Screw compressor GA132VSD

Atlas Copco GA132VSD

Condition: excellent (used), Year of construction: 2020, S016101 Iedext Idhopfx Ag Dsa MANUFACTURER: ATLASCOPCO MODEL: GA132VSD SERIAL NO.: APF244732 YEAR: 2020 POWER (kW): 136.4 CAPACITY (m3/min): 5.8-23.5 PRESSURE (bar): 10 HOURS (DOC/TOTAL): FREQUENCY INVERTER: yes BUILT-IN DRYER: no HEAT EXCHANGER: yes COOLING (AIR/WATER): air ON TANK: no DOCUMENTS: no CONNECTION: 2 NEW/USED: USED

Condition: used, Plant: lamella separator, lamella clarifier, lamella separator Condition: used, up to 120 m³/h depending on medium Ijdpsppyhtofx Ag Dea Design: robust, powerful design Material: VA on conatin frame, 30 ' container, scraper plates: in PP dimensions: LXBXH 7580X2435X3000 mm Weight: approx. 8000 kg Principle: The dirty water is fed to the inlet of the lamella separator and flows downwards in it. Due to the arrangement of the lamella plates in the lamella separator, the dirty water is diverted below the lamellae and flows upwards through the lamellae. Thus, the solids sink to the bottom of the lamellas. The purified water is transported to the outlet. The solids on the lamellas gradually slide down along the lamella plates. This is where the sludge funnel is located. Scraper: Optionally, we offer the lamella separator with a scraper, which keeps the sludge flowable. Application: Separation of solids and liquids by sedimentation. Lamella separators are often used as a preliminary stage before filter presses or decanters for thickening. By pre-thickening a thin sludge, the filter press can be sized smaller in terms of filter area. The plant is in good condition and is available for rent or purchase. An inspection at our plant is possible by arrangement. We also offer new lamella separators with a delivery time of approx. 8 to 10 weeks !

Year of construction: 1986, condition: refurbished (used), Chamber filter press, cpl. General overhaul in stainless steel lining, 82 filter plates in PP (food safe), 30 mm cake thickness, press capacity approx. 1100 litres, filter area 96 m2, fitted new filter cloths, max. 15 bar feed pressure possible, closed outlet via 2 diagonal corner holes, automatic plate transport and filter cloth washing system in stainless steel , high-pressure pump 100 bar, Manzini piston pump (MC-100 in stainless steel) for filling, with base for raising (stainless steel), control cabinet Iodpfx Ajn Dw Nkjg Dja

Condition: good (used), Spectro CIROS CCD Water Analyser - height: 105cm - width: 150cm - depth: 75cm Good condition fully functional can be inspected and tested on site. Isdpfx Agefiqn Ue Dea Shipping also abroad. Inspection : Basically I would like to point out that in order to avoid misunderstandings, the article can be inspected and tested under power before purchase. Please ask questions before purchase to avoid any ambiguity. If you have general questions or would like to make an appointment for a viewing, I can be reached at any time at the telephone number below. Errors in the description and prior sale reserved. The value added tax is shown separately on my invoices. Dispatch with forwarding agent.

Condition: used, Year of construction: 2018, System: Decanter Type: Flottweg C4E-4/454 Complete dewatering system in container Year of construction: 2018 Sludge throughput: approx. 0-40m3/h Solids capacity: max. 1.2 TS/h Equipment: front double door, side entrance door, fan heater, lighting, sockets, etc. Rotor: max. speed 3650 min-1 Drum diameter: 470 mm System: Container system Interchangeable bridge system for accommodating the downstream system components. Piped and wired ready for operation as a functioning unit. Container system design: Stand construction, clad with sandwich panels and holders for transportation with interchangeable bridge systems. Accessories: FHM preparation station PolyMix 4000SP, measuring equipment, switchgear Feed pump: Seepex BN 52-6LS Discharge conveyor: SS D320 double trough spiral conveyor Dimensions: L 7820mm x W 2500 mm x H 3880 mm Empty weight: 14500 kg Weight in operation: 15000kg Voltage: 400V Power consumption: 142 A Power consumption max.: 70kW Isdpfxou R Icms Ag Dja Fuse protection: 250 A Frequency: 50 Hz Sludge inlet: DN 100 Centrate drain: DN200 Solids discharge: Spiral conveyor Further information: see photos

Year of construction: 1999, condition: ready for operation (used), Year of manufacture: 1999 Parts counter: 33,158,945 Scope of delivery: Iodpfx Aovl Hc Deg Doa - gamma 333 - Accessories / spare parts - Attachment for cable in barrel storage

Condition: ready for operation (used), Year of construction: 1999, IMMEDIATELY AVAILABLE, chamber filter press from Häcker with base frame and 50 m3/h Abel pump, plate format 1200 x 1200 mm, approx. 90 PP plates, 30 mm cake, content approx. 2700 liters, automatic. Plate transport, open outlet in filtrate trough on both sides, press is ready for use immediately after assembly, Abel pump was serviced by the manufacturer shortly before it was taken out of service, galvanized base frame with staircase, location is near Würzburg / Germany Isdpfx Ajrunu Isg Dsa

Condition: excellent (used), functionality: fully functional, overall weight: 1,830 kg, Year of construction: 2011, Air compressor Brand Atlas Copco Model GA75VSD FF Year of manufacture: 2011 Maximum working pressure (MAWP): 12.8 bar / 185 psi / 1.28 MPa Capacity: 14.68 m³/min Voltage: 400 V Frequency: 50 Hz Motor power: 75 kW / 100 HP Rotation speed: 2975 rpm Weight 1830 kg Dimensions 2300x1100x2000 mm Isdpfsv Nw A Asx Ag Doa Air dryer Atlas Copco Type: ID 245 Year of manufacture: 2011 Voltage: 380/400 V, 50 Hz Power 1.93 kW Weight: 150 kg Maximum air pressure: 13 bar Refrigerant: R410A Maximum refrigerant pressure: 42 bar Refrigerant temperature range: 1°C to 61°C Minimum refrigerant pressure: 1.2 bar

Condition: new, The SBS 1270/2 is a compact and robust folding machine from KNUTH, designed for versatility in the Folding Machines category and specifically within Manual Folding Machines. Ideal for bending thin sheets, its small footprint makes it suitable for limited workshop spaces while its segmented upper tool provides a wide array of bending possibilities. The SBS 1270/2 features an adjustable angle stop with a scale up to 135°, ensuring precise bending for producing small series. Additional specifications include a maximum plate thickness of 2 mm and a working length of 1,270 mm, allowing for efficient operation. It is equipped with a foot switch for hands-free clamping and a cam lock with rebound spring for effective counterbalancing. For those looking to enhance their sheet metal processing capabilities, the SBS 1270/2 offers an excellent solution. For more information, don't hesitate to request a quote today. Ijdjuy H Utspfx Ag Dsa

Condition: good (used), Opening: 620 x 350 mm Rotor-diameter x -width: 1.060 x 610 mm Iedpfxslgzrhj Ag Doa feed size hardrock -180 mm feed size limestone -300 mm, complete with E-drive, conveyor and steel-construction