Screw compressor refrigeration dryer FD70

Atlas Copco GA11VDS

Year of construction: 2001, condition: used, Max. pressure: 500t, max. operational temperature: 370°C, oil heated, oil cooled, with a secondary cycle for recirculation of heating output, was overhauled in 2014. Redjdwf Dbepfx Aa Ejck

Year of construction: 1990, condition: good (used), CNC-4th axis Rsdpfxegabu Ue Aa Eock NIKKEN type: CNC-200 year 1990 with counterholder and base plate.

Condition: used, Year of construction: 2001, functionality: fully functional, Japanese-built 4-axis CNC lathe for secondary machining, featuring C axis, Y axis, and driven tools. Installed in 2002 and compliant with CE standards, with the following main specifications: Turning diameter: 755 mm Workable diameter: 390 mm Workable length: 655 mm 12-position driven turret Y axis travel: +/- 60 mm C axis Spindle nose: A2-8 Kitagawa B-210, 250 mm Spindle speed: 3,500 rpm Spindle motor: 18.5 kW Driven tool motors: 5.5 kW Driven tool speed: 4,000 rpm Bar capacity: 73 mm Tailstock: MT5 Rapid traverse speed: 18 and 24 m/min on X and Z axes Weight: 5,800 kg Complete with: - Hydraulic programmable tailstock - Box ways - Chip conveyor - Headstock oil cooling - Dual foot pedal for main chuck and tailstock open/close - Set of fixed tool holders Rcedpfxexf Iygo Aa Esk - Set of driven tool holders - Complete manual set - CE certificate

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 124, Price upon request Used CNC Vertical Lathe Manufacturer MORI SEIKI Model VL 55 Year of manufacture 2001 With MSC 518 CNC control, 12-tool turret, and chip conveyor Turning length = 653 mm Turning diameter = 550 mm X-axis = 350 mm Z-axis = 660 mm Speed up to = 2000 rpm Spindle power = 30 kW Approx. weight = 12.5 t Price upon request Specifications: Used CNC Vertical Lathe Manufacturer MORI SEIKI Model VL 55 YOM 2001 With MSC 518 CNC control, 12-tool turret, and chip conveyor Turning dia. = 550mm Rjdpfswl An Iex Aa Ejck Turning length = 653 mm X-Axis = 350mm Z – Axis = 660 mm Speed = 2000 rpm Spindle power = 30 kW Weight approx.. = 12.5 t

Condition: used, Year of construction: 2006, x-travel 600 mm y-travel 400 mm z-travel 400 mm control MSX 501 Mori Seiki table surface area 700 x 450 mm max. table load 350 kg number of T-slots 4 T-slot - width 18 mm T-slot - distance 100 mm Number of revolutions 12.000 U/min power capacity - main spindel 18,5 / 15 / 11 kW tool taper BT 40 max. Torque 110,5 Nm diameter of forward milling spindle bearing 70 rapid travel x/y/z 20.000 mm/min feed speeds 1 - 20.000 mm/min Tipp feed 15 Steps / 0 - 1.260 mm/min Number of Toolpositions in magazine 40 Pos. Max. mould width 80 mm max. tool-dia with free toolbox 125 mm max. tool length 250 mm max. tool weight 8 kg change-time chip to chip 2,8 sec change-time tool to tool 1,0 sec total power requirement 34 kVA weight of the machine ca. 7,2 t Rcodpfx Aajv Az Ucs Esk dimensions of the machine ca. 2,8 x 3,0 x 2,9 m Machining Center Vertical MORI SEIKI - NV 4000 DCG - ca. 14.000 Operating-Hours

Condition: good (used), Year of construction: 2002, Machine is in good working condition. Parts shown by hand not come. Rcedpexbqnxjfx Aa Esk

Year of construction: 1997, condition: good (used), Build in 1997, 55 KW, 4 bar Rcsdsg A Hcuopfx Aa Ejk

Condition: used, Year of construction: 2017, operating hours: 20,000 h, functionality: unexamined, machine/vehicle number: GA11VSD+FF, Compressor compressed air system Atlas Copco Consisting of: Compressor GA18 Plus, year of manufacture 2007 Compressor GA11VSD+FF, year of manufacture 2017 Control ES 6 The buyer must take care of the professional dismantling himself. Rodjvx Nmfopfx Aa Eock Forklift is provided.

Condition: ready for operation (used), Max. operational pressure: 11bar, motor rotational speed: 2945/min, nominal power: 30kW, operational hours counter: 67,212h. Rcjdjl Eyq Rjpfx Aa Eok

Condition: used, Year of construction: 2001, Turning length 470 mm Rcjdpoxdfi Njfx Aa Ejk Max. torning dia. 390 mm Spindle speeds 3500 rpm Movements X/Z - 235/520 mm No of stations in turret 12 pcs. Control: MSG 500 Accessories: Various tool holders