55 kW oilfree variable screwcompressor

ALMIG LENTO 55 WK

Condition: good (used), Year of construction: 2023, operating hours: 159 h, Used, oil-free, variable 55 kW screw compressor Immediately available! (Subject to prior sale!) ALMIG LENTO 55 WK (water-cooled) with Air Control Premium controller The compressor is in very good condition and has only run for 157 hours so far. Year of manufacture: 2023 Operating hours: 157 h Technical data Type: LENTO 55 WK Possible operating pressures of the system(continuously adjustable): 5 - 12 bar Delivery rate at minimum/maximum speed, measured according to ISO 1217 Annex C: at 5 bar min/max: 1.41 / 7.79 m³/min at 6 bar min/max: 1.40 / 7.74 m³/min at 7 bar min/max: 1.39 / 7.69 m³/min at 8 bar min/max: 1.38 / 7.64 m³/min at 9 bar min/max: 1.37 / 7.59 m³/min at 10 bar min/max: 1.35 / 7.29 m³/min at 11 bar min/max: 1.34 / 6.97 m³/min at 12 bar min/max: 1.33 / 6.71 m³/min Rated power of drive motor: 55 kW Protection / insulation class of drive motor: IE 3Protection / insulation class of fan motor: IP 54 / H Operating voltage / frequency at min. / max. speed: 380 / 41/200 V/Hz Residual oil content: 0 mg/m³ Cooling water requirement at 100% load( at inlet +15° / delta t = 15 K ): 55 l/min Cooling water outlet (max): 45 °C Cooling water pressure (min / max): 2 / 10 bar Ppodpfxjxud Eqj Acvep Cooling water quantity (min / max): 140 l/min Cooling water quality according to the valid "ALMiG cooling water conditions" Pressure dew point of refrigerant dryer at 50% load: 3 °C 100% load: 3 °C Sound pressure level (DIN 45635 T.13) soundproofed, at 50% load: 75.6 dB(A) 100% load: 78.2 dB(A) Length: 2,300 mm Width: 1,400 mm Height: 1,580 mm Weight: 1,690 kg Compressed air connection: G 1 1/2 inch Visit our shop, we always have a large number of new and used compressors in stock.

Condition: reconditioned (used), Year of construction: 1999, functionality: fully functional, type of input current: three-phase, power: 160 kW (217.54 HP), input voltage: 380 V, warranty duration: 12 months, year of last overhaul: 2023, Equipment: documentation/manual, 1 pellet press make: Buhler DPAB inner diameter die 660 mm tread die 138 mm Press is equipped with 1 motor 160 KW . Press door is made of Stainless steel with overload valve in door. 2 Roll press with 2 rolls on the press overhauled in dimple or racked version Pedperah Evsfx Acvepp Press is complete with die lifting device and tools The press is completely overhauled and equipped with new bearings and wear parts such as front and rear sliders die washer etc. Also new V-belts Also, all safety devices will be observed and appropriate switches on Friction protection , door switch and inspection hatches will be fitted.

Condition: excellent (used), Year of construction: 1990, the machine in perfect condition very good machine Ppodpfx Acshmi Ucsvsp This is a combo machine pelletizer and sandblasting machine (two in one) very low operation hours

Condition: used, Year of construction: 2014, operating hours: 32,886 h, Used Blow Molding Machine KRONES Contiform S14 year 2014 Introduction: Revolutionizing Bottling Operations In the realm of bottling technology, the Used Blow Molding Machine KRONES Contiform S14, crafted in 2014, emerges as a paragon of efficiency and precision. Developed by Krones, this rotary-type machine redefines the standards of production, boasting unparalleled features and capabilities. Engineering Excellence: Unraveling the Components At the core of the Contiform S14 lies a meticulously engineered mold with 14 cavities, designed to accommodate diverse production needs. This configuration ensures optimal utilization of resources while maintaining high output rates. Complementing this design is the machine’s impressive operational speed, reaching up to 28000 bottles per hour, a testament to its efficiency in meeting demanding production schedules. Power and Performance: A Closer Look to the Blow Molding Machine KRONES Contiform S14 The Contiform S14’s power lies in its robust blow mechanism, generating 266 kW of force to shape each bottle with precision and consistency. Furthermore, the integrated chiller, with a capacity of 13 kW, ensures that temperature-sensitive processes remain stable, guaranteeing product quality throughout production cycles. Such meticulous attention to detail underscores Krones’ commitment to delivering reliable solutions for bottling operations. Flow Dynamics: Optimizing Production A critical aspect of any bottling machine is its flow rate, and the Contiform S14 excels in this regard. With a flow rate of 1300 m3/h, this machine facilitates seamless processing of materials, minimizing downtime and maximizing productivity. This feature is particularly advantageous for industries with high-volume production requirements, where efficiency is paramount. Structural Integrity: Built to Last Durability is a cornerstone of the Contiform S14’s design, evident in its substantial weight of 25 tons. This robust construction not only ensures stability during operation but also enhances longevity, minimizing maintenance requirements and associated costs. Moreover, the machine’s rotary design further enhances its reliability, enabling continuous operation with minimal downtime. Electrical Efficiency: Powering Performance Podpfxjvgu Ecj Acvopp Efficiency extends beyond mechanical components to electrical systems, and the Contiform S14 excels in this aspect as well. Operating at 400V, 6Hz, and drawing 337A, this machine optimizes power utilization, reducing energy wastage and operating costs. Such efficiency is crucial for sustainable operations, aligning with contemporary environmental standards and regulations. Current Status: Ready for Deployment Despite its advanced capabilities, the Contiform S14 currently resides in storage, awaiting deployment in bottling facilities seeking to enhance their production processes.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: API621725, For sale: Atlas COPCO ZR 132 compressor with filters, 125 KW Podpfx Acowrm T Ievopp

Condition: used, Year of construction: 2006, operating hours: 89,000 h, functionality: fully functional, power: 75 kW (101.97 HP), fuel type: diesel, type of cooling: air, Kaeser CSD 122 SFC screw compressor built-in inverter 2.2-10.5m3/min, 75kW, 8.5bar Pjdpfx Aot A Uyuscvopp Manufacturer: Kaeser Type: CSD 122 SFC Year of manufacture: 2006 Operating pressure: max 8.5bar Power: 75kW Capacity: 2.2 - 10.5 m3/min Operating hours: 96244 h (Last service: 88854 h) Inclusion dimensions: 1100 x 2200 x 1900 mm Net weight: 1600 kg

Year of construction: 2025, condition: new, In order to empty of fruit and vegetables of wood or plastic boxes in a washing machine, on a sorting conveyor or a bain-marie. The outlet amount from the box can be regulated about an infinitely variable hydraulic tilting equipment. The filling of the bin tipper is possible by means of heave stacker or hand elevating platform truck. Standard implementation: Psdpfjcl Tx Dex Acvopp Lifting force: up to 550 kg / box Impulse engine power / elektr. Connection: 2. 2 kW/; 240 V, 3 phases, 60 hertz Weight: 350 kg Mass: 1680x1420x1255mm Sputum width: 500 mm Duration wheel process: 15sec.

Condition: excellent (used), Year of construction: 1990, CO2 compressor Mehrer TZW50 piston compressor, compressor Year of manufacture: 1990 Pedpfx Ajrivkdecvopp Medium: CO2 Working pressure: 16 bar Operating speed: 540/min Engine power: 15 kW

Condition: used, Year of construction: 2004, Bottling Blower, PET Blowing Machine KRONES Including (preform tipper, preform hopper, preform unscrambler, chiller, air conveyors for bottle transport, year 2004) Model: Contiform S8 Year: 2004 Speed: 13,600 BPH Ppsdpfxowuyt Tj Acvjp Number of cavities: 8 Machine dimensions: Carousel 2000 mm x 2000 mm x 3000 mm (h) Oven 4000 mm x 2000 mm x 3000 mm Safety protections

Condition: excellent (used), Year of construction: 2014, We are offering an x2 ATLAS COPCO ZR 400 7.5 compressor with the following specifications: Ppedpfxeu Szu Ns Acvop Max working pressure: 7.5 bar Hours: 53000 Input power: 355 kW Rotational shaft speed: 1485 rpm Year of manufacture: 2014 The compressors were removed from a company that ceased operations. Additional Equipment Included: The compressors comes with x2 Atlas Copco air dryer, Model: MD1000 W CE, featuring: Max working pressure: 10.5 bar Year of manufacture: 2014 Please include your price offers directly when reaching out to us