Mini VFFS with dosing

AMTEC MINI-VFFS SH-50LQ

Year of construction: 1999, condition: good (used), KRONEN K 50-4 ID.NO. 2834 Kronen salad centrifuge mod K-50-4 for drying Vegetables, Fruit, salads etc. capacity up to 1200 kg / Hour depending on the product. Kjdpfxju Iv Avo Aayend Dimensions 85 x 60 cm Height 100 cm.

Year of construction: 2024, condition: new, machine/vehicle number: SPIN500, Co-lead Spin Dryer is a small-sized vegetable centrifuge machine that removes excess water from leafy vegetables and other fresh produce. The basket with the product is placed in the machine and once the lid is closed, the engine will start running. A magnet locks the lid during centrifuging. Suitable for dewatering leafy vegetables, fruit, and vegetable material surface after cutting. The body is made of SUS304 stainless steel, which has a delicate appearance. It is equipped with a basket for dehydration, which is more convenient to store. The machine can set the dehydration time and dehydration speed, and the operation is stable. It is suitable for all kinds of fruit and vegetable industries, and large and medium-sized industrial catering Ksdpfoiniz Dex Aayend enterprises’ demand for vegetable dehydration. * Use frequency conversion centrifugal technology to complete the surface dehydration of the material; * Use frequency conversion technology and optical sensing technology to realize the draining time and speed, and turn on and off control. * Full open design, easy to install and take out during Vegetable Processing. * Driving by frequency conversion adjusting speed three or single asynchronous motor, stable running, convenient for speed adjustment

Year of construction: 2009, condition: good (used), The Grunwald-HITTPAC AKH-059 is a 3-lane filling and closing machine. A rotary cup filling machine is a type of packaging equipment designed to efficiently fill and seal cups with various products, such as yoghurt, pate, kefir, cream cheese and other similar viscous or semi-liquid substances. These machines are commonly used in the food and dairy industry. The machine operates on a rotary system, which allows multiple cups to be filled and sealed simultaneously. The cups move through different stations, each dedicated to specific tasks like cup dispensing, filling, sealing, and capping. Installed cup dimension: 110 x 80mm (150g) Motor and vacuum pumps are protected and installed in the machine frame, underneath the table top. Knjdpfxem Ux Tis Aayed Dimensions: L: 2300 x W: 1800 x H: 2200mm Weight: 1500kg Power: 9kW Efficiency: approx. 2750 – 3750 cups/h (depends on the product consistency)

Year of construction: 2008, condition: like new (used), Eillert MSD-500-V Salad spinner Ksdpfx Aasit I Dijysnd Serial: 188 2008, Stainless salad spinner, with three baskets, 1.5Kw, 3Ph

Year of construction: 2005, condition: ready for operation (used), Consisting of: Vibrating conveyor chute, approx. 1,700 x 600 mm, inlet hopper, laser control system, sorting roller, discharge conveyor belt, discharge chute, switch/control cabinet, control system, make Siemens, type TT20, display, make Best, refrigeration unit, make MTA, type TAE020, year 2004, SN , refrigerant R407C, mobile inclined conveyor belt, W 350 mm, L 4,000 mm, holding frame for big bags, 1 batch of spare rollers, tools, stored in sheet metal cabinet Knodpfju Rqqtsx Aayed

Year of construction: 2008, condition: like new (used), We sell a package of 26 cooling systems - Alfa Laval brand evaporators, all of which work on the glycol cooling system. The systems are powered at 220V or 380V or have an interchangeable power supply system according to the user's needs. The year of manufacture of the systems is 2008. We can sell also piece by piece not only as a package upon request. Commercial unit coolers designed for use in small and medium cold rooms from 10 up to 400 m³. Models designed for easy maintenance with immediate access to inspection areas. This series is available as a DX evaporator and brine unit cooler. Finned coil - H(C)FC Inner grooved Cu tubing ø 12 mm, triangular tube pitch - Brine Smooth Cu tubing ø 12 mm, triangular tube pitch - Corrugated Alu-fins - Fin spacings 4, 5.5, 6, 7, 8, 10 and 11 mm. • 1 to 4 AC fans, ø 250 mm up to ø 500 mm, drawing through the coil. Fan motors 230V/50-60Hz/1ph or 400V/50-60Hz/3ph in two noise levels (H/L). Motors with dynamically and statically balanced external rotors, manufactured in accordance with VDE 0530/12.84. • Corrosion resistant materials: coil frame AluZinc, casing strong and durable sheet metal, powder-coated RAL 9002. • Hinged drip tray and side covers for easy installation and maintenance. Knodpfeg N Db Hsx Aayod • Sufficient space for mounting of expansion valve inside the casing. • Mounting brackets allow flush ceiling mounting. • Fitted with schräder valve on the suction connection for testing purposes. • Pumped system available on request. • Stickers indicate fan direction and refrigerant in/out. • Delivery in mounting position. Coolers are mounted on wooden beams. Installation can take place with the use of a forklift. 1 AlfaCubic series (BL, GL, RL) 2 Refrigerant system (E = dry expansion, W=water/glycol, 3 Noise level (H=high, L=low) 4 Fan diameter (25=250, 35=350, 40=400, 50=500 mm) 5 Number of fans (1 to 4) 6 No. of tube rows (A=4, B=6, C=8) 7 Phases (S= single-phase, D= 3 phases Δ connection) 8 Motor voltage (230V, 400V) 9 No. of circuits 10 Packing (CR=crate) 11 Casing material (AP= powder coated, SS= stainless steel) 12 Defrost system (A= air, E= electric defrost, HG= hotgas) 13 Fin material/coating (AL=aluminium, EP= epoxy coated aluminium) 14 Fin spacing (4, 5.5, 6, 7, 8, 10 and 11 mm) 15 Tube material (Cu=copper) The evaporator coils of these units are high performance and are built-in 1/2 ”fluted copper tube and fin corrugated aluminium with gaps of 3.5, 6 and 8mm. The frame, made of aluminium sheet, is provided with protection collars. This frame has the application of thermostatic expansion valves. Regarding their exterior structure, they are manufactured in aluminium painted in high resistance RAL-9018 polyester colour. The vibrations in these machines are avoided thanks to the fact that their entire structure is compact and highly rigid. All its parts are easily removable for maintenance. These evaporators are fitted as standard with helical fans with high-performance protection grilles and are equipped with 315 or 350mm motors. diameter. Single-phase for 230V 50Hz, with a degree of protection IP-54, with external rotor and low consumption. All motors are connected to a watertight general box, according to IP-55 regulations. Finally, defrosting is carried out with 230V electric heaters built in armoured stainless steel tubes. Its vulcanized ends avoid derivations and are inserted inside the battery and the tray. They are connected to a watertight junction box. Application: Lo

Condition: used, Used UHT Milk Preparation Room Tetra Pak 6600 L/h Technical Overview of the System The Used UHT Milk Preparation Room Tetra Pak 6600 L/h provides a complete solution for the aseptic preparation of UHT milk, drinking yoghurt, juices, and flavored beverages. Currently in storage and ready for reinstallation, the system delivers high thermal and microbiological efficiency. Moreover, its modular design allows it to operate at 2640 L/h, 3850 L/h, and up to 6600 L/h in full configuration. Therefore, it adapts well to varying production demands. Homogenization Section At the core of the Used UHT Milk Preparation Room Tetra Pak 6600 L/h lies a Tetra Pak homogenizer, model Tetra Alex, which ensures effective fat globule size reduction and consistent product texture. As a result, it stabilizes complex emulsions such as flavored milk or drinking yoghurt and prevents phase separation during storage. Importantly, this homogenizer is non-aseptic and operates upstream of the UHT sterilization process, which eliminates any microbial load introduced during homogenization. Furthermore, the homogenizer supports high working pressures and simplifies maintenance. In addition, the robust construction ensures long-term reliability. Integrated Deaeration System The system includes a Tetra Pak deaerator (2005) equipped with an auxiliary pump and tank. Specifically, this component removes dissolved oxygen and unwanted gases from the product before thermal processing. Consequently, it improves product stability and reduces oxidation. Additionally, the vertical configuration ensures efficient gas separation. Meanwhile, the design minimizes product loss and guarantees a continuous flow to the next stage. High-Performance Tubular UHT Module Thermal sterilization occurs through a tubular UHT heat exchanger, manufactured by Tetra Pak and model Tetra Therm Aseptic. In particular, this component sterilizes products via indirect heat exchange while preserving organoleptic properties. Importantly, the module includes a holding coil to maintain temperature over a defined time span. Thus, it complies with food safety regulations and ensures microbiological safety. Similarly, its modular design allows for easy integration into existing lines. Electronic Control and Automation Kodpfewqxhhex Aayond The line features an electrical control panel, a Siemens PLC, and operator panels for precise management of each phase. Notably, it includes detailed electrical schematics, Festo pneumatic valves, and Danfoss inverters to dynamically control pumps and heat exchangers. As such, the automation enables continuous processing. Besides, it optimizes the CIP cycles, reduces downtime, and enhances traceability. Above all, it ensures reliable performance across diverse operating conditions. Conclusion In summary, the Used UHT Milk Preparation Room Tetra Pak 6600 L/h offers a complete, high-efficiency system for preparing UHT milk and beverages. Thanks to its top-tier components and scalable design, this line stands as an ideal choice for dairy producers. Whether the goal is reliability, hygiene, or adaptability, this solution meets strict industry standards. Finally, the system remains in storage and is available for immediate installation.

Condition: excellent (used), 4kw, all stainless steel construction with built in inverter. Ksdpjwdx Hdefx Aayend

Condition: used, Year of construction: 2009, machine/vehicle number: 266, Beutel-Einschweißmaschine / Bag sealing machine Vision Pack Visionbag MF060111 Baujahr / Year 2009 - Serial-No. 000266 Produktion pro Minute 20 Stück / Production uop to 20 pcs/minute Produktabmessungen / Product dimensions: Breite / Width min. 160mm - max. 250mm Länge / Length min. 100mm - max. 360mm Stärke/Dicke / Thickness 15mm Verwendbare Folien: Polyethylen, transparent oder bedruckt (Version mit doppelter Lichtschranke). Stärke max. 30 micron. Films that can be used: polyethylene, transparent or printed (version with double light barrier). Thickness max. 30 microns. Knedpsut Tipjfx Aayjd Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: ready for operation (used), Year of construction: 2022, total length: 1,800 mm, product height (max.): 400 mm, product width (max.): 120 mm, input voltage: 220 V, SHOWROOM machine, the machine advertised was never delivered and was only used for test purposes. In the pictures, the steam tunnel is switched on for test purposes. alpha-pack SST-1500 steam tunnel Technical details: Kedpfet A Ar Esx Aaysnd -even steam distribution through low-pressure steam drum -height-adjustable steam steel pipes -adjustable steam output -can optionally be combined with conveyor belt and sleeve label machine Steam tunnels are particularly suitable for shrinking heat-shrinkable film sleeves on all types of products (glasses, PET bottles, glass bottles, cans and much more). Our steam tunnels are easy to use and the cost-effective alternative to conventional shrink tunnels that are based on electric heaters.