Asitrade

Asitrade MPC III

Condition: used, Year of construction: 1988, BOBST Printing Machine with 4 bottom colors anilox cilinders 120l/cm and 80l/cm Rbedpfsv Ifpuox Acvsw TRANSFER BOBST FLATBED DIE CUTTER BOBST AUTOPLATINE SPO 1600, max format 1100 mm x 1600 mm / 43.3" x 63" with 4 Bottom Printing unit and transfer Bobst * Vacuum feeder * Die cutting section * Waste elimination section * Centerline II * High pile delivery with two lifting tables * Max sheet format: 1100 mm x 1600 mm / 43.3" x 63" * Min sheet format: 520mm x 600mm / 20.5" x 23.6" * Cutting force: 400 t * Materials: E, B, C, CB, BE flutes * Max speed: 6,000 sheets/hour Possibility to sell them separately

Year of construction: 2006, condition: like new (used), Container volume 32 m3 Rsdpfx Aofhb Tkocvjbw

Condition: good (used), Year of construction: 2014, only approx. 150 million impressions Equipped with: CX Package Logistics – with manual non-stop feeder FAPC (Fully Automatic Plate Change) Preset Ergotronic control console WallScreen display Colortronic ink metering Varidamp Lateral, circumferential, diagonal register control Technotrans Beta c 220L (air-cooled) Ink temperature control CleanTronic Synchro – roller / blanket / impression cylinder wash DriveTronic feeder SIS (Sensoric Infeed System) Non-stop feeder – manual, not fully automatic Non-stop delivery with roll-on device Raised on a plinth (420mm) Ink agitators (UV) EES (Energy Efficient System) CleanTronic simultaneous blanket & impression cylinder wash CleanTronic UV – dedicated position for UV wash inside cabinet UV interdeck – 6 x UV cassettes, installable at any position UV interdeck – positions available at all 6 print units, drying towers, and 3 positions in the delivery Rbedpex Sdn Asfx Acvow Coating unit 1: Harris & Bruno aqueous and UV coating pumps with prep tanks (heated) Drying tower 1: VariDry IR/Hot Air dryer (plus interdeck position) Drying tower 2: VariDry IR/Hot Air dryer (plus interdeck position) Coating unit 2: Harris & Bruno aqueous and UV coating pumps with prep tanks (heated) DriveTronic SFC (Simultaneous Form Change) at coating units KBA VariDry IR/Hot Air/UV at end of press ALV3 extended delivery

Year of construction: 2021, condition: new, Aluminium ascending conveyor belt incl. substructure rising range starting from 50mm (adjustable) discharge range 1500mm (adjustable) Rbjdpfx Acshh Dbaevjw conveyor belt width 500mm (adjustable) We supply our conveyor belts in PVC, PU or rubber. PVC- conveyor belt incl. driver and corrugated edge Drive: Motor 0,25KW ( adjustable ), speed 0,3m/sec Connection 220/240V, 50Hz protection class IP54 drive etc. ready for connection, motor control optional 6x adjustable machine feet for alignment Shaft edge: 40x35mm (adjustable) T-20 cleats - 400mm pitch (adjustable) 2-ply especially cross-stable Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply the corresponding equipment from our own production. B2hd9kmmdn Please contact us by phone to find a suitable solution for your application. conveyor belt, conveyor belt system, discharge belts, belt conveyors, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 30996 B, MAN ROLAND R906-6 LTTL Year 2004 Machine no. 30996 B Total impressions: approx. 405 million Sheet-fed offset press – 6 printing units + 2 varnish coating units + 2 tower dryer units 5 units with conventional inking rollers + 1 unit with hybrid rollers High-pile feeder and extended delivery Technical specifications: - Printing speed: 13,000 sheets/h - Max. sheet size: 1020 x 1420 mm - Min. sheet size: 600 x 850 mm - Stock thickness: 0.2–1 mm - Max. print area: 990 x 1400 mm - Plate size: 1165 x 1430 mm; plate thickness: 0.30 mm - Blanket size: 0000 x 0000 mm; blanket thickness: 1.90 mm - Dimensions (L x W x H): approx. 25.00 x 4.70 x 2.70 m - Power requirement: approx. 00 kW - Weight: approx. 140,000 kg Accessories and features included: - Non-stop feeder - Steel feed table - Stream feeder with vacuum belt - Preset system (automatic paper size and thickness adjustment) - Electronic double sheet detection - Electromechanical double sheet detection - Electronic side lay control (photoelectric and acoustic) - Antistatic devices at feeder and delivery - RCI machine control and diagnostics via monitor console: self-diagnosis, control and monitor console; remote ink and dampening control; axial, circumferential and diagonal register control with light pen; daylight lamp and memory card for job storage - Multi CCI 2D quality control - APL™ fully automatic plate changer - Remote-controlled circumferential, lateral and diagonal register - Rolandmatic continuous dampening system with alcohol dosing, cooling and Technotrans Beta D recirculation unit - Ink temperature control - Programmable automatic blanket wash - Programmable automatic roller wash - 570 mm raised height - Chromed cylinders - AIRGLIDE sheet transport - Anilox UV coating unit with varnish pump - 2 hot air drying towers between coating units - Anilox conventional coating unit with varnish pump - Automatic sheet de-curler - Grafix Cantronic 3000 powder spray - IR ELTOSCH dryer Rsdpfx Acjygdl Novjbw - UV ELTOSCH dryer with 3 lamps - Extended delivery - Steel delivery table - Non-stop feeder - Tools, documentation - Supplied with all standard parts and accessories Availability: Immediate Condition: Good working order, no damage to cylinders or gears Inspection: Machine is in production, test runs possible Video available

Condition: excellent (used), Year of construction: 1995, FULLY AUTOMATIC INLINE MACHINE FOR FOLDING BOXES BOBST MIDLINE 924 Speed: up to 18000 boxes per hour Nominal machine width: 2400 mm Nominal plate cylinder circumference: 1000 mm Largest printing area: 920 x 2400 mm Maximum corrugated board thickness: 10 mm Rodpfx Acsxrfrasvjbw Standard slitting blade thickness: 6.35 mm Average connected load: 200 kVA The line consists of: 1) Feeder Serco 2) Main machine – Flexographic printing machine midline 924 Colors: 3 // Automatic washing device 3) Slotter (Riller) Longitudinal slots // Tool is installed in the machine. 4) Punching module (e.g. for punching handles) 5) Breakout vibrating station (Material – punching residues are disposed of using compressed air) 6) Glue station Robotech 7) Folding unit 8) Counting station & display The specified number of cartons will be bundled - up to here main unit - 9) Package binder / bundling machine CEMA Fully automatic strapping machine with weld seal and press for 5 mm plastic strapping, for binding corrugated cardboard bundles in the direction of travel of the flute 10) Palletizing system Martin Automatic layer formation. Roller tables receive the packages from the bundling machine. The packages are positioned using the ball bearing table according to their arrangement in the preselected position. If necessary, the package can be rotated 90° or 180° simultaneously with the lateral movement.

Condition: ready for operation (used), Year of construction: 2024, The subject of my auction is a conveyor belt with a length of 1x3 m and a belt width of 0.4 m. Possibility of transport. Rjdpfx Aet R R T Tocvsbw

Condition: good (used), Year of construction: 2012, Speed: up to 18,000 sheets/hour in straight printing up to 15,000 sheets/hour in perfecting mode Printing substrates: 0.04 - 0.7 mm in straight printing 0.04 - 0.6 mm in perfecting mode ErgoTronic Professional ColorTronic QualiTronic Color DensiTronic Professional Rbjdpox R Shbefx Acvew DriveTronic feeder Non-stop operation SIS (Sheet Inspection System) Ant-Marking-Coat FAPC fully automatic plate changer Varidamp All washing units Inking unit temperature control Powder application unit Water-cooled machine Approx. 218 million impressions

Condition: ready for operation (used), For sale: conveyor belt shown in the photos. Length: 12 m. Belt width: 0.9 m. Please contact me for more information. Possibility of transport. Redpfx Asrx Sz Rocvsbw

Year of construction: 2020, condition: new, Aluminium ascending conveyor belt with mobile substructure 4000mm length Dim: approx. 4000 x 1020 x 105mm Aluminium construction: Conveyor belt width between corrugated edge 800mm PVC conveyor belt with cross cleats Conveyor belt green, 2-ply, particularly transversely stable endless welded with step connection * antistatic through threads in the fabric of the running side Drive: Motor approx. 1.10Kw, speed 1.2m/sec. Rbedpfxsff Hfps Acvow * Controllable with frequency converter Connection 220/400V, 50Hz Protection class IP54 Drive, motor control optional