Second-hand machinery for sale (2,431)

Condition: ready for operation (used), Year of construction: 2015, Functionality: fully functional, machine/vehicle number: 74005, Description of the basic machine - Horizontal end machining center for simultaneous end machining on both sides of shaft-shaped parts - Cutting to length, centering, drilling, cross drilling, chamfering, slot milling, etc. TECHNICAL DETAILS Control: Siemens Sinumerik 840D SL Workpiece diameter: max. 60 mm Workpiece length: 500 mm Horizontal stroke: 200 mm Transverse stroke: 200 mm Dkob Hn Uet Hkp Tepyel Tool carrier system left/right: fixed motor spindle / 6-position crown turret MACHINE DETAILS Total mass: 16 t Voltage: 3x400V 50 Hz Connected load: 74 kW

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 15914, TECHNICAL DETAILS Pressing force: 630 kN Installation height: max. 600 mm ram stroke: max. 400 mm throat depth: 280 mm Table height: 850 mm Djb Hn Uetwpggopyekl Table width: 630 mm Table depth: 500 mm Overtravel: 20 mm Overtravel time: 90 ms Safety distance: 180 mm MACHINE DETAILS Cooling: Type air TYPE OEKA-R4/1.0 Operating pressure: 260 bar Oil volume: 285 l Weight: 6000 kg Idle noise: 69.2 dB Drive power: 22 + 4 kW

Condition: ready for operation (used), Functionality: fully functional, Year of construction: 2017, operating hours: 1,500 h, power: 200 kW (271.92 HP), Complete pellet production line for the production of feed pellets/straw pellets/fertilizer pellets from agricultural raw materials, whereby the pellet press and hammer mill are also suitable for the production of wood pellets. Hammer mill is completely new (built in 2021) and has only been in operation for 2 hours. Valid ATEX certificate! Djb Hn Upsv Ak S Doyskl SCOPE - Pellet press - Conveyor belt - Elevator - Pellet cooler + sieve - Buffer container with discharge for the ground material - 2 cyclones (centrifugal separators) with rotary valve - Fan for cooler extraction - 1 new ring die and various used spare parts - Feeder table for bale shredder - Bale shredder including control - Hammer mill (new) including control - Centrifugal separator - Scheuch dust filter including control - Discharge screw - BigBag station for dust filter TECHNICAL DETAILS System throughput: 1.3 t/h (depending on material) Hammer mill throughput alone: 2 t/h (depending on material) Pellet press output: 75 kW Feeder table length: 10 m Bale shredder output: 35 kW Hammer mill output: 75 kW Output Dust filter: 20,000 m³/h Dust filter manufacturer: Scheuch Dust explosion report: 2023, according to EU ATEX Directive 2014/34 MACHINE DETAILS Hammer mill dimensions: 2,350 x 970 x 1,200 mm

Condition: good (used), Year of construction: 2011, operating hours: 7,003 h, Functionality: fully functional, machine/vehicle number: 20111102, travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 630 mm, controller model: Fanuc A 100, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 24, TECHNICAL DETAILS Dkjb Hn Upeu Dai Ssysl Control: Fanuc A100 Technology: Belt spindle Speed: 10,000 rpm Tool holder: SK40 Traverse path X: 800 mm Travel Y: 510 mm Z travel: 630 mm Tool magazine Tool magazine: 24 stations Tool holder: SK40 Tool change time: 2.5 s Chip to chip time: 5.5 s Tool weight: 7 kg Tool length: 250 mm Table and clamping Distance spindle to table: 100 - 730 mm Clamping surface: 950 x 510 mm Workpiece weight (max.): 500 kg T-slots: 3x 18 x 160 mm Rapid traverse Rapid traverse X: 30 m/min Rapid traverse Y: 30 m/min Rapid traverse Z: 30 m/min MACHINE DETAILS Weight: 6 tons Switch-on time: 33,641 h Spindle hours: 7,003 h Workpiece counter: 54254 EQUIPMENT - Chip screw - IKZ system with filter - Measuring probe, m&h IRP 25.10 - Electronic handwheel - Spindle cooler

Condition: good (used), Year of construction: 2007, operating hours: 24,287 h, Functionality: fully functional, machine/vehicle number: H-H5022, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, controller model: Ultimax, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, TECHNICAL DETAILS Control system: Hurco Ultimax X travel: 1,270 mm Y travel: 660 mm Z travel: 610 mm Speed: 12,000 rpm Power: 15 kW Torque: 238 Nm Tool magazine Tool magazine: 40 stations Tool holder: SK40 Tool diameter: 75 mm Tool length: 300 mm Dkob Hn Upju Dairjyol Tool weight: 10 kg Table and clamping Clamping surface: 1,500 x 660 mm T-slots: 6x 18 x 1000 mm Table load (max.): 1,300 kg Spindle to table distance: 150 - 760 mm Rapid traverse Rapid traverse X: 30 m/min Rapid traverse Y: 30 m/min Rapid traverse Z: 20 m/min MACHINE DETAILS Dimensions: 3,250 x 2,350 x 2,950 mm Weight: 9 tons EQUIPMENT - Chip conveyor - IKZ system with filter and high pressure - Tool measurement: laser, BLUM - Interface measuring probe prepared - Electronic handwheel - Spindle cooler

Year of construction: 1998, Condition: good (used), Functionality: fully functional, machine/vehicle number: 107856, new seals on hydraulic cylinders TECHNICAL DETAILS material length: 6050 mm sheet thickness: 6 mm (450 N/qmm) passage: 6050 mm upright projection: 100 mm Control system: ELGO P8721 number of support arms: 4 stop range (from cutting line): 10 - 1000 mm Adjustment speed: 70 mm/s MACHINE DETAILS machine length: 7000 mm machine width (without support arms): 2350 mm machine width with supporting arms: 3440 mm machine height: 2550 mm Machine weight: 21000 kg Dsb Hn Uol N Ufyjpyskl Oil tank. 300 l Connected load: 18 kW Material: aluminum 1,2 mm EQUIPMENT motorized backgauge 1 side stop sheet holding-up system

Condition: ready for operation (used), Year of construction: 2000, Functionality: fully functional, working width: 1,200 mm, saw blade diameter: 80 mm, working height: 910 mm, workpiece height (max.): 180 mm, rotational speed (max.): 3,000 rpm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Working width: 1,200 mm Working width with single belt: 70 mm Working thickness: 180 mm Working height: 910 mm Driver spacing: 420 mm Clearance between belt and column: 180 mm Adjustable feed speed: 3 - 18 m/min Adjustable speed of the movable column: 2 m/min Electric spindle Speed: 3,000 rpm Power: 1 - 13 kW Shaft diameter and length: 40 x 55/95/118 mm Saw blade bore diameter for scoring saw and hogger: 60-80 mm Dksb Hov I S Udsn Upyjl Belt drive Speed: 6,000 rpm Power: 2.2 - 9.2 kW Spindle diameter and length: 40 x 55/95 x 118 mm mm EQUIPMENT - Saw unit - Milling unit - Soundproof enclosures

Condition: like new (used), Year of construction: 2018, operating hours: 1,646 h, Functionality: fully functional, machine/vehicle number: GN4240001, Cylindrical grinding machine in special design and with automation SPECIAL VERSION Dksb Hn Upotr A Rhoyjl - Tailstock as counter spindle with C-axis 0.001° (synchronized with workpiece spindle - optional) - Center taper MT no. 4 - Stroke 25 mm (with CNC position control) AUTOMATION - Fanuc industrial robot, model M-10iA 10M with force sensor and Schunk gripper - Rotating robot table - Robot connected to the machine (ready for work) TECHNICAL DETAILS Distance between chuck and counter spindle: 300 mm (special version) Center distance: 400 mm (without chuck) Center height: 210 mm (radius) External grinding diameter with / without tailstock: Ø 300 / 400 mm Control: Fanuc 0I-TF Grinding spindle Grinding wheel dimensions: Ø 405 x 50 - 75 mm Motor: 5.5 kW Speed: 1783 rpm Workpiece spindle Workpiece chuck: Hainbuch Spanntop mini size 52 Motor: 2.7 kW Spindle speed: 10 - 300 rpm C-axis: 0.001° Rotation angle: -30° / +90° (manual) AUTOMATION Robot: Fanuc M-10iA 10M Number of axes: 6 Payload: 10 kg Reach: 1422 mm Mass: 130 kg Equipment: Force sensor, Schunk gripper MACHINE DETAILS Switch-on time: 3914 h Grinding time: 1646 h EQUIPMENT - Grinding sensor (Marposs) - Balancing system (Marposs) - Measuring probe for checking linear dimensions and the other for checking cylindrical dimensions - in progress (Marposs) - Steady rest for grinding (Arobotech) - Power clamping cylinder for workpiece spindle - pneumatic - Cooling unit with filter system - Grinding mist extraction

Year of construction: 2008, Condition: good (used), Functionality: fully functional, Machine is provided free loaded. TECHNICAL DETAILS turning length over bed / saddle: 670 / 480 turning length: max. 750 mm turning diameter: max. 430 mm Bar diameter: max. 102 mm speed: 42 - 4200 rpm travel X / Z: 300 / 840 mm rapid traverse: 30 / 25 m/min spindle power cont. / 30 min: 30 / 22 kW spindle nose: ASA 11 tool holder: 12 places tool size: 25 x 25 mm / 40 mm tool speed: 45 / 6000 rpm MACHINE DETAILS weight: 6700 kg dimensions: 4500 x 1900 x 2320 mm EQUIPMENT Deb Hspgrzcon Upyekl Chip conveyor tool presetting automatic door opening high pressure pump. 6 bar drive tools and various static tools (see picture)

Condition: excellent (used), Year of construction: 2003, Functionality: fully functional, 5-axis machining center including pallet automation TECHNICAL DETAILS Number of axes: 5 X-axis: 400 mm Y-axis: 240 mm Z-axis: 350 mm Speed: 42,000 rpm Number of tool changer positions: 100 positions Deb Hn Upetx Uuljyskl Automation: EROWA pallet robot

Condition: ready for operation (used), Year of construction: 1995, Functionality: fully functional, machine/vehicle number: 35318, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 500 kg, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control type: Charmilles CNC control system X-axis travel: 350 mm Y-axis travel: 250 mm Z-axis travel: 300 mm C-axis movement: 360° rotation Workpiece capacity Max. workpiece size: 800 × 550 × 290 mm Max. workpiece weight: 500 kg Table Table dimensions: 500 × 400 mm Electrode changer Electrode changer: Automatic multi-position changer Max. electrode weight: 15 kg Dielectric Dielectric tank: approx. 400 l Surface finish: Ra 0.3 µm Accuracy Positioning accuracy: ± 0.002 mm Dielectric management system: Roboform The Roboform 100 features a sophisticated dielectric management system. This state-of-the-art feature ensures stability during the EDM process, maximizes precision, and minimizes electrode wear. Thermal Regulation: The machine is equipped with an integrated thermal regulation system. This feature ensures that machine performance is not affected by fluctuations in the ambient temperature. User-Friendly Interface: The machine's ease of use and efficiency are paramount. The responsive and intuitive user interface allows for simplified management of EDM processes and settings. Durability: The Roboform 100 is built with high-quality materials and meticulous engineering, promising durability and reliable performance even under harsh operating conditions. FEATURES - Dielectric Management System - Integrated Temperature Control - Intuitive, user-friendly user interface Dkjb Hnewa S I To Upyol - High-quality machine construction for long-lasting operation

Condition: ready for operation (used), Year of construction: 2017, Functionality: fully functional, HIGLIGHTS - Substrates in oversize format - Inline connection of various finishing systems - Comprehensive range of materials - Environmentally friendly printing - ProfitAccelerator business development tools - Xerox prInteract combines regular system checks with Xerox expertise - Automatic print density control - Inline spectrophotometer for maximum detail, advanced color profiling, spot color calibration and automatic color control - Carrier Dispensing System delivers consistent, uniform color from first to last proof and from one print job to the next TECHNICAL DETAILS Paper size 178 - 364 x 178 - 572 mm Printable area: paper size -1 mm margin on each side Paper weight uncoated: 60 - 350 g Coated paper weight: 90 - 350 g Deb Hnst Hghfe Upyjkl Speed: 6,600 prints/h Capacity in reloading system: 30,000 sheets Counter reading: 15.7 M pieces

Condition: refurbished (used), Year of construction: 2002, Functionality: fully functional, clamping force: 10,000 kN, screw diameter: 95 mm, injection pressure: 1.795 bar, injection weight: 3,064 g, ejector stroke: 250 mm, opening stroke: 2,400 mm, TECHNICAL DATA Control unit: MC6 Injection force: 10000 kN Distance between the columns (H x V): 1400 x 1120 mm Distance of mold opening: 1700 mm Mold installation height: 700 - 1200 mm Opening stroke of the clamping platen: 2400 mm Ejector stroke: 250 mm Ejector force: 226 kN (reverse: kN 59) Deb Hn Ujufhx Uspyokl Screw diameter: 95 mm Ratio L/D: 23 Injection pressure: 1795 bar Injection volume: 3367 cm³ Injection size for PS: 3064 g Injection capacity: 690 cm³/s Closing force of the nozzle: 166 kN MACHINE DETAILS Connected load pumps: 90 kW Heating capacity: 61 kW Net weight: 65 tons Machine dimensions (L x W x H): 10.98 x 3.29 x 2.49 m

Condition: ready for operation (used), Year of construction: 1997, Functionality: fully functional, machine/vehicle number: 2287, drilling depth: 1,200 mm, feed length X-axis: 1,600 mm, feed length Y-axis: 560 mm, workpiece weight (max.): 5,000 kg, TECHNICAL DETAILS CNC control: Siemens Sinumerik 805M Drilling range Full drilling range (single-lip): Ø 3-30 mm Drilling range (single-lip drilling): Ø 40 mm Drilling depth (Z-axis): max. 1,200 mm Traverse paths Horizontal cross travel (X-axis): max. 1,600 mm Vertical travel (Y-axis): max. 560 mm Depth travel (Z-axis): max. 1,200 mm Horizontal longitudinal travel (W-axis): max. 500 mm Table width Table width: 1,200 mm Table length: 1,200 mm Dkobeu Td E Hj Hn Upysl Table movement (Z-axis): max. 500 mm Table load: max. 50,000 N Workpiece weight: max. 5,000 kg

Condition: ready for operation (used), Year of construction: 2004, operating hours: 9,389 h, Functionality: fully functional, turning length: 760 mm, turning diameter: 330 mm, travel distance X-axis: 250 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 830 mm, TECHNICAL DETAILS Max. turning length: 760 mm Max. turning diameter: 330 mm X-axis: 250 mm Dksbsv D H Nuj Hn Upyel Y-axis: ±50 mm Z-axis: 830 mm B-axis: 830 mm Main spindle speed: 5,000 rpm Counter spindle speed: 6,000 rpm Bar capacity: Ø65 mm Number of tool stations: 12 MACHINE DETAILS Weight: 5,500 kg Workpiece counter: 538,606 pieces Switch-on time: 66,394 h Cutting time: 9,389 h EQUIPMENT - Chip conveyor - Tool measuring probe - LNS Servo 2 bar loader - Accessories as per pictures

Year of construction: 2006, operating hours: 82,068 h, Condition: good (used), Functionality: fully functional, machine/vehicle number: 258-22, Moving column machine in steel-concrete composite construction with workpiece changing device. Low-maintenance model from the world-renowned manufacturer CHIRON. Double spindle - vertical - machining center incl. chip conveyor KNOLL AE 1058.009 and a compound unit (already dismantled). Prescribed maintenance intervals for plant and plant parts have always been observed. Debsmt A Ivs Hn Upyekl TECHNICAL DETAILS Drilling capacity in steel: 60: 2 x 6 36 mm (with insert drill) Guides: with long term grease lubrication speed range: 20-12.000 rpm CNC control: SIEMENS 840D spindle distance in X-axis: 250 mm X-axis: 300 mm Y-axis: 400 mm Z-axis: 425 mm (with variable tool change plane) rapid traverse speed 60 m/min in X-, Y- and Z-axis Main spindle drive: 1 piece with 2 AC motors power at 100 % ED: 9,5 kW power at 15 % ED:14,0 kW Drive: digital direct drives with indirect absolute path measuring system (no reference point approach) tool places: 212 Tool diameter: max. 65 mm Tool diameter with free neighboring places: max. 175 mm Tool weight: max. 2.5 kg (5.0 kg at 2 stations) Tool change time: approx. 0.9 s (depending on control) Chip-to-chip time: approx. 2.1 s (control-dependent) Workpiece changing device: 0 / 180 Tool holder: HSK A 63 1 MACHINE DETAILS type of current: 3 / N / PE - 50/60 Hz operating voltage: 400 V power: 44 kVA rated current: 63 A Coolant system HL 450 / 900 LATE CONVEYOR Manufacturer: KNOLL Type: AE 1058.009 Year of manufacture: 2006 EQUIPMENT - CHIRON maintenance manual on screen - Operating hours and piece counter - Socket 230 V - Socket for portable mini handwheel - Control cabinet cooler as door-mounted unit - Signal lamp - splash guard cladding - chip conveyor - mini control panel - Rinsing gun - Central pneumatic connection - Fixture flushing - 70 bar HP pump - 1 internal cooling package with suction unit - Fully enclosed working chamber - Extraction unit with air cleaner - Extraction capacity 800 m³/h - CHIRON mold life monitoring with: - Automatic loading door of the splash guard - "opening" and "closing", actuation via two-hand start release - Integrated IWW 0/180° workpiece changing device - Chiron Lasercontrol Single F500 - Ethernet connection RJ45 at the control cabinet instead of in the control panel - Pneumatic and hydraulic connections - Central hydraulic and pneumatic connection prepared for max. 20 connections, 6 connections are designed including connection couplings, 4 of them for hydraulics, max. 210 bar and 2 for uncontrolled pneumatics. - 4 Additional hydraulic connection(s) - Hydraulic power unit - 2 Hydraulic aggregate extension for further clamping circuits

Condition: ready for operation (used), Year of construction: 1991, Functionality: fully functional, machine/vehicle number: 35303, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 500 kg, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control type: Charmilles CNC control system X-axis travel: 350 mm Y-axis travel: 250 mm Z-axis travel: 300 mm C-axis movement: 360° rotation Workpiece capacity Max. workpiece size: 800 × 550 × 290 mm Max. workpiece weight: 500 kg Table Table dimensions: 500 × 400 mm Electrode changer Electrode changer: Automatic multi-position changer Max. electrode weight: 15 kg Dielectric Dielectric tank: approx. 400 l Surface finish: Ra 0.3 µm Accuracy Positioning accuracy: ± 0.002 mm Dielectric management system: Roboform The Roboform 100 features a sophisticated dielectric management system. This state-of-the-art feature ensures stability during the EDM process, maximizes precision, and minimizes electrode wear. Deb Hewa S I Hjn Upyekl Thermal Regulation: The machine is equipped with an integrated thermal regulation system. This feature ensures that machine performance is not affected by fluctuations in the ambient temperature. User-Friendly Interface: The machine's ease of use and efficiency are paramount. The responsive and intuitive user interface allows for simplified management of EDM processes and settings. Durability: The Roboform 100 is built with high-quality materials and meticulous engineering, promising durability and reliable performance even under harsh operating conditions. FEATURES - Dielectric Management System - Integrated Temperature Control - Intuitive, user-friendly user interface - High-quality machine construction for long-lasting operation

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, machine/vehicle number: 115195, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, rotational speed (max.): 8,000 rpm, number of slots in tool magazine: 32, TECHNICAL DETAILS CNC control: OSP-E100M X-travel: 762 mm Y-travel: 460 mm Z-travel: 460 mm A-axis travel: +110° B-axis travel: +40° Dkebevambpj Hn Upyol Table dimensions: 1,000 x 460 mm Table type: Nikken rotary table, model 5AX-120 Spindle Spindle speed: max. 8,000 rpm Tool holder: BT40 Number of tools: 32 MACHINE DETAILS Coolant supply (pressure): 15 bar Machine dimensions (W x D x H): 2,750 x 1,900 x 2,700 mm Weight: 6 tons Connected load: 23 kVA

Condition: good (used), Year of construction: 2015, operating hours: 14,843 h, Functionality: fully functional, machine/vehicle number: 816815404, TECHNICAL DETAILS X-axis travel: 8,000 mm Y-axis travel: 2,000 mm Worktable length: 8,000 mm Width of the worktable: 2,000 mm Laser source: YLS-8000-CUT Laser power: 6 kW Laser type: Solid-state laser Laser gain medium: Ytterbium laser Wavelength range: 1070 ± 5 nm Operating mode: CW / modulated Modulation frequency: 0 - 5 kHz Power tunability: 10 - 100 % Control: SIEMENS Sinumerik 840D controller Programming software: Lantek or Metalix Guide: SIEMENS linear guides Cutting head: PRECITEC Dkjb Hn Upett Shgjysl MACHINE DETAILS Total length: 22,000 mm Total height: 2,515 mm Total width: 4,040 mm Total weight: 33,500 kg Switch-on time: 32619 h Laser time: 14843 h Operating voltage: 400 V, 50 Hz Rated current: 113 A Laser voltage: 400 - 480 V, 50 - 60 Hz

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, table height: 400 mm, pressing force: 500 t, table width: 5,500 mm, table length: 3,000 mm, TECHNICAL DETAILS capacities Maximum force: 500 t Restoring force: 200 t Table dimensions: 5,500 x 3,000 mm Table stroke: 3,500 mm Table height above floor: 400 mm Extension speed of the table: 60 - 80 mm/s Stroke of the carriage: 1,800 mm Daylight opening: 2,000 mm Cushion dimensions: 3,960 x 1,860 mm Stroke of the upper cushion stop: 180 mm Cushion force: 100 t Fast return: 35 mm/s Electrical power: 380 V, 50 Hz Output: 59 kW Dkob Hn Ueu Iy Trspyjl EQUIPMENT PLC Siemens Bolster table with dimensions of 5,500 x 3,000 mm Cooling in the control cabinet CE marking

Condition: reconditioned (used), Year of construction: 2018, Functionality: fully functional, Material joining machine - for the production of double-sided adhesive tapes and other material joints The semi-automatic cutting machine is suitable for winding various types of coupled tapes - single-sided adhesive materials, foam and aluminum on plastic or cardboard cores Unwinding unit: Separate from the machine, with an intermediate aluminum platform for operator inspection. TECHNICAL DETAILS Width of the cylinder: 2600 mm Maximum material width: 2500 mm Diameter of the unwind shaft: 3" Maximum jumbo diameter: 1000 mm Diameter of the rewind shaft: 3" Maximum winding speed: 100 m/min Maximum winding diameter: 400 mm Brake: 4-caliper disk brake Dkeb Hn Upetu U Iwsysl MACHINE DETAILS Overall dimensions: 4000 x 2000 x 400 mm Electrical connection: 400V 3P+N+T, 63A Connected load: 20 kW Compressed air: 6 bar, 5 l/min EQUIPMENT - Proportional brake for adjusting the winding tension - Winding turret with push-button rotation 2 pneumatic 3" winding shafts - 1 AC drive motor - 1 AC winding motor - Regulation of tension and line speed - Manual filling/emptying of the winding shafts - Preselection of meter counting with slowdown and stop

Condition: good (used), DESMA injection molding machine for direct injection of shoes. Injects PVC, TPR and TPU granules. 12 stations mean that 6 pairs of shoes are injected at the same time. The machine consists of a turntable (carousel), a hydraulic part, an injection unit and a control cabinet. The machine after the extensive renovation of the screw and cylinder and other wearing parts. The machine is in very good condition. We provide disassembly and removal of machines from the factory hall. For sale are 6 machines similar this one, and many more different machines from the shoe manufacturing plant. Dkjb Henvfmnon Upyjl

Condition: like new (used), Year of construction: 2019, operating hours: 500 h, Functionality: fully functional, machine/vehicle number: 3522287, total height: 5,500 mm, total width: 4,517 mm, total length: 3,165 mm, load capacity: 4,000 kg, No minimum price - guaranteed sale at the highest bid! TECHNICAL DATA Unloading height 1/2: 0 / 2.9 m Carrier dimensions: 4100 x 857 mm Side walls: 120 mm Djb Hju Aabren Upyekl Usable height per beam: 320 mm Number of carriers: 16 Storage area: 56.16 m² Storage volume: 17.97 m³ Provisioning time unloaded/loaded: 23 / 26 s MACHINE DETAILS Dimensions: 5,500 x 4,517 x 3,165 mm Weight empty: 2,816 kg Weight + empty carrier: 4,400 kg Weight + carrier + payload: 8,400 kg Floor space: 14.3 m² Surface area per shelf: 247 cm² Average floor load: 587 kg/m² Power consumption: 6.5 kW Voltage: 400 V AC/3~, 50/60 Hz EQUIPMENT - Installation and configuration instructions - Manual in DE and EN - Data structure documentation - Documentation interface requirements - Training documentation

Condition: ready for operation (used), Functionality: fully functional, saw blade diameter: 450 mm, cutting height (max.): 120 mm, cutting width (max.): 300 mm, rotational speed (max.): 3,000 rpm, saw blade bore: 35 mm, product length (min.): 600 mm, TECHNICAL DETAILS Maximum workpiece thickness: 120 mm Dsbevzyulj Hn Upyjkl Maximum workpiece width: 300 mm Minimum workpiece length: 600 mm Example cutting sizes: 90 x 220 mm / 50 x 270 mm Feed & cutting cycle Maximum feed speed: 180 m/min Maximum acceleration: 15 m/s² Saw cycle time: 0.2 - 1 s Average number of cuts: 80 - 90 / min Feed motor power: 7.5 kW Saw blade & motor Saw blade diameter: 450 mm Saw blade bore: 35 mm Speed: 3,000 rpm Saw motor power: 5.5 kW Motor power: 5.5 kW Extraction Extraction connection: 200 mm

Condition: excellent (used), Functionality: fully functional, Year of construction: 2005, operating hours: 7,160 h, A 5-ton forklift is available for loading the machine parts. TECHNICAL DETAILS X-axis: movable support with gantry drive on both sides Y-axis: movable carriage on the X-support Z-axis: mounted on Y-slide, auto-stop in case of voltage drop Deb Hotxxw Den Upyokl Travel X / Y / Z: 3,600 / 1,800 / 1,200 mm Cube dimension (5-sided machining): 3,020 / 1,220 / 910 mm B-axis: ± 135° C-axis: ± 270° Spindle speed: 3,000 - 27,000 rpm Control: OSAI S10 510s Spindle power: 6 kW from 18,000 rpm Tool holder: ISO 30 Collet chuck; type ETS 25 for shank diameter of 16 mm Tool magazine: 8 stations, traveling Table surface: 3,670 x 1,355 mm Positioning accuracy X / Y / Z: 0.1 mm Repeat accuracy X / Y / Z: 0.05 mm Positioning accuracy C / B: 30 arcsec Repeat accuracy C / B: 22 arcsec Rapid traverse X / Y / Z: 80 / 80 / 70 m/min Rapid traverse: B / C: 25 rpm MACHINE DETAILS Connected load: 25 kVA Supply voltage: 400 V ± 5%, 50 Hz ± 5% Total weight: 7.5 t EQUIPMENT - Liquid cooling by means of cooling unit - Control panel - Dynamic tool control software - CMS portable control keyboard - Teach-in system: joystick - Teach-in software: Power arm for recording points on sample pieces in order to generate machining paths from them - Vacuum system - Compressed air system - Suction connection - Central lubrication