Screw compressor

ALUP Allegro 90

Condition: used, GRUNDFOS vertical multistage high-pressure centrifugal pump Pump in like-new condition, but a part of the magnetic coupling has been removed. Type CRN 10-09 MP-FGJ GI-V Year of manufacture: approx. 2012 Flow rate at 7.2 bar: max. 10 m3/h Head: max. 91.8 meters Power supply: 400 volts, 50 Hz Power: 3 kW - Pump design with 9 stages - Made of stainless steel 1.4401 - The like-new pump was used as a source of spare parts, but several new pump chambers are included - A part of the magnetic coupling is missing Kdedpfofupadox Aldet Suitable for potable water supply, irrigation, and drainage Packaged in the original wooden crate Pump dimensions (L x W x H): 1100 x 250 x 300 mm Shipping crate dimensions (L x W x H): 1400 x 330 x 340 mm Weight with shipping crate: 85 kg Like new Not a submersible pump or a deep-well pump.

Condition: excellent (used), Year of construction: 2017, operating hours: 5,800 h, functionality: fully functional, cooling capacity: 160 kW (217.54 HP), type of cooling: air, power: 260 kW (353.50 HP), heating capacity: 160 kW (217.54 HP), aircooled Multipipe Chiller Trane CMAB HSE 185 cooling and heating in the same time Cooling cap.160 KW (47 refr.tons), Heating 160KW (47 refr.tons) 2 circuits with 4 scroll compressors,inverter driven Kdodowy Dn Sepfx Aldjt Plate evaporator, with integrated 2 pumps R 410a, low hours tested,ready for operation

Condition: excellent (used), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Complete discstack separator. Kdsdpfoucct Iex Aldot

Year of construction: 1990, condition: good (used), Compressor system with air dryer and compressed air tank. Length: 800mm Width: 800mm Kdjdpfxoinur Ao Aldjt Height: 1000mm Volume: 1.5m³/min Power: 11kW

Year of construction: 2022, condition: as good as new (ex-display), Air handling unit with EC technology for hall climate control or heating, cooling capacity in conjunction with a chiller system of 150 kW at 7/12°C, heating capacity 300 kW, air flow rate 20,000 m³/h, 4 x 500 mm air outlets, compact design. Kdsdpfxjfzrgyo Aldst

Condition: new, Year of construction: 2021, fuel type: diesel, number of cylinders: 6, Date of manufacture: 12/2021 Condition: new (unused) Make of engine: C7.1 Serial number: KRJ01138 Kdjdpfsyym D Nox Aldet Please contact for more information Worldwide delivery

Condition: repair required (used), Year of construction: 2016, operating hours: 90 h, functionality: limited functionality, fuel type: diesel, power: 44 kW (59.82 HP), nominal power: 44 kW (59.82 HP), continuous power: 44 kW (59.82 HP), continuous power (apparent): 55 kVA, Diesel Generator ETT-55E (55 kVA) for Sale Condition: Used. The cooling pump is not working and oil is entering the engine; the oil pump needs replacement. Otherwise in technically good condition. We can start the unit for demonstration. A brand new fuel pump is included in the offer. Manufacturer: ETT – Electrotech Dış Ticaret ve Tekstil Ltd., Turkey. Reliable three-phase diesel generator with automatic control panel and soundproof enclosure. Suitable for both backup power supply and continuous industrial or construction site use. Kdsdpsxlngaofx Aldjt Technical specifications: Model: ETT-55E Operating hours: 90 h Output (Standby): 55 kVA / 44 kW Output (Prime): 50 kVA / 40 kW Engine: Ricardo K4100ZDS (diesel, 4 cylinders, water-cooled) Alternator: WHI224D, brushless, with Automatic Voltage Regulator (AVR) Voltage / Frequency: 400 / 230 V – 50 Hz Current: 79 A Power factor (cosφ): 0.8 RPM: 1500 rpm Cooling: Water Fuel consumption: ~10 L/h (at 100% load) Fuel tank capacity: 260 L (up to 8 hours continuous operation) Dimensions (LxWxH): 2250 × 1000 × 1500 mm Weight: 1100 kg Year of manufacture: 2016 Country of origin: Turkey Controls and features: Automatic DATKOM DKG309 control module Emergency stop button Fuel level, oil pressure, temperature, and voltage sensors Battery charging system Automatic transfer switch (ATS) for mains/generator control Overvoltage, overload, and low oil pressure protection Soundproof enclosure – reduced noise levels Manual or automatic operating mode Typical applications: Suitable for: - Industrial facilities, warehouses, production plants - Construction sites and mobile workplaces - Backup power for hotels, hospitals, office buildings, or farms A reliable solution for stable and uninterrupted power supply. Feel free to contact us if you have any further questions.

Condition: used, Year of construction: 2022, functionality: fully functional, DMG MORI DMF 360/11 linear – Universal machining center, year of manufacture 2022, in excellent condition, always maintained on schedule, available for inspection at any time. Ksdpfx Alezv U N Nodjdt Key technical data: Control system: Heidenhain TNC 640 Celos, 5 controlled axes Travel ranges: X 3,600 mm / Y 1,100 mm / Z 900 mm Rapid traverse rate X/Y/Z: 80/60/60 m/min Spindle: 20–10,000 rpm, 44/32 kW, 288/187 Nm, SK 50 NC rotary table: 4,200 x 1,100 mm, max. table load 1,200 kg Tool magazine: 120 positions Equipment: Internal cooling 40 bar, chip conveyor, measuring probe Heidenhain TS 460, automatic doors

Condition: used, Year of construction: 2006, operating hours: 89,000 h, functionality: fully functional, power: 75 kW (101.97 HP), fuel type: diesel, type of cooling: air, Kaeser CSD 122 SFC screw compressor built-in inverter 2.2-10.5m3/min, 75kW, 8.5bar Manufacturer: Kaeser Type: CSD 122 SFC Year of manufacture: 2006 Operating pressure: max 8.5bar Power: 75kW Kjdpot A Uyujfx Aldjdt Capacity: 2.2 - 10.5 m3/min Operating hours: 96244 h (Last service: 88854 h) Inclusion dimensions: 1100 x 2200 x 1900 mm Net weight: 1600 kg

Condition: new, saw blade diameter 350 x Ø 30/40 mm cutting diameter 135 mm cutting length 430 mm dimensions of saw-blade 350x3,0/2,4x40 mm turning speeds 3800 U/min Dust suction hood 100 mm total power requirement 3,0 kW weight of the machine ca. 100 kg dimensions of the machine ca. 1300 x 800 x 1600 mm - Crosscut and miter saws for crosscuts - Miter adjustment on both sides (60° / 45°), with fixed stop Kdsdpfx Alsxabqzsdot - Compound cut on one side up to 45°, with fixed stop - Stable cast iron construction - Precise ball bearing guidance of the tool slide hardened and welded steel shafts - manual saw feed - Saw blade infinitely adjustable in height - socket for opt. suction Cutting data : - Cutting length at 90° = 430 mm - Cutting height at 90° = 135 mm - Cutting length at 45° = 310 mm - Cutting height at 45° = 92 mm Special accessories included: - 1x HM circular saw blade 350 x 3.0/2.4 x 40 mm Z = 108 FTZ neg. for aluminum and plastic - Hydraulic feed brake, continuously adjustable - Pneumatic material clamping from above consisting of: 2x vertical clamping cylinders, adjustable with hand levervalve - 1x machine stand - more powerful drive motor (3.0 kW)