15 kW screwcompressor 1.95 m³/min

ALMIG BELT XP 15

Condition: used, machine/vehicle number: 006835, Type of edging: Thin edge, Thick edge Trimming Unit: yes Max Panel Length: 55 mm Lsdpfx Asrl Utboh Eehc

Condition: used, Technical data: Max planing width: 230 mm Max planing height: 120 mm Spindle diameter: 40 mm Number of spindles: 5 Spindle sequence: down 5.5 kW right + left 11 kW up 7.5 kW universal 5.5 kW Each spindle on a separate motor Number of upper steel pulling rollers: 5 Number of upper rubber pulling rollers: 3 1 rubber roller in the table top Extraction port diameter: 150 mm Smooth feed adjustment: 4-24 m/min Cardan feed Table lubrication pump Pressure: 6 atm. Electric lifting of the body Power: 400V Overall dimensions: Length: 4240mm Ledpfxsmiik Te Ah Eehc Width: 1550mm Height: 1560mm

Condition: excellent (used), Year of construction: 2008, operating hours: 87,000 h, functionality: fully functional, overall weight: 775 kg, total length: 1,770 mm, total width: 900 mm, total height: 1,530 mm, fuel type: electric, volume flow: 190 m³/h, operating pressure: 8 bar, pressure (max.): 10 bar, noise level: 68 dB, type of cooling: air, Equipment: refrigerant dryer, Manufacturer: Kaeser ASD 32T screw compressor + refrigerant dryer serviced throughout!!! complete documentation Year of construction: 2008 Nominal pressure: 8 bar Lhsdpoi E H Ikefx Ah Esc air flow: 3.16 m3/min air flow: 189.6 /hour operating hours: Refrigeration dryer: ABT60 Compressed air connection: G 1¼ Voltage: 400V/3PH, 36A Power: 18.5 kW engine speed: 2945/min Ambient temperature: 3 / 45°C machine weight: 745 machine dimensions: 1,770 x 900 x 1,530 mm

Year of construction: 1990, condition: reconditioned (used), 4-sided planer unimat U23, 7 heads Lhjdpfx Ahopqxnxj Esc 4-sided Weinig 7-head planer, 7 universal arrangement: horizontal, lower vertical, right, left, vertical, right, vertical, upper horizontal, lower horizontal, and the last universal. The drive is realized by means of cardans. The drive is secured with Rotax clutches. Pressure of the element using pneumatics. Feed smoothly regulated by an inverter. Machine feed 0-42 m/min. 2.5 kW and 7.5 kW engines. Grinding table and a new one. Additionally, new wiring and new electrics. The machine has been completely renovated. Warranty .

Condition: new, functionality: fully functional, machine/vehicle number: 8153336470, overall weight: 616 kg, volume flow: 399 m³/h, pressure (min.): 4 bar, pressure (max.): 13 bar, noise level: 67 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, We are a company specializing in the compressed air industry for over 20 years. Professional level of service and high quality goods offered by our company - "proven" on the market - guarantee successful cooperation with you. We offer NEW screw compressor Atlas Copco GA37VSDs FF (variable speed with built-in dryer) Machine equipped with frequency converter (inverter), manufactured based on the latest technologies, which translates into greater efficiency and performance: On average 20% lower unit energy consumption (SER) than in previous models of the GA VSD series. Ecological and efficient VSD+ variable speed drive system reduces energy consumption by an average of 50% compared to models that operate at idle speed. Regardless of energy savings, efficiency (FAD) increases by up to 12%. Efficient fan motor (compliant with the ERP 2015 directive) reduces energy consumption and noise level. Superior Motor Efficiency (iPM) up to 94.5% exceeding IE3 efficiency levels. Built to work hard for your success. The industry-leading GA Series oil-injected rotary screw compressor delivers unmatched efficiency, high productivity and low cost of ownership – even in the harshest conditions. Technical data: capacity at 4 bar: 15.69- 13.75 l/s / 0.94-7.85 m3/min capacity at 7 bar: 15.67-129.35 l/s / 0.94-7.76 m3/min capacity at 10 bar: 15.68-110.79 l/s / 0.94-6.65 m3/min Max pressure 10 bar (13 Bar variant on request) Voltage 400 V Motor 37 kW Noise 67 dB(A) Weight 616 kg Motor with internal permanent magnets (IPM) Compression element Direct drive Innovative fan Separator/oil filter with durable construction Electronic water drain valve that does not cause compressed air losses Controller Elektronikon Inlet valve VSDs module Manufacturer code: 8153336470 If you are not sure whether the device is right for you, you have not found the right compressor, CALL! We will advise you on the right choice of device. Lhedpewlp Hdsfx Ah Ejc We invite you to familiarize yourself with our full offer.

Condition: excellent (used), Year of construction: 2010, operating hours: 75,000 h, functionality: fully functional, 55 kW compressor with built-in dryer and frequency inverter. Very good condition. After service. 3 months warranty. Lhodpfev Rmmmex Ah Eoc

Condition: excellent (used), Four-side planer Weinig Hydromat 23C Lhjdpfx Asxlcufjh Eoc Working width: 230 mm Working height: 160 mm Number of spindles: 7 Spindle arrangement: 1. Bottom 15 kW 2. Right 7.5 kW 3. Left 7.5 kW 4. Top 15 kW 5. Bottom 30 kW (multi-blade saw) 6. Bottom 7.5 kW (hydro support) 7. Top 7.5 kW (hydro support) Spindle speed: 6000 rpm Spindle diameter: 50 mm 4 feed rollers in the worktable Feed speed adjustable via frequency inverter up to 36 m/min Feed drive powered by cardan shaft Pneumatic pressure elements Technical documentation

Condition: excellent (used), Year of construction: 2001, SCREW COMPRESSOR BOGE S 20 MOTOR 15 KW PUMPING CAPACITY 2,06m3/min PRESSURE 10 BAR YEAR OF MANUFACTURE 2001 COMPRESSOR FULLY OPERATIONAL. Lodpogzv Epsfx Ah Eehc NET PRICE 8500,- GROSS PRICE 10455,- WE PROVIDE WARRANTY, SERVICE, REPAIRS.

Condition: good (used), Year of construction: 2008, machine/vehicle number: 0-260-20-1170, Kantfräs & kap Brandt Type: Optimat FTK 130 No: 0-260-20-1170 Year: 2008 The FTK 130 has been conceived as complementary to edge banding machines. The main application of the FTK 130 is shaped workpieces, where internal as well as external radie can be processed. Also straight workpieces can be easily processed. Shaped workpiece trimming technology For small shops the FTK 130 is offering a flexible and cost effectiv solution for their trimming requirements. In order to process internal and external shapes, the trimming motors are mountedvertically. Milling and cutting units for simultaneous upper and lower radius/clean milling of excess edging material on workpieces with straight edges and on rounded workpieces with internal and outside radie. Cutting unit to precisely cut excess front and back edge trim material. in the longitudinal direction of the working pressure. Techn info: Milling unit Workpiece thickness approx. 12-55mm Workpiece width min approx. 30mm Inner radius min.ca.35mm Edging thickness max. approx. 3mm Milling tool 2xWPL radius cutter r=3, diameter 67x21x16mm Milling motors 11000v/min Lhsdpfxoq Ehpao Ah Ejc Cutting unit Workpiece thickness 12-55mm The thickness of the edging material max. 3mm Saw blade diameter 100mm Sawing width 3mm Center hole 36mm Compressed air 6 bar, connection 1/2", approx. 2000PA Air consumption per stroke approx. 10NL Extraction power diameter 80mm, 510m3/h, air speed 28m/sec Current 400 volts, 2.5kw 50 hz, 3 phase, 16A Dimensions: 1130x765x1480mm (lxwxh) Weight 320 Kg Stock no: 2001877BXA

Condition: excellent (used), Year of construction: 2015, Screw compressor COMPAIR L80-A10 with Air Dryer Compressor: -Model: COMPAIR L80-A10 -Year of Manufacture: 2015 -Total operating time: 14,782 h -Pumping time: 13,216 h -Rated Voltage: 400V / 3Ph / 50Hz -Rated Power: 75 kW -Rotational Speed: 3000 rpm -Stage Pressure: 10 bar -Ambient Temperature Range: 1°C to 45°C -Dimensions L x W x H: 2158x1223x1971 mm -Weight: 2010 kg -Price: 7900€ Lhodpfx Ajwu Dhzeh Esc Air Dryer: -Model: COMPAIR F0460HS -Min/Max Air Pressure: 1/14 bar -Rated Voltage: 400V / 3Ph / 50Hz -Rated Power: 6,26 kW -Rated Current: 13,55 A -Ambient Temperature Range: 5°C to 50°C -Weight: 525 kg -Price: 2500€ The total price for both machines is 9900€ Tag: screw compressor, air dryer, industrial compressor, compressor for sale, used compressor, industrial equipment, efficient compressor, compressor with dryer, workshop compressor