Decoiler - expansion mandrel 2 t

ARKU

Condition: excellent (used), Year of construction: 1992, number of straightening rollers: 21, total length: 3,200 mm, straightening roller diameter: 30 mm, total height: 2,100 mm, total width: 2,000 mm, sheet thickness (max.): 6 mm, Decoiler Max. width 350 mm Clamping area coil internal  mm Coil diameter 1500 mm Work load 1000 Kg Straigtner Width 250 mm Roll diameter 30 mm Number off rolls 21 units Working speed 40 M/Min   Max. thickness 6 mm at 240 N/mm2 Max. Thickness 5 mm at 400 N/mm2 Credpszcu S Sjfx Aaxsd Length:3200mm Width:2000mm Height:2100mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), functionality: fully functional, machine/vehicle number: XP2000, total height: 7,550 mm, total width: 2,780 mm, total length: 3,070 mm, load capacity per storage section: 500 kg, construction height: 7,600 mm, type of input current: three-phase, input voltage: 415 V, empty load weight: 500 kg, warranty duration: 12 months, load capacity: 20,000 kg, Equipment: documentation/manual, safety light barrier, Kardex shuttle 500 XP2000 415v Colour Blue & Grey Max load per tray 500Kg Crjdpforgqw Eox Aaxod Number of Trays 40 Total machine load 20,000 Kg Tray Dimensions width - 2450mm x 864mm depth Machine Dimensions 7550mm x 2780mm x 3074mm These machines are modula and can be reduced in Height to fit any facility Full installation service available with 12 months warranty Supply only without warranty Service & Maintenance available after installation if required

Condition: used, Year of construction: 1986, material width 500 mm coil weight 2 x 2,0 t material thickness 1,0 - 4,0 mm coil internal diameter 350 - 420 mm coil external diameter 1600 mm no. of straightening rolls 9 straightening roll diameter 50 mm number of draw-in rolls 2 speed 0 - 40 m/min material thickness at 500 mm material width 3,5 mm power requirement 17,5 kW Crodpfxeyx Ilxe Aaxjd Dimensions (WxDxH) 2,3 x 4,2 x 2,4 m - Straightening machine RM 5050.4/9 with infinitely variable drive, supporting rolls - Double decoiler AH 2000/2/M with auxiliary drive, manual centralized expansion, pneumatic snubber roll, interchangeable jaws to widen the inner diameter +130 mm

Condition: used, Year of construction: 1982, material width 250 mm material thickness 0,4 - 5,0 mm no. of straightening rolls 9 straightening roll diameter 60 mm speed 3 - 15 m/min material thickness at 250 mm material width 3,5 mm Codpevuk Nysfx Aaxjrd material thickness at 100 mm material width 5,0 mm power requirement 1,8 kW weight 0,9 t dimensions (LxWxH) 1,45 x 1,4 x 1,55 m SPECIAL DEAL as is where is, WITHOUT additional work free loaded to truck

Condition: new, Year of construction: 2026, Build your production facility for the best ergonomics, efficiency and profitability. A sheet metal decoiler will allow your business to save money, reduce waste within your shop and help free up storage space. We have the right solution whether your sheet metal workshop is big or small. CIDAN Machinery has a wide range of decoilers that can be combined to make an efficient production facility based on your requirements – where parameters such as power, distance, time and access to material are decisive for fast and cost-effective production. Using a sheet metal decoiler from CIDAN Machinery: Codpemfn Icofx Aaxerd - is very efficient - reduces waste - is ergonomic - saves money.

Condition: used, Year of construction: 1984, material width:350 mm coil weight:1 t material thickness:0,5 - 6 mm coil internal diameter:380 - 540 mm coil external diameter:1500 mm Csdpfx Aot Hmk Tsaxsrd no. of straightening rolls:9 straightening roll diameter:30 mm number of draw-in rolls:2 weight of straightening machine:2 t dimensions straightener (WxDxH):2,0 x 2,0 x 1,9 mm weight of decoiler:1,3 t dimensions decoiler (WxDxH):1,7 x 1,5 x 1,6 m

Condition: used, Year of construction: 2007, machine/vehicle number: 001669, Lg 33121 Credpfxshigmbs Aaxed Single-sided unwinding reel ARKU AH 3000/ST-M Year of manufacture: 1995 Maximum strip width: 600 mm Maximum load capacity: 3,000 kg Maximum coil outer diameter: 1,800 mm Spreader: hydraulically operated Presser arm: hydraulically operated Take-up reel with auxiliary drive and brake Coil loading table, fixed + reel traversing device including: Lg 33221 High-performance strip straightening machine LORENZ BRM 50/620.9 Year of manufacture: 2007 Machine no. 001669 Maximum pass width: 620 mm Number of straightening rollers: 9 Straightening roller diameter: 50 mm Material thickness: 0.7 to 6.0 mm Straightening rollers are multiply supported to prevent deflection. Drive for all rollers via a distributor gearbox and universal joints. Used, as is, ex warehouse, immediately available. Overhaul possible upon request. Delivery time upon agreement. Further data will be available shortly or upon request.

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, pressure:63 t throat:250 mm stroke:8 - 100 mm no. of strokes:120 Hub/min table::715 x 500 mm dayligth:330 mm ram adjustment:63 mm clamping plate:700 x 480 mm hole in the table:240 mm Hole in clamping plate:110 mm dimension of ram:450 x 280 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:1,2 x 1,7 x 2,7 m hydraulic tilting single column eccentric press, tilting in 4 steps, opening to rear (325 x 500mm) and below (360x160mm) with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot-trip operation possible, operating-mode Credpfx Aaefx Hv Hjxed selector for adjustment of continuous or single stroke, emergency cut-off, piece counter, various accessories

Condition: used, Year of construction: 1993, material width 350 mm coil weight 2,0 t coil internal diameter 470 - 530 mm coil external diameter 1500 mm power requirement 1,0 kW weight 1,5 t Crsdpsvuuapsfx Aaxed dimensions (WxDxH) 1,3 x 1,6 x 1,9 m motoric driven, with manual expansion as is where is, WITHOUT putting into operation

Condition: good (used), Year of construction: 1975, 13 stations shaft Ø: 50,4 mm strip width: 500 mm strip thickness: 1,5 mm Crsdpfxjbif E Ee Aaxod

Condition: used, Year of construction: 1996, grinding length 1.000 mm grinding width 550 mm workpiece height 400 mm table surface area 1.580 x 550 mm table load capacity 950 kg magnetic clamping plate 1.000 x 550 mm x-Travel 1.200 mm table feed 1 - 30 m/min vertical feeds: 1 - 300 mm/min z-axis 470 mm cross feed 1 - 2.000 mm/min dimensions of grinding wheel 400 x 100 x 127 mm Crsdsxx A Dmspfx Aaxsd grinding wheel speeds 1.500 - 3.500 U/min grinding spindle drive 11,00 kW total power requirement 23,00 kW weight of the machine ca. 7,50 t dimensions of the machine ca. 4,50 x 3,20 x H2,90 m Coolant system with coolant pump integrated in the hydraulic tank, exhauster.

Condition: used, Year of construction: 2006, machine/vehicle number: M 91317, Decoiler Coil weight: 5 ton Cedpfsuqd Udjx Aaxsrd Material width: 80 - 500 mm Coil exterior diameter: 1800 mm Expansion range: 508 mm Speed: 50 m / min Leveller / Straightener Material width : 50 - 500 mm Number of levelling rolls: 9 pcs. Diameter of the levelling rolls: 65 mm Number of pull out rolls: 2 pcs. Diameter of the pull out rolls: 150 mm Material thickness: 1 - 8 mm Feeding speed: 50 m / min Feeding length: 0,1 - 9999,9 mm Standard configuration Coil loading unitStroke 500 mm Load capacity 5000 kg Material width max. 500 mm

Condition: used, Year of construction: 1985, Decoiler Crodpfxjxdl Nij Aaxed Decoiler with arm: 1,5 ton Material width: 350 mm Coil exterior diameter: 1.200 mm Expansion range: 370 - 430 mm Speed: 0 - 20 m / min Leveller / Straightener Material width : 250 mm Number of levelling rolls: 9 pcs. Diameter of the levelling rolls: 30 mm Material thickness: 0,5 - 6 mm Cross section: 1.200 mm Feeding speed: 20 m / min Required power: 18 kW Standard configuration - Pneumatic clamp roller- Manual disc brake

Condition: used, Year of construction: 1980, machine/vehicle number: A-07/471A, sheet width - max.:130 mm Credpfxocxxx Rs Aaxsd straightening roll diameter:40 mm :5 :2+2 sheet thickness - min.:0,4 mm sheet thickness - max.:3,5 mm weight:0,4 t dimensions of the machine ca.:0,6x0,65x1,15 m with integrated, stepless adjustable Vari-drive, reversing, operating-mode switch for manual and automatic operation, introduction roller cage, position indicator of straightening rolls via analogue display, adjustment of straightening rollers via hand wheels, automatic swivel arm control, very good condition

Condition: excellent (used), Year of construction: 2011, strip width: 100 - 800 mm strip thickness steel (aluminium): 0,8 - 4 (7) mm Crjdpfxjw U Rztj Aaxjd reference material (tensile strength): 600 N/mm² coil weight: max. 15 t coil OD: max. 2.000 mm year: 2011