Plate Bending Machine - 4 Rolls

AKBEND AHS 30/13

Condition: good (used), functionality: fully functional, Year of construction: 1995, working width: 4,100 mm, throat depth: 250 mm, overall weight: 20,000 kg, pressing force: 200 t, Hämmerle BM200-4100. The machine was dismantled at the old plant in 2023, but it was not reassembled or put into operation at the new site. Since then, the machine has been kept in storage. All accessories and documentation are included. The machine can be inspected at any time and is immediately available for loading. Lhsdpfx Aajwa S Dnslsd All data can be found in the pictures... No tools are included, as these were compatible with the new machine.

Condition: good (used), Year of construction: 2000, 1 used 4-roll sheet metal bending machine Brand: Stöting Type: VB 322 Serial number: 1591 Year of manufacture: 2000 With Acon control system Working length: 1000 mm Maximum sheet thickness: 12 mm Bending capacity: 8 mm Top roll diameter: 250 mm Bottom roll diameter: 210 mm Side roll diameter: 169 mm Dimensions: L: 3200 mm W: 1370 mm Height (without support arm): 1370 mm Drive power: 6.5 kW Lsdev Ibkbspfx Aalshd Weight: 3.2 tons

Condition: good (used), functionality: fully functional, Year of construction: 1995, load capacity: 70,000 kg, machine/vehicle number: 65068, Equipment: cabin, crane, low noise, Product Description Used truck mounted Terrian crane Manufactured by Tadano faun Model ATF70-4 Lodpfx Aaeul Uvujlohd Crane has a maximum Loading capacity of 70 ton Machine sold as its condition Operates on Diesel Engine More information Please contact VIJAY JPN Industrial Trading Pte Ltd 13A pandan crescent, Singapore 128478

Condition: used, functionality: fully functional, actuation type: hydraulic, roller (top) diameter: 420 mm, sheet thickness (max.): 25 mm, Hydraulic cylinder Brand: Casanova Bending length: 3,100 mm Maximum bending thickness: 25 mm Top roller diameter: 420 mm The side rollers are raised parallel, without inclination. New control and command panel, installed and modified in 2003. Lsdpfxsydk D Ho Aalshd Equipped with hydraulic flag and hydraulic side table. Pit dimensions: - 200x6800 mm - 555 mm depth

Condition: excellent (used), Technical Details: Working width: 3100 mm Maximum bending capacity: 16.0 mm Maximum pre-bending: 12.0 mm Top roll diameter: 300 mm Side roll diameter: 270 mm All three rolls powered Hardened rolls Conical bending device by tilting of both side rolls Swiveling control panel with digital display Hydraulic drop end bearing Lhodpsxyvx Tjfx Aaled Motor power: 7.5 kW Dimensions (L x W x H): approx. 5800 x 1700 x 1500 mm Net weight: approx. 8.5 tons The seller is not liable for typing or data transmission errors. The machine's appearance, technical condition, and wear correspond to its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1973, pressure 200 t chamfer lenght 3600 mm distance between columns 2650 mm dayligth 500 mm throat 300 mm stroke 250 mm working feed 10,5 mm/sec Lhjdpfot I D U Esx Aaled return speed 100 mm/sec ram stroke speed 150 mm/sec table height 900 mm oil volume 500 l total power requirement 37 kW weight of the machine ca. 17800 kg dimensions of the machine ca. 3710 x 1800 x 3390 mm Equipment: - Controlled axes Y1 + Y2 - Manual X-axis with digital position display - Set of upper and lower tools - 2x stop fingers - 2x front support arms - Hand and foot controls - Side + rear safety guard - Operating instructions

Condition: ready for operation (used), Press force: 250 t Lhsdpfxox Tr Ugj Aaljd greatest working length: 4050 mm equipped with CYBELEC DNC 70 PSG control

Condition: used, functionality: fully functional, Year of construction: 1970, control type: manual, bending force (max.): 75 t, working width: 3,000 mm, oil tank capacity: 150 l, Equipment: lower tooling, upper tooling, well-preserved Colly press brake, slight leakage at the right cylinder Lodpfjxpn Ewox Aalohd

Condition: good (used), Year of construction: 1993, machine/vehicle number: 9340020, Offer 26035 Technical Data - Three powered rollers, each roller hydraulically adjustable - Suitable for prebending and cone rolling, side arms can be swung out - Operation from a swiveling control panel with digital actual value displays - Max. working width: 3050 mm - Max. plate thickness at 400 N/mm² yield strength without prebending: 20 mm - Prebending at minimum bending diameter 5 x top roller diameter: 16 mm - Top roller diameter: 340 mm - Side roller diameter: 250 mm - Bottom roller diameter: 300 mm - Drive: 400 V / 9.5 kW - Working speed adjustable - Space requirement: approx. W 6200 x H 1650 x D 1650 mm - Machine weight: approx. 16,000 kg - Total weight (machine + support column + support arm): 19,500 kg - Includes: extended roller ends for mounting profile rollers, - conical bending device - lateral support arm hydraulically adjustable - upper support column hydraulically adjustable Lhsdpfxeyq E S Ee Aalod

Condition: excellent (used), Gas burner Weishaupt G5/1D 12x Existing Year: 1991 till 2004 Power 830Kw Мы говорим по русски! Viewing please only after telephone agreement! Preferred sale to dealers, traders or export. Ljdpfx Aasi Dh Ikolehd All information without guarantee, errors and prior sale reserved. The seller assumes no liability for typing and data transmission errors. Gladly we take your used boiler or burner in purchase! Of course we also take care of all formalities Loading possible