tifbjkl Machine weight: 16.5 t Connected loads: 45 kVA EQUIPMENT Documentation/manual Infinitely variable speed Chip conveyor

Condition: good (used), Year of construction: 2001, Functionality: fully functional, clamping force: 12,000 kN, screw diameter: 100 mm, clearance between the columns: 1,200 mm, injection weight: 4,363 g, New machine control TECHNICAL DETAILS Clamping force: 12,000 kN Distance between columns: 1,200 mm x 1,200 mm Minimum mold height: 500 mm Maximum mold height: 1,695 mm Distance between tables: 2,000 mm Dkoln Tijvpgwiefbsl Injection unit Screw diameter: 100 mm (barrier screw) Injection volume: 4,800 cm³ Injection weight: 4,363 g Performance Pump motor power: 75 kW Heating power: 70 kW